0046dh

[DrWizz]

hello guys i recently flashed an 0046dh for a mate.

using GaryOPA - Xtreme v1.3 firmware - Hitachi 7in1 - v32/v36/v40/v46/v47/v58/v59
the flash finished %100 but only flashed 1 bank
upon testing the drive back in the 360 all seemed sweet till we tried a copy.
it seemed to be struggling to read the copy but was fine on originals......

weve tried several different blanks but they all have similar ends ....

was there ever an issue wiv the 46`s and reading copies or is there a possible problem withe the flash pack i used ?

any help please guys

[Arakon]

there is only one bank on hitachi drives.

[DrWizz]

is there

ok 1 bank but many sections in the firmware flash
im sure when i flashed an 0059 it patched many sections

but when i flashed the 0046 it only patched one then said done
i was just wondering if it was normal on the 0046 or did the flash miss summat ?

also has anyone got any ideas if the 0046 drive had any reading issues when reading backups

thnx again

[glaze83]

download the newest maximum-garyopa 2.3 and run restore.bat h (h being your drive letter)

once that is down, shut down your computer and your 360 and start from scratch, flashing the drive with flash16s.bat if you don't plan to use it to rip games or flash23s.bat if you do.

Cheers

Glaze83

[DrWizz]

thnx dude grabbing it now

[gigabite]

Also make sure your burning your back ups properly with the right regions and using high quality media (like Verbatim).  If you know of anyone else who has successfully done it then try and play one of there back ups (assuming they are from the same region),

gigabite