problem seeing xbox360 in windows

[mickyminx]

Hi

I have flashed my TS-H943 with the xtreme30.bin file, i can see my drive in my bios and as my pc boots, but not in windows, i have put in the 0800.iso disc which is on a dl media in and rebooted pc to enable 0800 mode but my drive is still not bieng seen under windows.

can anyone tell me what i am doing wrong please.

my set up is: TS-H943 and connectivity kit, pioneer 111d dl dvr, nforce sata2 on asrock mobo, xtreme30 with 0800.iso burned to dl media booktype is dvd-rom

kind regards. MM

[mickyminx]

Hi again

well i have found out what my problem is and i think i should share my findings as i bricked my dl lite-on, when realising what was happening i have managed to fix the drive

I looked at my original firmware in a hex editor, and the firmware that was copied was the one from my lite-on ide burner and not my ts-h943 drive, i then changed the ide drive for another and ran mtkflash and dumped my firmware again, looked at the dump and it had dumped the firmware for my pioneer 111d writer.

so my second question now is, my asrock k8nf4g mobo with onboard nf sata detects my ts-h943 drive in the bios and dos, so how do i get mtkflash to dump the right firmware?

thanks for looking. mm

[mickyminx]

hi yet again

Just thought i would let you all know that i have done it, my 360 now plays my backups. i used my 360 hdd and hotswap method on my via sata card.

thanks for all your help

mm