|
ShaX5
|
 |
« Reply #460 on: October 22, 2007, 08:29:51 PM » |
|
I have :
- VIA 6421 card
- MSI 945GM3 Mother-board
- MS-7267 (V3.X) Main-board
- Intel 945G Express Chipset Based
- Intel Core 2 Duo
I have tried to get the firmware off my BenQ for many hours, if anyone can tell me if my hardware will work with this or not that would be great.
However if my hardware will not work, can somebody please give me the Exact name of a good motherboard that will work.
Thanks.
- ShaX5
|
|
|
|
|
Logged
|
|
|
|
|
kleeenerprinz
|
|
« Reply #461 on: October 23, 2007, 05:35:00 AM » |
|
i got today this mainboard "MSI K8N Neo4" and it works on the first try with DosFlash16 v1.3 beta (automode)
turn pc on
start usb drive with dosflash16 v1.3 beta
connect benq to sata controller (onboard nforce4)
turn on
start dosflash
it detect the benq and you say YES to send the command
you have to turn off the benq
you have to turn on the benq
and its detected and you can read + flash it
THANK YOU SCHTROM AND ALL OTHERS FOR THIS GREAT PIECE OF SOFTWARE
|
|
|
|
« Last Edit: October 23, 2007, 05:41:06 AM by kleeenerprinz »
|
Logged
|
|
|
|
Stelth
Newbie
Posts: 2
|
|
« Reply #462 on: October 23, 2007, 11:08:15 AM » |
|
sorry new to this stuff wht are the requirements except PC n Xb360 Benq  ?? |
|
|
|
|
Logged
|
|
|
|
achirinos
Newbie
Posts: 7
|
|
« Reply #463 on: October 23, 2007, 11:15:29 AM » |
|
i got today this mainboard "MSI K8N Neo4" and it works on the first try with DosFlash16 v1.3 beta (automode)
turn pc on
start usb drive with dosflash16 v1.3 beta
connect benq to sata controller (onboard nforce4)
turn on
start dosflash
it detect the benq and you say YES to send the command
you have to turn off the benq
you have to turn on the benq
and its detected and you can read + flash it
THANK YOU SCHTROM AND ALL OTHERS FOR THIS GREAT PIECE OF SOFTWARE
Are you doing this over D.O.S... WinXP? |
|
|
|
|
Logged
|
|
|
|
|
kleeenerprinz
|
|
« Reply #464 on: October 23, 2007, 01:23:04 PM » |
|
USB DRIVE - format as with Iprep und copy DosFlash on it
Spoofed the Hitachi47 with ToolBox 4.5 - insert the Benq Key - no problems - its running
|
|
|
|
|
Logged
|
|
|
|
achirinos
Newbie
Posts: 7
|
|
« Reply #465 on: October 23, 2007, 05:38:12 PM » |
|
USB DRIVE - format as with Iprep und copy DosFlash on it
Spoofed the Hitachi47 with ToolBox 4.5 - insert the Benq Key - no problems - its running
I dont get it... mind to elaborate? Thanx |
|
|
|
|
Logged
|
|
|
|
Stelth
Newbie
Posts: 2
|
|
« Reply #466 on: October 23, 2007, 06:30:52 PM » |
|
|
|
|
|
|
Logged
|
|
|
|
Bumpaneer
Newbie
Posts: 1
|
|
« Reply #467 on: October 23, 2007, 07:37:01 PM » |
|
USB DRIVE - format as with Iprep und copy DosFlash on it
Spoofed the Hitachi47 with ToolBox 4.5 - insert the Benq Key - no problems - its running
I dont get it... mind to elaborate? Thanx After a brief search at x-s try this link: http://forums.xbox-scene.com/index.php?showtopic=599152 |
|
|
|
|
Logged
|
|
|
|
|
ShaX5
|
|
« Reply #468 on: October 23, 2007, 08:32:05 PM » |
|
Got my ORIG.BIN file off my BenQ!!!!!!
