now, i did just backup my king kong, and i got my first coaster (disc is unreadable error) whats the likely cause of this? bad ss.bin ? improper image? (bad rip, scratched disc, etc) im not sure if i should just do it ALL over again

thomas
I've ran into the same troubles..
When I insert the disc into the box it spins for 30 secs, then the dashboard gives an 'disc unreadable error'. Im quite sure i followed the instructions as stated in the readme with the FW. BTW I used an NEC 3520AW(external USB) and Philips DL media (BTW , dvdinfopro gives both booktype and mediatype as dvd-rom)
I have the same problem. im using nec 3500AG firm. 2.1A ....disc spins longtime and 'disc unreadable error'
i used xtreme proper firmware inserted my key and flashed. originals work fine, so the flash was a succes ?
The problem is in the burning i think ? i tested the media fujifilm dvd+rDL"with burning a dual layer movie...works great
dvdinfo says
Media Information
Disc Regions are 1,2,3,4,5,6,7,8
Media code/Manufacturer ID RICOHJPN¬D0
Media Product Revision Number 01h
UDF Format Type V1.02
UDF Volume Name Black Cauldron
UDF Application id None
UDF Implementation id None
UDF Recording Date/Time (mm/dd/yyyy) 9/26/2002 16:06:09
Format Capacity 5.58GB(5.99GB)
Book Type DVD-ROM
Media Type DVD+R DL
Data area starting sector 30000h
Data area end sector 2C9C5Fh
Layer 0 end sector 194E2Fh
Linear Density 0.293um/bit
Track Density 0.74um/track
Number of Layers 2
Layer Track Path direction (OTP) Opposite track path
Complete Media Code
00000000 08 02 00 00 01 0F 32 10 00 03 00 00 00 FC FF FF ......2.........
00000010 00 19 4E 2F 00 00 00 52 49 43 4F 48 4A 50 4E 44 ..N/...RICOHJPND
00000020 30 30 01 40 25 25 37 11 00 34 64 00 34 64 20 21 00.@%%7..4d.4d !
00000030 0C 0D 12 12 02 01 01 10 00 20 21 0C 0D 12 12 02 ......... !.....
?