Xtreme firmware for TS-H943 Xbox 360 released!!!

[loon]

Silicon Image 3114R RAID controller on it

I think there is more than one place, even on this particular thread, that says si3112/3114 doesn't work.

I looked into this, the samsung drive does not allow you to flash with the silicon 3112/3114 chipset no matter what. The flash program was not designed to work with it. The LG/Hitachi drive can work on the 3112/3114 chipset on the other hand - but requires you to use the linux CD to force the drive into ModeB.

how can itell what chipset i have?

Look at the mobo... or the pci card

still cant find it, it is an onboard sata with four ports.Is ther away i can check in my computer?

[The M.A.R.T.]

Hello guy's I've been keeping up with all the 360 news for some time now also I wanted to say.....

1.Yes this will make me go out and get a 360 NOW!   &  Microsoft will make a ton now..Just think of how many people will fu$# there 360 up and half to get a new one and guys like me sitting back and just wateing for this to come out you can bet your sweet ass I get a Xbox 360 in the next few days!!!
                                                             AND!!!!
2.  Thanks for the hack!!!! I can just see the specialist when he loged on today and seen this hack on the net :

Let's hope you don't buy a Hitachi one then! Or even worse: the answer of MS at this all, a whole new drive which has new hardware protection...

[Pec]

I can confirm that Oblivion PAL works like a charm, dumped the ss, the iso and burned it to a disk....

[Arakon]

for those who can't get the drive detected, read the last 4 or so pages of the "samsung dump by software" thread, the info is all there.

[klexen]

I was having that problem in my HP comp, but when I tried it in my other comp with an ASUS board it worked.

Arakon, can you tell me what my key is from this

LINK REMOVED

With a program it tells me this it it. But I want to make sure.


BB BB BB FF FF FF FF FF FF FF FF FF FF FF FF FF

[carranzafp]

People dont post your binaries, it is the same as posting a hacked fw, it contains copyrighted code.   

Dont bother thinking wich is my key?   

Paste the full range between 4000 - until you see only FF's

[klexen]

01 11 11 11 11 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 02 ee ee ee ee bb bb bb ff ff ff ff ff ff ff ff ff ff ff ff ff 03 11 11 11 11 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 04 ee ee ee ee bb bb bb ff ff ff ff ff ff ff ff ff ff ff ff ff 05 11 11 11 11 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 06 ee ee ee ee bb bb bb ff ff ff ff ff ff ff ff ff ff ff ff ff 07 11 11 11 11 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 08 ee ee ee ee bb bb bb ff ff ff ff ff ff ff ff ff ff ff ff ff 09 11 11 11 11 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0a ee ee ee ee bb bb bb ff ff ff ff ff ff ff ff ff ff ff ff ff 0b 11 11 11 11 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0c ee ee ee ee f1 db f4 99 08 89 70 33 6e 58 11 4f 94 22 95 af ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

[Arakon]

at a first glance I'd say your key is f1 db f4 99 08 89 70 33 6e 58 11 4f 94 22 95 af, at least that is the only section that looks like a key at all.

[klexen]

Is it possible that I ripped the FW wrong? 2 different Keygens pull the same key from my backup file.

They both give me

BB BB BB FF FF FF FF FF FF FF FF FF FF FF FF FF

I don't want to flash my fw until I know I have the right key, and I made a success backup of my orig fw.

Please resond asap so I can get some sleep tonight. Sorry to be a pain...

[syd41]

Is it possible to burn with A DVD burner that does not support booktype to dvd-rom? I have pioneer 111d

Do some searching... I have a Pioneer DVR 109 and while it doesn't support bitsetting on DVD+R my research shows that it automatically sets DVD+R DL to DVD-ROM. Since you have to use DL for backups you may well be able to use your Pioneer. I haven't confirmed it for mine yet but I'm getting close... 

[Arakon]

@klexen: use a hexeditor and do a bit of reading, it was explained in some postings what the key's supposed to look like and in what area to look for it.. there will be only one part that is different enough to be the key.

as for the booktype setting on DL blanks with pioneer, the "hard way" to figure that out is to burn a +r DL disk, then use dvdinfopro or dvd identifier to check the booktype on the burnt disk.

[intox]

final got my firmware to dump
i used a dfi nf4 mb pluged pioneer 110 into ide channel
the i plugged x360 dvd into nf4 sata 4
then in bios i disabled raid on nf4 and also internal nf4 sata 1&2
then final boot from floppy and used patched nf4 mtkflash
then all i did was boot into dos and type mtkflash r /m orig .bin (but i had to make sure i put a space after the letter r for it to dump)
and that was it

[intox]

the only problem i have now is kdx1.1 wont load i get the following error
this application has failed to start because the application configuration is incorrect

[intox]

ok now got a working version of kdx-v1.1

[Pec]

Be sure that you dumped the right drive.....

[Rogero]

Hello
Please does anyone released some ss for NTSC games, I have lot of backups that need their ss to be burned
Also where can I find a compatibility list between region codes for titles.
Any help will be appreciated.. Thanks..

Rogero

[silverpalm]

hi guys ok im not in the gang so to speek on this site but please will someone for the love of god answer my question please what doi have to do it get a answer does mtkflash take awhiile to dump the f/w please thats all.

please will someone just anwers me i have been asking the same question all day yesterday.

[MacDennis]

Hello
Please does anyone released some ss for NTSC games, I have lot of backups that need their ss to be burned

Take them from your original.

This board is NOT for the discussion of piracy or related issues. Members making such posts will be warned and then banned. XboxHacker.Net is strongly against illegal duplication or distribution of copyrighted materials.

Also where can I find a compatibility list between region codes for titles.

Nowhere.

[silverpalm]

MacDennis please mate

does mtkflash take wahile to dump the drive's f/w please thats all mate or any1 i just need to know if the mtkflash takes awhile to dump or is it done in mins.

[MacDennis]

MacDennis please mate

does mtkflash take wahile to dump the drive's f/w please thats all mate or any1 i just need to know if the mtkflash takes awhile to dump or is it done in mins.

I don't know but I'm guessing that something is wrong when it takes more than a few minutes ..