XboxHacker BBS
 
*
Welcome, Guest. Please login or register.
Did you miss your activation email?
May 23, 2013, 03:41:49 AM


Login with username, password and session length


Pages: 1
  Print  
Author Topic: New Samsung Drive Brick Can Someone Help me  (Read 2624 times)
AVI
Newbie
*
Posts: 5


View Profile
« on: August 31, 2006, 01:03:22 AM »

Yesterday,I am Buy a new one Samsung Drive TS-H943A/MCAH,PART.NO:X800473-009,H/W:003,F/W=ms20,Ver.A.and change my old LGHitachi Drive.I has been flash with Xtreme32.All procedur to flash new drive I has been make complete with my Hitachi DVD Key.Flash with USBFlashdrive.When Finish flashing my new drive can't open disc tray and try to connect to my X360 have message error screen error 0064.
Please help me,Can I restore with orig.bin again,because now this drive can't detect in my PC.
Sorry for my bad english..... Angry Sad
My orig.bin F/W=20 my new firm already make with this org.bin is X32.bin F/W=25 (maybe This make my drive brick )
« Last Edit: August 31, 2006, 01:07:07 AM by AVI » Logged
jumba
Master Hacker
****
Posts: 167


View Profile
« Reply #1 on: August 31, 2006, 10:42:20 AM »

 My pc has nf3 chip set. Using mtkflash 1.83c under dos, have flashed same drive as your's to ms25 ver 3.0 with a  key from from a sammy that I let the smoke escape. The ms20 drive loaded with ms25 works fine. As tray is immobilized it definately contains a bad flash. It's easier with nf3 mobo to recover from this state. A simple test would be to do mtkflash c /sata and see if the flash chip can be seen. If it carn't then the mt1359se is in lock up mode like ms 19 or 28 f/w. The are 3 ways to recover
1 use a switch in place of r408 follow ms19 or 28 procedure
2 do a dual f/w mod switch to new blank rom
   do an unload of blank rom to a file erase.bin
   next do mtkflash w /sata erase.bin. As the
   blank is starts program throw the switch to
   the other bank this will erase the faulty bank.
  Now you can start again.
3 remove flash from sammy and erase and program thru
  a progammer
Logged
AVI
Newbie
*
Posts: 5


View Profile
« Reply #2 on: August 31, 2006, 11:21:41 AM »

How can I make or soldering switch to R408,please give me a link how to repair..thank's...
Logged
jumba
Master Hacker
****
Posts: 167


View Profile
« Reply #3 on: August 31, 2006, 10:30:30 PM »

 Roll Eyes
http://www.uploadfile.info/uploads/273bb0eef1.jpg
http://forums.xbox-scene.com/index.php?showtopic=535222
 Wink
Logged
AVI
Newbie
*
Posts: 5


View Profile
« Reply #4 on: September 02, 2006, 07:28:25 AM »

I has been try all method in forum.but still not detect in my PC Asus P5GL-MX Intel ICH6R Sata Controller.I try to another new Samsung Drive.Flash with xtreme 20.bang..... brick my drive again.Now,I don't know what can do,I am brick two drive
maybe have another way.........HuhHuh??
Logged
jumba
Master Hacker
****
Posts: 167


View Profile
« Reply #5 on: September 02, 2006, 11:01:13 PM »

Your problem is mobo intel chip set to catch flash access is difficult (ie a very small window). Try a gigabyte nforce 3 mobo its much better.
Logged
AVI
Newbie
*
Posts: 5


View Profile
« Reply #6 on: September 03, 2006, 04:19:47 PM »

maybe..Oke I try to buy this board...someone in my country give me solution to buy MB with VIA Chipset.Like you know,where is the best MB to flash samsung drive & repair brick samsung drive...
thank's first with your solution.. Wink Wink
Logged
Pages: 1
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC

Valid XHTML 1.0! Valid CSS! Dilber MC Theme by HarzeM