OPA : Xtreme v2.0 firmware : Hitachi : 7in1

[Zekes]

Gary,

Does your restore file put the key back in to the drive, I'm trying to put the same firmware on another hitachi, same version. I have a backup I'm just not sure of the procedure for doing this and don't want to brick it.

Thanks

[garyopa]

Gary,

Does your restore file put the key back in to the drive, I'm trying to put the same firmware on another hitachi, same version. I have a backup I'm just not sure of the procedure for doing this and don't want to brick it.

Thanks

All our releases don't touch the key area.

Do a search on here about "key transfer" and read.

It is very simple, just two commands.

One a "firmcrypt" on the file containing your drive key

And a "flashsec" command with the correct key values.

[mdd45]

Just Flashed my 47d from 2.0 to 2.1. Everything seems to work fine now (no E64 or reset on eject). Only problem still is the error message i get when trying to rip an original with isobuster. Here is a sample jpg of error when trying to rip halo 1:




Thx garyopa for this quick fix.... keep up!!!

[SailorM]

Did anyone successfully extract security sector for xbox 1 game and merge and successfully run the game?

[mdd45]

Did anyone successfully extract security sector for xbox 1 game and merge and successfully run the game?

I extracted ss.bin from xbox 1 (and xbox360) games with no problems with 2.1 but havent tried (by burning) if they actually work.....

[lilepic]

error <sense key=00/ASC=00/ASCQ=00>

This is the message i get when i try to extract the ss from a game . I have used both version of this firmware(2.0 and 2.1) and i have also tried getting my drive into modeB by using the conectivity kit and the method in the readme but both still do not work. If anyone has any ideas why this maybe or how to solve this i would be very greatful, for any input.

Iam using v47 drive and trying to extract HitMan:Blood Money

Thanks

[klipseracer]

Gary, Props once again, and thankyou for the quick fix. I will Let re-inform torrentspy.

[Phased]

Just Flashed my 47d from 2.0 to 2.1. Everything seems to work fine now (no E64 or reset on eject). Only problem still is the error message i get when trying to rip an original with isobuster. Here is a sample jpg of error when trying to rip halo 1:




Thx garyopa for this quick fix.... keep up!!!

Same issue here with the newest version of isobuster bought and registered.  I have ripped that program so many times I just bought it.

[PugNIP]

hey has anyone tried olaying dvd movies
2.0 i had to goto debug mode which played them great even the ones that had read problems.

drives a 47dh

2.1 pkays them without having to restart hey garyopa when it plays dvds does it read it the same way?


thanks
PugNIP.

[PugNIP]

also forgot to mention how did u get the 360 to stay open when switching it off in v2.0
because 2.1 doesnt allow it was tgat a bug?


PugNIP.

[Pandor]

So, has the getss.exe been reverse engeneerded yet?
Or do we atleast have an understanding of what it does, because i'm a linux user...

well, why not use IDA for that purpose  But I dont understand Win-code that well since I am using linux for several years (since Win f***ed up my partitions...)

If only it was that simple. I'm afraid that's a bit over my head...
Found some interesting post here though: http://www.xboxhacker.net/forums/index.php?topic=1789.20

ultimate goal, to reverse the getss.exe and make it a multi-platform C app.. any takers? 

[sepz]

What about the reading noise??? Click click click..

[AnT2nY]

error <sense key=00/ASC=00/ASCQ=00>

This is the message i get when i try to extract the ss from a game . I have used both version of this firmware(2.0 and 2.1) and i have also tried getting my drive into modeB by using the conectivity kit and the method in the readme but both still do not work. If anyone has any ideas why this maybe or how to solve this i would be very greatful, for any input.