- ShaX5
|
|
|
|
|
Logged
|
|
|
|
far327
Newbie
Posts: 1
|
|
« Reply #469 on: October 24, 2007, 05:36:04 AM » |
|
Hi everyone. So far I've been able to get my BenQ recognized using DosFlash16 auto v1.3 on my Nforce 550/570/590 Sata Controller. I haven't done any read/write/erase commands in DosFlash yet because of two reasons... a. I don't know for sure what my starting SATA port address is. I have 3 on board SATA controllers with 2 SATA inputs on each and 1 e-Sata input. Is it just the first one in the list under I/O? The readme says "0970" for Nvidia boards. My computer shows "0960" as the first in the list and DosFlash reports "09F0" as first in the list. Plus, DosFlash reads my BenQ as "B800"?? Any ideas? Here is a pic of my MSinfo32 results... Here is a pic of my DosFlash results... (I blacked out a few things, pay it no mind) b. What are the functions of each please... Just couldn't find it clearly defined anywhere. I usually just flash Sammy's and Hitachi's, never used DosFlash before. "DosFlash r" "DosFlash w" "DosFlash e" Thanks a ton everyone. Up until I read this topic, I thought I was doomed with a stock drive.!!!  P.S. (Just so others know, the DosFlash32 method would freeze up on me like some others who have posted. Your best bet is to use the bootable USB method if you have my chipset.) Used iPrep to make the bootable USB device. Wasn't even a flash drive. I used a Memory Stick with camera mate adapter. Link for iPrep USB bootable drive method. |
|
|
|
« Last Edit: October 24, 2007, 05:57:49 AM by far327 »
|
Logged
|
|
|
|
Stew_Pidt
Newbie
Posts: 4
|
 |
« Reply #470 on: October 24, 2007, 01:15:12 PM » |
|
MoBo - http://www.newegg.com/Product/Product.asp?Item=N82E16813188013 ******* Stay the F@$# away from corsair memory with this board to avoid nightmarish experience... Processor - http://www.newegg.com/Product/Product.asp?Item=N82E16819115026Running XP MCE w/SP2b WOW!!! This was amazingly smooth experience! 10 min Process, Double click dosFlash, 360 fwtb 4.5 and I'm and rolling with my sammy looking like a benny. Fully tested several backups.... Man I can't wait for the release of the iExtreme for the benny ...(sooo quiet, probably even more so with a "quiet-drive" version of the firm"). This Schtrom tool is absolute genius!! Works Like a charm... even one step updated my Kreon. BTW - no iPrep...or booting need ....smoooth as a freshly shaved HOO ha   PS I thought the program was hanging up on me too.. but after letting it run for 1 - 1/2 min program popped up even though no mem consumption was being reported... also enjoyed the "click yes, then power down 360, and turn it back on... BINGO!! 10 of 10 tries were a sucess, it showed up every time, testing BenQ, Sammy MS25, and Kreon SD-H163A....sheer genius,sheer genius! |
|
|
|
« Last Edit: October 24, 2007, 01:29:19 PM by Stew_Pidt »
|
Logged
|
|
|
|
|
lexie
|
|
« Reply #471 on: October 24, 2007, 01:36:39 PM » |
|
did anyone managed to flash their benq like a sammie?
greetz
|
|
|
|
|
Logged
|
|
|
|
ajay79
Newbie
Posts: 3
|
|
« Reply #472 on: October 24, 2007, 10:38:45 PM » |
|
|
|
|
|
|
Logged
|
|
|
|
skippy911
Newbie
Posts: 7
|
|
« Reply #473 on: October 25, 2007, 08:29:15 PM » |
|
Got it to work first time using windows xp, Gigabyte GA-8I945GZ motherboard and the Via 6421L addin card. I used dosflash32 and followed the instructions in the readme exactly and dumped the firmware twice. Worked like a charm Compared both flashes using windiff and check the key's in FW Toolbox and they are identical. Now just need iXtreme for benq and im set.
PS: I did not install the via drivers for the addin card in windows if that makes a difference.
|
|
|
|
|
Logged
|
|
|
|
achirinos
Newbie
Posts: 7
|
|
« Reply #474 on: October 26, 2007, 05:23:56 PM » |
|
Got it to work first time using windows xp, Gigabyte GA-8I945GZ motherboard and the Via 6421L addin card. I used dosflash32 and followed the instructions in the readme exactly and dumped the firmware twice. Worked like a charm Compared both flashes using windiff and check the key's in FW Toolbox and they are identical. Now just need iXtreme for benq and im set.
PS: I did not install the via drivers for the addin card in windows if that makes a difference.
How did you power on the drive?... Did U use the x360 to do it? Is it safe to do it that way? Thanx |
|
|
|
|
Logged
|
|
|
|
|
Arakon
|
|
« Reply #475 on: October 26, 2007, 05:38:30 PM » |
|
why wouldn't it be safe?
|
|
|
|
|
Logged
|
I do NOT give support by email, PM, ICQ or whatever. Anyone annoying me that way will have his balls removed. With a rusty butterknife. Slowly. And I'll enjoy doing it.
|
|
|
skippy911
Newbie
Posts: 7
|
|
« Reply #476 on: October 26, 2007, 07:24:18 PM » |
|
Got it to work first time using windows xp, Gigabyte GA-8I945GZ motherboard and the Via 6421L addin card. I used dosflash32 and followed the instructions in the readme exactly and dumped the firmware twice. Worked like a charm Compared both flashes using windiff and check the key's in FW Toolbox and they are identical. Now just need iXtreme for benq and im set.
PS: I did not install the via drivers for the addin card in windows if that makes a difference.
How did you power on the drive?... Did U use the x360 to do it? Is it safe to do it that way? Thanx Yes I did and I believe it is safe. |
|
|
|
|
Logged
|
|
|
|
achirinos
Newbie
Posts: 7
|
|
« Reply #477 on: October 26, 2007, 08:56:03 PM » |
|
Thanx bro... now I need a good tutorial to open my 360. Yeap, I'm a noob... but hell Im willing to learn
|
|
|
|
|
Logged
|
|
|
|
|
lexie
|
|
« Reply #478 on: October 27, 2007, 03:33:11 PM » |
|
hi all, a movie with the new ixtreme fimware in action! some are even talking about a release this night. I personally don't believe this, i think its after the fall update. The movie: http://www.youtube.com/watch?v=aUs_Kmc7XmcGreetz, Lexie |
|
|
|
|
Logged
|
|
|
|
Raptaure
Newbie
Posts: 4
|
|
« Reply #479 on: October 27, 2007, 10:00:17 PM » |
|
|
|
|
|
|
Logged
|
|
|
|
|
