programming hitachi tsop with programmer

[dreeee]

do i have to decrypt the dvd firmware or something before i transfer the file to a tsop chip via a willem programmer because i flashed the original firware back(programming ok)using a prorammer  but still don't work,and how to decrypt and encrypt firmware?And does it need to be encrypt or decrypt when i flash it back?  ???any tools or should firmtoolbox,kdx  do the job?need a little help cause can't understand whats wrong!   

[automan]

you have to encrypt the firmware with firmcrypt...google about that stuff..
then burn the chip with it and you're fine...

[dreeee]

 :)ok automan thanks for the tip,i will start googling ,encrypt with firmcrypt , let you know how it works out...........

[dreeee]

            working like a charm,and actually you can also decrypt and encrypt with firmwaretoolbox with one click,thanks for breaking the silence  Automan(ps2automan?)

[automan]

you're welcome...yep ps2automan  ...if you find automan or automan42 anywhere on the net it's probably me...

[sameh_nbd]

            working like a charm,and actually you can also decrypt and encrypt with firmwaretoolbox with one click,thanks for breaking the silence  Automan(ps2automan?)

hi dreeee which willem programmer version did you use ?
so i need to buy one...
and thanks

[cyclops69]

Hi,
I have used a Willem 3.1 with a 14mm adapter without any problems on 3 drives.
Feel free to check out my guide on http://www.unbrick360.co.uk/Recover_brick_hit.doc

Regards,
Cyclops

http://www.unbrick360.co.uk/

[dreeee]

willem pro 2,with 14mm adapter but the cheaper ones work just as well but I wanted the good stuff coz gonna being doing alot more of these ,here in Holland the pro 2 plus 14mm adapter cost E 150

nice guide cyclops very clear