I have a Benq 64930C, key was at E030. Used dosflash 1.1 (the dos version) with a Via 6421A sata pci card.
Took me 3 tries, but I got it.
So, I prepped an old Samsung MS25 drive. Took the original firmware of it. Put the key in there with firmware toolbox. Then created an iXtreme 1.2revC bin of it.
All that is left now, is to spoof it as my Benq ... correct ?
Someone else in this thread was so kind as to give the correct spoofing locations (thanks !) and I used that :
Spoof string in Benq fw @2CDE : 5042 4453 2020 2020 5641 4436 3033 382D 3634 3933 3043 PBDS VAD6038-64930C
Paste in Samsung ix1.2C fw @20BA.
Saved it, and flashed to the Samsung drive. But now every time I get a red light (bottom right), and no screen output.
I also replaced the [ by a . as some other member here suggested but to avail.
I repaired the traces on the Benq drive and put that back in, works like a charm, so I know the cables and the 360 itself are in perfect working order.
Anyone out there who can help me ?
p.s. Willing to mail my original firmware if anyone needs it (or can modify it for me ?
Edit : found it (thanks for the PM though radsy, I'll answer in a minute
). Stupid error on my side, I forget the 1F (put 00) as shown on page 10 (spoof1 as shown on http://modfreakz.byethost9.com/Temp/spoof1.jpg
). Anyway, all is peachy now !