Volt on Samsung MS25 because dead Ebay Buy

[Dang3r81]

Hi,

sorry for my english.

I have bought a xbox 360 by Ebay. I opened it and i must see this.

I Thanks for the man who make this Picture.

The SST was in the drive with out solder.

Now i have soldering the SST. It was hard work. All lines are correct.



Now i have one problem. I Had no VCC.
Here is a Picture and i hope anyone can help me.



There are Numbers from 1 to 5. I need the Volt because I have by 1 2 3 5 = 0.13 V and by 4 0,82 or 2,81 and this is not right vor the GND on Capicator .

Please give me the correct Volt Numbers.

I say very thank you very much, when can help me anyone.

Dears
Dang3r

[jumba]

CE105 is  a supply bypass The black bar end is 0v (3) and 4 is +2.5v. 2 is 0v. 1 is a data line which can have any voltage between 0v & +5v. 5 is the same point as 2. Hope this helps

[Dang3r81]

Hey Thank you : )

Have you perhabs a Alternative Point for 1, because i think that my Number 1 Data Line have a bridge with 2.

The Point 2 goes legt to the green field with the " + " Is this right ?

Can i make Point 3 to Ground on the top left from the Board ? I have no points to solder.

Dears
Dang3r