XboxHacker BBS
 
Home Help Search Login Register
*
Welcome, Guest. Please login or register.
Did you miss your activation email? 		June 19, 2013, 07:31:49 AM


Login with username, password and session length


XboxHacker BBS > Xbox 360 > XboxHacking - General (Moderators: SiliconIce, Arakon, Redline99) > Ms28 Stuck at Reading00%
Pages: 1
« previous next »
  Print  
Author Topic: Ms28 Stuck at Reading00%  (Read 1869 times)
chophouze
Newbie
*
Posts: 2


View Profile
« on: January 22, 2007, 06:49:09 PM »
First off i use xbootmaker 0.6 and the latest 360sam also i have the rosewill212 sata+ultra ata raidcontroller....i created custom mtkflast for it with boot maker.

1.Powered on pc with 360(sata unplugged)
2.reached dos prompt plugged in sata cable and typed samread xxxxxxx yyyyy
3.turned off 360 pressed 3.which is the 360 drive(im sure)
4.waited 10sec detected drive
4. stalled at reading....00%


help would be greatly appreciated maybe $10 paypal reward for problem solver
Logged
gigabite
Xbox Hacker
*****
Posts: 3089


.: Xplode Mods :.


View Profile WWW
« Reply #1 on: January 22, 2007, 06:57:03 PM »
Pull out all IDE cables except for floppy (if your using floppy), and connect the sata cable before turning on the PC and leave it connected, and use this command...mtkflash /sata r /m orig.bin

gigabite - hope that helps
Logged


.ISO  - he's a wannabe ... feel part of "t3h sc33n" yet ? QQ

coming 2009
chophouze
Newbie
*
Posts: 2


View Profile
« Reply #2 on: January 22, 2007, 07:27:34 PM »
now it says error cannot read input file
Logged
gigabite
Xbox Hacker
*****
Posts: 3089


.: Xplode Mods :.


View Profile WWW
« Reply #3 on: January 22, 2007, 07:31:35 PM »
forgot to mention, also don't use the samhack stuff... just use mtkflash /sata r /m orig.bin for backing up firmware and mtkflash /sata /m /w hacked.bin for applying hacked firmware

gigabite
Logged


.ISO  - he's a wannabe ... feel part of "t3h sc33n" yet ? QQ

coming 2009
Exist2Resist
Hacker
***
Posts: 71


View Profile
« Reply #4 on: January 23, 2007, 12:47:55 AM »
Is your MS28 drive connected to teh xbox still when flashing?
If so make sure you have a gator clip running to your PSU on your comp.
I have a friend who had the same problem, with flashing not reading though.
Could be the floating ground issue.
Logged
Never Give Up, Never Surrender !!!
scrano
Member
**
Posts: 39


View Profile
« Reply #5 on: January 23, 2007, 01:27:42 AM »
The error cannot read/open input file can appear when you leave the .bin extension of the file the file that your trying to flash/dump. e.g mtkflash r /m orig instead of mtkflash r /m orig.bin
Logged
gigabite
Xbox Hacker
*****
Posts: 3089


.: Xplode Mods :.


View Profile WWW
« Reply #6 on: January 23, 2007, 02:05:57 AM »
The reason I added the /sata command was so the drive could be detected.  Sometimes you cannot flash a drive without the /sata in my personal experience.

gigabite
Logged


.ISO  - he's a wannabe ... feel part of "t3h sc33n" yet ? QQ

coming 2009
scrano
Member
**
Posts: 39


View Profile
« Reply #7 on: January 23, 2007, 03:03:36 AM »
I don't have a problem with using the /sata command Gigabite mate. In fact like you said some people need it to flash/dump their drives firmware. I was just making an example with that command of how easy it is to leave the .bin extension of the end.
Logged
gigabite
Xbox Hacker
*****
Posts: 3089


.: Xplode Mods :.


View Profile WWW
« Reply #8 on: January 23, 2007, 07:09:37 AM »
Wink Yeap noticed that finally someone who doesn't flame people at every opportunity they get... as scrano basically said you must add the .bin after the command

gigabite
Logged


.ISO  - he's a wannabe ... feel part of "t3h sc33n" yet ? QQ

coming 2009
Pages: 1
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC

Valid XHTML 1.0! Valid CSS! Dilber MC Theme by HarzeM