FAIL FAIL FAIL

[saas474]

i tried to patch my LG47DH with 'Maximus-Garyopa_XTRM-HITACHI_v2_2_Stealth' & i always got "FAIL" ... treid 6 times without luck , then i start to restore my original (1st try fail but the 2nd done)
then i tried again but always same situation .... & to make it worse it won't restore (God i hate Fail)

what can i do now ?? 

[saas474]

can i turn off my 360 (with restoring fail) ?? i afraid that that the drive will die !!
pls HELP......

[saas474]

i am stuck !! anybody heeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeelp

[saas474]

patch : failed
restore : failed

but my back ups works now 
any 1 can tell me what is going on 

i wait more than 6 hours and there is no help from anyone 
how can it works with the 'evil FAIL'

thank for GOD

[eel]

when you restored, did give you all failed or just a few of the 9.
Because that happend with my restoreflashing, because those option he was trying to restore didn't include in my original firmware.

But when i flashed it with garyopa's 2.2 all 9/9 were ok.

Wich firmware did you flash your drive in the beginning?

[cyanide]

As long as it says 100% at the end, you dont have to worry. If it gets an error, it automatically reflashes until that step is done properly. It does that for all the 9 different modifications.

[digifred]

(1st try fail but the 2nd done)

Is your drive now flashed or not ?
Did it work the 2 time ? or step 2 worked ?
Is your drive in b-mode ?
Is your drive been seen in windows ?

When it is flashed and the backup works did you do the wire trick again to flash it ?

Greetz

Fred

[saas474]

thanks guys

when you restored, did give you all failed or just a few of the 9.
Because that happend with my restoreflashing, because those option he was trying to restore didn't include in my original firmware.

But when i flashed it with garyopa's 2.2 all 9/9 were ok.

Wich firmware did you flash your drive in the beginning?

-- few but final result 'fail'.
-- 'Maximus-Garyopa_XTRM-HITACHI_v2_2_Stealth'

As long as it says 100% at the end, you dont have to worry. If it gets an error, it automatically reflashes until that step is done properly. It does that for all the 9 different modifications.

-- i know but it always fail & after 3-5 tries my PC hangs.

(1st try fail but the 2nd done)

Is your drive now flashed or not ?
Did it work the 2 time ? or step 2 worked ?
Is your drive in b-mode ?
Is your drive been seen in windows ?

When it is flashed and the backup works did you do the wire trick again to flash it ?

Greetz

Fred

-- the program gave fail but yes it's flashed (Fail for both the only done i got for restoring)
-- step 2
-- yes
-- yes
-- no

i know my English is bad but thanx again for help.