|
SniperKil
|
 |
« Reply #220 on: April 26, 2006, 05:51:55 AM » |
|
but anyway, since anger said i would post more details... i hotswapped on my NEC 3520A dvd burner, with star wars episode 2 dvd1 original dvd.. (7.70GB).. loaded isobuster, set retrys to 1 on both options, started ripping, when it hit 7% it asked what to do with the bad sectors found, picked make dummy data, and told it to never ask again, got stuck on 7% for a few mins, then kept going, got stuck a few times from bad sectors.. took about 3 hours to rip.. while i was doing that, anger popped in halo 2 in his 605B and dumped the SS with the firmware posted.. after it was done ripping, i opened clonecd, and started a dump in that, then cancelled it, to get the image.dvd with the layer break, edited the image from isobuster to match the image.000 in the image.dvd, and deleted any other image.00# entrys.. using Geremia's calculations, we found the proper offset to go back to, inserted the SS at that sector using winhex, as well as the sector before and after, just for good luck  , saved the image... burned it on a verbatim dvd+r dl using clonecd, opening the image.dvd to burn... works great.. |
|
|
|
|
Logged
|
|
|
|
|
burgemaster
|
|
« Reply #221 on: April 26, 2006, 06:03:49 AM » |
|
think he called it "non working" not fake?
|
|
|
|
|
Logged
|
|
|
|
|
|
|
angerwound
|
|
« Reply #223 on: April 26, 2006, 06:15:35 AM » |
|
The new firmware contains Security Sectors while the other is firmware only. |
|
|
|
|
Logged
|
|
|
|
|
wans
|
|
« Reply #224 on: April 26, 2006, 06:35:48 AM » |
|
but anyway, since anger said i would post more details... i hotswapped on my NEC 3520A dvd burner, with star wars episode 2 dvd1 original dvd.. (7.70GB).. loaded isobuster, set retrys to 1 on both options, started ripping, when it hit 7% it asked what to do with the bad sectors found, picked make dummy data, and told it to never ask again, got stuck on 7% for a few mins, then kept going, got stuck a few times from bad sectors.. took about 3 hours to rip.. while i was doing that, anger popped in halo 2 in his 605B and dumped the SS with the firmware posted.. after it was done ripping, i opened clonecd, and started a dump in that, then cancelled it, to get the image.dvd with the layer break, edited the image from isobuster to match the image.000 in the image.dvd, and deleted any other image.00# entrys.. using Geremia's calculations, we found the proper offset to go back to, inserted the SS at that sector using winhex, as well as the sector before and after, just for good luck , saved the image... burned it on a verbatim dvd+r dl using clonecd, opening the image.dvd to burn... works great.. Glad you got it working, my disc is still ripping after about 9 hours! Bah  |
|
|
|
|
Logged
|
|
|
|
|
Geremia
|
|
« Reply #225 on: April 26, 2006, 06:44:37 AM » |
|
just a trick to speedup isobuster on bad sectors:
-carefully clean out jam and nutella from the disk surface
-go in isobuster option-comunication-read settings, set multiple block and single block transfer retry to 1
another note about drive crazy after swap: make sure your big dvd is OppositeTrackPath, or use a preburned DVD+R DL (it has the same phisical track pitch and path of original disk).
I used a samsung/toshiba SH-D162 drive
|
|
|
|
|
Logged
|
|
|
|
ViRAM
Newbie
Posts: 8
|
|
« Reply #226 on: April 26, 2006, 07:16:35 AM » |
|
The new firmware contains Security Sectors while the other is firmware only. Fair enough Can someone put it on xbins for example ? |
|
|
|
|
Logged
|
|
|
|
|
SniperKil
|
|
« Reply #227 on: April 26, 2006, 07:38:33 AM » |
|
|
|
|
|
|
Logged
|
|
|
|
|
silverpalm
|
|
« Reply #228 on: April 26, 2006, 07:42:31 AM » |
|
hi guys whats this hack for a non modded xbox or a modded xbox sorry to ask i never saw it on the 12 pages,also we cant get it here correct or is floating on one of the pages.
oh and roll on 360 but if he or others dont release its all cool its not for free games but to know that it has been hacked is great i love modding all my console just to know i can and others can keeps things in order.
just goes to show the people who make the firmware for m$ must get paided loads and there not as good as the people who beat them firmware love to reads about it.
|
|
|
|
|
Logged
|
|
|
|
cann0nf0dder
Newbie
Posts: 1
|
|
« Reply #229 on: April 26, 2006, 08:14:19 AM » |
|
as the admins removed several links to the file, perhaps this last a little bit longer, dunno  try 'Cracked Samsung FW v2' @ http://www.eurasia.nu had to use google for some time to find it  |
|
|
|
|
Logged
|
|
|
|
glimmerman
Newbie
Posts: 1
|
|
« Reply #230 on: April 26, 2006, 08:15:43 AM » |
|
Morons. If you count at the same acedemic level as you construct an English sentence, then that doesn't surprise me.
