xbox 360 dashboard hangs help

[moshin111]

i was updating my xbox360 dashboard from the darkness. during flash my xbox 360 was turned off somehow when i turned it on again it displays the message updating then it says cant detect the disc when continued it says contact microsoft for the problem.
since my xbox is modded i cant give it to microsoft for the warranty i tried to update from the burned update disc to but no luck and i even cant go to xbox live since that dashboard wont go forward just gives me error.

[gigabite]

The only way to fix this problem currently is to send it back to M$ (unless you soldered in an infectus chip prior to updating, and dumped your kernel...then just re-flash it...but I doubt that) BUT, you may be lucky try a couple of things (might work) like, getting the latest update on your HDD then attaching it to your bad console OR reset the console with a code (sorry I can't rember it, not the clear cache code reset the console to clear updates - someone ?)  you can only hope !

gigabite

[lasonnette]

Or maybe it's just a broken cap at the back! Right, Gigabite? *cough*postwhore*cough*

[do0my]

Doing this is worth a try.

Clear Any Failed system updates that cause the console to error.
With the console off, press and hold the sync up button (the small white one)
While holding the sync button press the power button to turn on the console
Continue to hold the sync button until the Console has booted up completely.
During the boot process the console should clear any failed updates, allowing you to use it normally.

Could you explain "from the darkness"?  Is english your native language?

[hojjat_modder]

The only way to fix this problem just put the darkness game to xbox 360 and turned off console now turned it on again dashboard atuomatic update from the darkness game and run 

[lasonnette]

Doing this is worth a try.

Clear Any Failed system updates that cause the console to error.
With the console off, press and hold the sync up button (the small white one)
While holding the sync button press the power button to turn on the console
Continue to hold the sync button until the Console has booted up completely.
During the boot process the console should clear any failed updates, allowing you to use it normally.

Could you explain "from the darkness"?  Is english your native language?

,, from "The Darkness" "

you could try downgrading to your BK...read up on Robinsod's experiments from back in December or so...

edit: on second thought...if you were updating from < 4552 to the one on The Darkness and you didn't remove R6T3, it will probably have changed the efuse set...so no chance to go back...

[moshin111]

english is not my native language but can understand a little
i tried to update the dashboard through
the darkness game but 360 won't go forward i think it is not detecting the dvd drive

[moshin111]

Clear Any Failed system updates that cause the console to error.
With the console off, press and hold the sync up button (the small white one)
While holding the sync button press the power button to turn on the console
Continue to hold the sync button until the Console has booted up completely.
During the boot process the console should clear any failed updates, allowing you to use it normally.

[/quote]
i have tried it but no luck

[tochix]

try this, got to setting , memory  and click on the hard drive from the dash board the input this code x,x, lb, rb, x ,x and the system would carry out a maintenance on the system and restart then hold down the sync button till it boots up and u shld be fiine

[Arakon]

that will only wipe the HDD, it won't do anything to the flash.

[moshin111]

i have already said it wont go to dashboard it hangs on update then it say continue when i continue it wont detect disc and tells me to send the box to microsoft

[sasoseso]

what the error code that appare on screen

[moshin111]

no error it only says to update the dashboard but wont detect disc since dashboard is not going forward i cant go to xbox live