XboxHacker BBS
 
*
Welcome, Guest. Please login or register.
Did you miss your activation email?
June 19, 2013, 06:18:30 AM


Login with username, password and session length


Pages: 1
  Print  
Author Topic: NEED HELP!!!!!!!!  (Read 1739 times)
wisecat
Newbie
*
Posts: 4


View Profile
« on: January 27, 2008, 05:51:13 PM »

I am new to this site and the xbox 360 community and just registered to see if someone could PLEASE help!!!!!

I have been searching and searching for the last 4 days straight on exactly how to hack my xbox 360 samsung drive but there have been several different ways to do it but I can't find half of the software needed, the best easiest way to do this and I am frustrated. So I am turning to experts who could help me out. I have taken apart my xbox and have the Nforce sata chipset but don't know where to find any software and even which way would be my best route?Huh Could someone please help me out from the beginning so I can just play my xbox!!!! PLEASE!!!!

Thanks in advance!!!!!!
Logged
Arakon
Administrator
Xbox Hacker
*****
Posts: 6925


View Profile
« Reply #1 on: January 27, 2008, 06:10:09 PM »

search for xbins on google.
and what exactly is keeping you from playing your originals?
Logged

I do NOT give support by email, PM, ICQ or whatever. Anyone annoying me that way will have his balls removed. With a rusty butterknife. Slowly. And I'll enjoy doing it.
gigabite
Xbox Hacker
*****
Posts: 3089


.: Xplode Mods :.


View Profile WWW
« Reply #2 on: January 27, 2008, 06:13:55 PM »

Use #xbins on IRC (server efnet) to get ANY Xbox/Xbox 360 software (PC included) - use Xtreme Boot Maker to make yourself a custom hex edited mtkflash (make a text file, and rename the end to .bin) and select both ms28 options, copy it to C:...manually make a bootable floppy (right click, format, make dos..), go to C:\XBF\ and get mtkflash.exe and mtkflash.typ and put those on the floppy...turn of PC, unplug all drives except floppy...hook everything up (making sure you ground your Xbox 360) - boot your floppy....do mtkflash r orig.bin and press enter...when you get Xtreme Primary Number: x (x is usually 1, could be any number) turn off your 360...hold one finger on the power button and one on x (x being your number...usually one)...press them both at the exact same time and it should start reading...if not try again (turn off 360...then press escape) - once you done that, make sure you key is valid in firmware toolbox and your bin file is 256KB...do that and well go from there, don't understand any of it and you should not be attempting this

gigabite
Logged



.ISO  - he's a wannabe ... feel part of "t3h sc33n" yet ? QQ

coming 2009
Ge1st
Master Hacker
****
Posts: 265


View Profile
« Reply #3 on: January 27, 2008, 06:18:58 PM »

Hello,

obviously you haven't been looking hard enough if you cant get the info to firmware flash the samsung.

regardless,

I will give you steps since I am in a good mood)

1)Get the latest Textbook Tutorial (www.360mods.com and go to tutorial sections)
2)Read the Textbook Tutorial and specifically the Samsung section
3)Read it over and over until there is no more confusion

Note:

www.360mods.com is a good resource website.

Logged

if you look around, quite a few people have copied my sig...want to copy this ?
wisecat
Newbie
*
Posts: 4


View Profile
« Reply #4 on: January 27, 2008, 09:13:20 PM »



ok....well, i have been looking hard but in all the wrong places. i did find a very helpful tutorial that explains very well but the only issue i am having now is that my pc will not boot from my usb flash drive. i double checked to make sure it boots from a removable device. i used iprep and told it to make my usb drive bootable, could someone be able to help me with any configuration issues that i may be missing? any help would be greatly appreciated.


Hello,

obviously you haven't been looking hard enough if you cant get the info to firmware flash the samsung.

regardless,

I will give you steps since I am in a good mood)

1)Get the latest Textbook Tutorial (www.360mods.com and go to tutorial sections)
2)Read the Textbook Tutorial and specifically the Samsung section
3)Read it over and over until there is no more confusion

Note:

www.360mods.com is a good resource website.


Logged
Ge1st
Master Hacker
****
Posts: 265


View Profile
« Reply #5 on: January 28, 2008, 06:55:44 PM »

What do you mean it doesn't boot from the memory card? Did you try going through bios and do you know what bios is?

This project of firmware flashing is not that easy buddy. What drive do you have, do you have the VIA V6421 Card?
Logged

if you look around, quite a few people have copied my sig...want to copy this ?
wisecat
Newbie
*
Posts: 4


View Profile
« Reply #6 on: January 28, 2008, 07:20:01 PM »

me again.....yes, i know what a bios is and for some reason it will not boot from my usb when preparing it with iprep? not sure if i need to add any additional files to my usb drive for it to boot? i understand everything now but it is not booting from my usb drive. i checked to make sure it sees my flash drive and it does (kingston) but will not boot from it. if any suggestions please let me know.

thanks in advance
Logged
gigabite
Xbox Hacker
*****
Posts: 3089


.: Xplode Mods :.


View Profile WWW
« Reply #7 on: January 28, 2008, 09:19:54 PM »

manually make a bootable one, right click - format, dos bootable (and fvck iPrep) - if it boots...it's iPrep (also make sure you get rid of everything on the stick and only have the bootable files on there)

gigabite
Logged



.ISO  - he's a wannabe ... feel part of "t3h sc33n" yet ? QQ

coming 2009
wisecat
Newbie
*
Posts: 4


View Profile
« Reply #8 on: January 29, 2008, 06:59:34 AM »

ok...well xp and vista doesn't allow me to check make dos bootable?Huh i am using a kingston flash drive and i have tried 2 other generic ones as well. this is driving me nuts! is there another way to upgrade this firmware for a samsung drive? if so, please fill me in!!!!!!

thanks to who ever can help me (spoon feed me)
Logged
rossmichael
Hacker
***
Posts: 91


View Profile WWW
« Reply #9 on: January 29, 2008, 07:04:50 AM »

Remove the eeprom and progam it externally man.
......ahhh how do you do that,
« Last Edit: January 29, 2008, 07:10:44 AM by rossmichael » Logged

AusGameStore.com  We Mod Australia We are Engineers
Pages: 1
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC

Valid XHTML 1.0! Valid CSS! Dilber MC Theme by HarzeM