That's AC ADEMIC to you. The last FW release by this author was a fake/failure. As such, the author did not deserve the benefit of the doubt this time around. If this FW would have been fake/broken too, then TheSpecialist's analysis would have saved all of you a lot of broken drives and DL DVDs.
Quite illogical, and therefore not an ACADEMIC way of doing things. TheSpecialist analysed his FW with a preconceived bias. As such, he did not even bother to prove it wasn't working before he started telling everyone it couldn't work. This is not a process he learned at an ACADEMIC institution. Its simply quite clear that he had already decided it wouldn't work based on the previous FW not working. Whether he was right or wrong is frankly irrelevant. I didn't see any of you addressing TheSpecialist's 3 concerns about the FW. Some of you put blind faith in the author and it happened to pay off. Congratulations, you can take wild guesses. It's obvious that you people don't have a clue how to participate in a techincal discussion/debate. You're clearly not qualified to post in this section. So kindly dont.
Sadly it looks like you don't know about empiricism. ACADEMICALLY speaking of course. BTW, what I'm really advocating here is the following: Don't try elitist arguments in a technical forum. It won't take you very far. In the end its the facts and facts alone that should be used to judge contributions to a technical discussion. |
|
|
|
|
Logged
|
|
|
|
|
silverpalm
|
|
« Reply #231 on: April 26, 2006, 08:37:02 AM » |
|
as the admins removed several links to the file, perhaps this last a little bit longer, dunno try 'Cracked Samsung FW v2' @ http://www.eurasia.nu had to use google for some time to find it cheers mate also is this for the a non modded xbox or a modded xbox,i have a modded xbox and bro as a unmodded one so i will try both also is it l games or just the 4 games i have been following the forum but after 13 pages a little foggy now. so please someone could pm me how to maybe a sticky for other users the low down so to speek thank you |
|
|
|
|
Logged
|
|
|
|
|
Arakon
|
|
« Reply #232 on: April 26, 2006, 08:42:31 AM » |
|
the stupid bickering, accusing and bitching stops now. take that $#!t to PM or email or whatever. technical discussion only in this thread.
|
|
|
|
|
Logged
|
I do NOT give support by email, PM, ICQ or whatever. Anyone annoying me that way will have his balls removed. With a rusty butterknife. Slowly. And I'll enjoy doing it.
|
|
|
|
twizter
|
|
« Reply #233 on: April 26, 2006, 11:05:32 AM » |
|
thats my 2pence worth any hows back to the topic is this for a unmodded xbox or modded xbox
read the first page, this is firmware to get an unmodded XBOX with Samsung DVDROM's to work with specially crafted game images, which is the downside....but the upside is the compatibility with XBOX Live, so if you're soooooo addicted to xbox live and want to play burned games on xbox live, use this hack instead of....softmod/modchip/etc... |
|
|
|
|
Logged
|
|
|
|
|
SiliconIce
|
|
« Reply #234 on: April 26, 2006, 12:00:35 PM » |
|
On posting links to firmware:
Great work on the firmware guys. I am sure many people will want to take a look. However, due to legal reasons, I cannot allow links to be posted. The forums won't help anyone if they get taken down.
Back in the day, #xbins was a good place for people to find good homebrew software...
Please, no links. Things will end up in the "usual places" soon enough I am sure...
|
|
|
|
|
Logged
|
-- SiliconIce
|
|
|
|
Geremia
|
|
« Reply #235 on: April 26, 2006, 12:26:30 PM » |
|
Can Commodore4eva's ripping firmware rip SS also from x360 disc's?
SS is still at the same PSN FD021E as xbox1, this fw can dump also SS of xbox360 disks |
|
|
|
|
Logged
|
|
|
|
|
twizter
|
|
« Reply #236 on: April 26, 2006, 12:43:46 PM » |
|
Can Commodore4eva's ripping firmware rip SS also from x360 disc's?
SS is still at the same PSN FD021E as xbox1, this fw can dump also SS of xbox360 disks so your saying if you flash commodore4eva's SS fw to a xbox1 samsung dvdrom, and insert a xbox360 disc, it will return the SS? |
|
|
|
|
Logged
|
|
|
|
|
Geremia
|
|
« Reply #237 on: April 26, 2006, 12:51:42 PM » |
|
yes, already done
|
|
|
|
|
Logged
|
|
|
|
|
Arakon
|
|
« Reply #238 on: April 26, 2006, 12:55:32 PM » |
|
after 6 DL blanks and 2 days, it's finally working here too.. all cause of the SS being off by a single byte.
|
|
|
|
|
Logged
|
I do NOT give support by email, PM, ICQ or whatever. Anyone annoying me that way will have his balls removed. With a rusty butterknife. Slowly. And I'll enjoy doing it.
|
|
|
|
twizter
|
|
« Reply #239 on: April 26, 2006, 01:01:55 PM » |
|
based on all the information contained in the forums, is it possible to place the SS data on layer 0 (for Single Layer dvdrs), at some location prior to xbox data instead of just after it? and then a FW modification to read from the new location...?
|
|
|
|
|
Logged
|
|
|
|
|