Iam using v47 drive and trying to extract HitMan:Blood Money

Thanks

I got the same error with both 2.0 and 2.1 with a 47DJ (December 2005)... heres the log from both a xbox1 game and xbox360 game

XBOX 1 GAME

spectrum4eva SS dumper for firmware f900
-------------------------------------
id:   fd
type: 3
nn0: 0
seems OK
-------------------------------------
id:   46
type: 1
nn0: 0
seems OK
-------------------------------------
id:   41
type: ff
nn0: 1
error (SENSE KEY=00/ASC=00/ASCQ=00)




XBOX360 Game

spectrum4eva SS dumper for firmware f900
-------------------------------------
id:   a4
type: 3
nn0: 0
seems OK
-------------------------------------
id:   74
type: 1
nn0: 0
seems OK
-------------------------------------
id:   91
type: 3
nn0: 0
seems OK
-------------------------------------
id:   19
type: 1
nn0: 0
seems OK
-------------------------------------
id:   7e
type: 7
nn0: 0
seems OK
-------------------------------------
id:   11
type: 5
nn0: 0
seems OK
-------------------------------------
id:   6f
type: 7
nn0: 0
seems OK
-------------------------------------
id:   43
type: 5
nn0: 0
seems OK
-------------------------------------
id:   41
type: 0
nn0: 0
seems OK
-------------------------------------
id:   96
type: e0
nn0: 0
error (SENSE KEY=00/ASC=00/ASCQ=00)

I Even tried going back to orig.bin first then to 2.0 and 2.1 .. no diffence tho

Newya  .. gr8 work gary!

[vicaversa6921]

i got the same error message when trying to extract halo 2 with isobuster the end address feild contains an illegal value Cancel will proceed anyway!! I just clicked cancel twice and type game.iso hit enter and then select replace with all zeros and check always apply selection then hit selection its starts ripping the game but it goes very slowly last night it took like 40mins to extract 600mb. Not sure where i messed up. And i just re flashed to 2.1 and im getting the same results.

[dynt]

has anybody worked out how to get passed this error (SENSE KEY=00/ASC=00/ASCQ=00) while extracting ss i get it both in version 2.00 and 2.1 using xecutor connectivity kit drive 47d

[superlinux2001]

Hi, i've tried to extract ss.bin from my hitachi 47DJ,

used the following patch:

OPA : Xtreme v2.0 firmware : Hitachi : 7in1

this is what info i got out of dos screen?

C:\X-LG>getss d ss.bin
spectrum4eva SS dumper for firmware f900
-------------------------------------
id:   fa
type: 3
nn0: 0
seems OK
-------------------------------------
id:   be
type: 1
nn0: 0
seems OK
-------------------------------------
id:   1
type: 3
nn0: 0
seems OK
-------------------------------------
id:   96
type: 1
nn0: 0
seems OK
-------------------------------------
id:   56
type: 7
nn0: 0
seems OK
-------------------------------------
id:   c7
type: 5
nn0: 0
seems OK
-------------------------------------
id:   ef
type: 7
nn0: 0
seems OK
-------------------------------------
id:   2d
type: 5
nn0: 0
seems OK
-------------------------------------
id:   2f
type: 0
nn0: 0
seems OK
-------------------------------------
id:   d6
type: e0
nn0: 0
seems OK
-------------------------------------
id:   e5
type: f4
nn0: 0
challenge e5 not supported (type f4):
-------------------------------------
id:   c5
type: f7
nn0: 0
challenge c5 not supported (type f7):
-------------------------------------
id:   87
type: f0
nn0: 0
challenge 87 not supported (type f0):
-------------------------------------
id:   54
type: fc
nn0: 0
challenge 54 not supported (type fc):
-------------------------------------
id:   a9
type: f2
nn0: 0
challenge a9 not supported (type f2):
-------------------------------------
id:   ac
type: f3
nn0: 0
challenge ac not supported (type f3):
-------------------------------------
id:   f1
type: fb
nn0: 0
challenge f1 not supported (type fb):
-------------------------------------
id:   9f
type: fe
nn0: 0
challenge 9f not supported (type fe):
-------------------------------------
id:   7e
type: f1
nn0: 0
challenge 7e not supported (type f1):
-------------------------------------
id:   6a
type: f4
nn0: 0
challenge 6a not supported (type f4):
-------------------------------------
id:   5c
type: f2
nn0: 0
challenge 5c not supported (type f2):
-------------------------------------
id:   0
type: 0
nn0: 0
challenge 0 not supported (type 0):
-------------------------------------
id:   0
type: 0
nn0: 0
challenge 0 not supported (type 0):

ss dumped succefully to ss.bin, with 10 challenges/responses

but i don't now if this ss.bin gonna work.

