Trying to figure out the problem I'm having getting this to work with the Samsung ts-h943 .
mtkflash detects no drive.
bios shows drive.
nothing ide is hooked up when i do this.
mtkflash is not modified . . . so i'm thinking that is the only problem I'm having .
I've got xtreme boot maker . . . but now I'm stuck with determining the device ID and i/o . . . here is my info . . . .
Name Standard Dual Channel PCI IDE Controller
Manufacturer (Standard IDE ATA/ATAPI controllers)
Status OK
PNP Device ID PCI\VEN_1002&DEV_437A&SUBSYS_1B341019&REV_80\3&61AAA01&0&88
I/O Port 0x0000FE00-0x0000FE07
I/O Port 0x0000FD00-0x0000FD03
I/O Port 0x0000FC00-0x0000FC07
I/O Port 0x0000FB00-0x0000FB03
I/O Port 0x0000FA00-0x0000FA0F
Memory Address 0xFE02F000-0xFE02F1FF
IRQ Channel IRQ 23
Driver c:\windows\system32\drivers\pciide.sys (5.1.2600.0 (XPClient.010817-1148), 3.25 KB (3,328 bytes), 8/4/2004 7:00 AM)
Name Primary IDE Channel
Manufacturer (Standard IDE ATA/ATAPI controllers)
Status OK
PNP Device ID PCIIDE\IDECHANNEL\4&10B866D9&0&0
Driver c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 8/4/2004 7:00 AM)
Name Secondary IDE Channel
Manufacturer (Standard IDE ATA/ATAPI controllers)
Status OK
PNP Device ID PCIIDE\IDECHANNEL\4&10B866D9&0&1
Driver c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 8/4/2004 7:00 AM)
Name Standard Dual Channel PCI IDE Controller
Manufacturer (Standard IDE ATA/ATAPI controllers)
Status OK
PNP Device ID PCI\VEN_1002&DEV_4379&SUBSYS_1B341019&REV_80\3&61AAA01&0&90
I/O Port 0x0000F900-0x0000F907
I/O Port 0x0000F800-0x0000F803
I/O Port 0x0000F700-0x0000F707
I/O Port 0x0000F600-0x0000F603
I/O Port 0x0000F500-0x0000F50F
Memory Address 0xFE02E000-0xFE02E1FF
IRQ Channel IRQ 22
Driver c:\windows\system32\drivers\pciide.sys (5.1.2600.0 (XPClient.010817-1148), 3.25 KB (3,328 bytes), 8/4/2004 7:00 AM)
Name Primary IDE Channel
Manufacturer (Standard IDE ATA/ATAPI controllers)
Status OK
PNP Device ID PCIIDE\IDECHANNEL\4&3B4ED969&0&0
Driver c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 8/4/2004 7:00 AM)
Name Secondary IDE Channel
Manufacturer (Standard IDE ATA/ATAPI controllers)
Status OK
PNP Device ID PCIIDE\IDECHANNEL\4&3B4ED969&0&1
Driver c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 8/4/2004 7:00 AM)
Name ATI IDE Controller
Manufacturer ATI Technologies Inc
Status OK
PNP Device ID PCI\VEN_1002&DEV_4376&SUBSYS_21401019&REV_80\3&61AAA01&0&A1
I/O Port 0x0000F300-0x0000F30F
Driver c:\windows\system32\drivers\pciide.sys (5.1.2600.0 (XPClient.010817-1148), 3.25 KB (3,328 bytes), 8/4/2004 7:00 AM)
Name Primary IDE Channel
Manufacturer (Standard IDE ATA/ATAPI controllers)
Status OK
PNP Device ID PCIIDE\IDECHANNEL\4&B097109&0&0
I/O Port 0x000001F0-0x000001F7
I/O Port 0x000003F6-0x000003F6
IRQ Channel IRQ 14
Driver c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 8/4/2004 7:00 AM)
Name Secondary IDE Channel
Manufacturer (Standard IDE ATA/ATAPI controllers)
Status OK
PNP Device ID PCIIDE\IDECHANNEL\4&B097109&0&1
I/O Port 0x00000170-0x00000177
I/O Port 0x00000376-0x00000376
Driver c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 8/4/2004 7:00 AM)
I've flashed a hitachi much easier than this on the same computer , so of course it has to be an issue with mtkflash , just not sure where to start with determining what and how to go on with adding my hardware into mtkflash .
I understand that it says it's IDE but really , nothing shows up under SCSI . . . . not sure why . . .
The motherboard is from elitegroup , rs485m-m with ati express 1100 .
Any help would be appreciated . If it's worthless to try using the onboard and have any better suggestions what to do please leave note of it, thanks.
Dilber MC Theme by HarzeM