[garyopa]

Hi, i've tried to extract ss.bin from my hitachi 47DJ,

used the following patch:

OPA : Xtreme v2.0 firmware : Hitachi : 7in1

this is what info i got out of dos screen?

C:\X-LG>getss d ss.bin
spectrum4eva SS dumper for firmware f900
-------------------------------------
seems OK
seems OK
seems OK
seems OK
seems OK
seems OK
seems OK
seems OK
seems OK
seems OK
challenge e5 not supported (type f4):
challenge c5 not supported (type f7):
challenge 87 not supported (type f0):
challenge 54 not supported (type fc):
challenge a9 not supported (type f2):
challenge ac not supported (type f3):
challenge f1 not supported (type fb):
challenge 9f not supported (type fe):
challenge 7e not supported (type f1):
challenge 6a not supported (type f4):
challenge 5c not supported (type f2):
challenge 0 not supported (type 0):
challenge 0 not supported (type 0):

ss dumped succefully to ss.bin, with 10 challenges/responses

but i don't now if this ss.bin gonna work.

It will not work.

First off, update your flash to v2.1 -- There was a small bug in v2.0 on the "unlock" area

Second, wait at least 15 seconds before running the GETSS command, you should hear
the disc spin up, then you can run the command.

[giglife]

59D not working
i have updated from 1.3 to 2.1 and it gives error screen when booting
i did a restore and then did it again same reslut

i flashed 47D and so one but this 59D will not work

[superlinux2001]

Hi garyopa,

thanks for reply. anyways it was! 

OPA : Xtreme v2.1 firmware : Hitachi : 7in1:

which i patched the hitachi drive, sorry for the wrong information i gave out in my previous reply.

i'll try it again see what happen's,

[GhettoChild]

I just have a question, when I extract the ss it gives me a few errors I guess you could say but I think that it may not work for some reason. Here is the log: C:\Documents and Settings\Compaq_Administrator\My Documents\X-LG>getss g ss.bin
spectrum4eva SS dumper for firmware f900
-------------------------------------
id:   b9
type: ff
nn0: 0
challenge b9 not supported (type ff):
-------------------------------------
id:   7c
type: 2
nn0: 0
seems OK
-------------------------------------
id:   d8
type: ff
nn0: 0
challenge d8 not supported (type ff):
-------------------------------------
id:   bf
type: 2
nn0: 0
seems OK
-------------------------------------
id:   6f
type: 3
nn0: 0
seems OK
-------------------------------------
id:   ef
type: 2
nn0: 0
seems OK
-------------------------------------
id:   40
type: 3
nn0: 0
seems OK
-------------------------------------
id:   65
type: 3
nn0: 0
seems OK
-------------------------------------
id:   fe
type: 1
nn0: 0
seems OK
-------------------------------------
id:   b2
type: 3
nn0: 0
seems OK
-------------------------------------
id:   a2
type: ff
nn0: 0
challenge a2 not supported (type ff):
-------------------------------------
id:   a0
type: 2
nn0: 0
seems OK
-------------------------------------
id:   4f
type: 1
nn0: 0
seems OK
-------------------------------------
id:   f3
type: 3
nn0: 0
seems OK
-------------------------------------
id:   de
type: 1
nn0: 0
seems OK
-------------------------------------
id:   f4
type: 1
nn0: 0
seems OK
-------------------------------------
id:   5
type: 0
nn0: 0
seems OK
-------------------------------------
id:   97
type: 0
nn0: 0
seems OK
-------------------------------------
id:   1e
type: 0
nn0: 0
seems OK
-------------------------------------
id:   c4
type: 0
nn0: 0
seems OK
-------------------------------------
id:   2
type: 0
nn0: 0
seems OK
-------------------------------------
id:   50
type: f1
nn0: 0
challenge 50 not supported (type f1):
-------------------------------------
id:   a4
type: 0
nn0: 0
seems OK