|
aross6
|
 |
« Reply #40 on: July 25, 2006, 02:37:18 PM » |
|
\nope, just flashed striaght over the top of the exsisting GaryOPA" Xtreme v1.2 firmware
Does this work just for the 46 or for the 46 & 47, etc? |
|
|
|
|
Logged
|
|
|
|
|
mcmanic
|
|
« Reply #41 on: July 25, 2006, 02:43:19 PM » |
|
Ok, I'm confused as all H$ll... I have a 47 and my friend has a 46, both patched using the previous version of Birdy Flasher, what do I have to do to both of ours to get the Geremia patch applied to them?
just run the birdy flasher and select firmware extreme 2.0 as its already patched and ready to go as long as it list your hitachi revison 46 or 47 ect,ect you should be good to go, thats all i did, didn't have to load patch or ppf anything, beforehand i had to use eject trick or av trick or controller trick. Now all i do is put game in and it loads 1st time. (hitachi 46dh) |
|
|
|
|
Logged
|
|
|
|
|
aross6
|
|
« Reply #42 on: July 25, 2006, 02:44:47 PM » |
|
Thank you very much!
|
|
|
|
|
Logged
|
|
|
|
linkoooo
Newbie
Posts: 3
|
|
« Reply #43 on: July 25, 2006, 02:47:57 PM » |
|
Hitachi driver in B open flasher.exe and choose patch.scp that's it?
|
|
|
|
|
Logged
|
|
|
|
|
xenon80
|
|
« Reply #44 on: July 25, 2006, 02:50:26 PM » |
|
do i still need a burner how is able to do bitsetting or can i now use any dl burner?
|
|
|
|
|
Logged
|
|
|
|
nraudigy2
Newbie
Posts: 8
|
|
« Reply #45 on: July 25, 2006, 02:54:51 PM » |
|
Unable to open script file Patch.scp error
trying to patch from GaryOPA Xtreme v1.2. on V46
where do i get patch.scp?
|
|
|
|
« Last Edit: July 25, 2006, 02:56:33 PM by nraudigy2 »
|
Logged
|
|
|
|
linkoooo
Newbie
Posts: 3
|
|
« Reply #46 on: July 25, 2006, 02:56:00 PM » |
|
Ok, I'm confused as all H$ll... I have a 47 and my friend has a 46, both patched using the previous version of Birdy Flasher, what do I have to do to both of ours to get the Geremia patch applied to them?
just run the birdy flasher and select firmware extreme 2.0 as its already patched and ready to go as long as it list your hitachi revison 46 or 47 ect,ect you should be good to go, thats all i did, didn't have to load patch or ppf anything, beforehand i had to use eject trick or av trick or controller trick. Now all i do is put game in and it loads 1st time. (hitachi 46dh) Don't need choose reverse.scp ? |
|
|
|
|
Logged
|
|
|
|
|
mcmanic
|
|
« Reply #47 on: July 25, 2006, 03:01:52 PM » |
|
Ok, I'm confused as all H$ll... I have a 47 and my friend has a 46, both patched using the previous version of Birdy Flasher, what do I have to do to both of ours to get the Geremia patch applied to them?
just run the birdy flasher and select firmware extreme 2.0 as its already patched and ready to go as long as it list your hitachi revison 46 or 47 ect,ect you should be good to go, thats all i did, didn't have to load patch or ppf anything, beforehand i had to use eject trick or av trick or controller trick. Now all i do is put game in and it loads 1st time. (hitachi 46dh) Don't need choose reverse.scp ? nope, you should have reverse.scp and patch.scp in same directory as flasher also aboutfirm.scp, it was posted here earlier as seperate download along with the flasher but removed, hope that helps |
|
|
|
|
Logged
|
|
|
|
djxxx
Member
Posts: 44
Big Brother Is Watching us 24/7
|
|
« Reply #48 on: July 25, 2006, 03:27:55 PM » |
|
Step by Step Instructions to Flash ya Xbox360 DVD-ROM
1.Restore your orig firmware to your dvd rom
2.run the flasher.exe program by birdy in Windows
3.Your dvd rom should be found so press GO.....
4.It then asks you if you want to back-up original f/w...Select destination to save
5.sit back and wait...Your dvd rom should be done in 40seconds or so....
|
|
|
|
|
Logged
|
|
|
|
|
aross6
|
|
« Reply #49 on: July 25, 2006, 03:33:59 PM » |
|
1.Restore your orig firmware to your dvd rom
Mcmanic said that you do not have to restore your original firmware to upgrade to the firmware w/ the Geremia patch He has verified this works... Have you upgraded to the firmware w/ the Geremia patch yet DJXXX? |
|
|
|
|
Logged
|
|
|
|
|
avengingangel
|
|
« Reply #50 on: July 25, 2006, 03:36:25 PM » |
|
Step by Step Instructions to Flash ya Xbox360 DVD-ROM
1.Restore your orig firmware to your dvd rom
2.run the flasher.exe program by birdy in Windows
3.Your dvd rom should be found so press GO.....
4.It then asks you if you want to back-up original f/w...Select destination to save
5.sit back and wait...Your dvd rom should be done in 40seconds or so....
I've never flashed my drive and have been reading and reading and reading trying to get all my facts straight. Where I'm confused is with this Birdy Flasher.. Is this as simple as it seems ? Does this application automatically extract your drive key, patch it to the firmware and then write it all ? Or is there still some prep work required prior to using this ? I'm asking this because modding your drive's firmware has evolved sooo much since it was 1st made available and most of the step by steps include using DOS, having to dump your drive key and patch firmware. I haven't seen a step by step for someone who has never modified their firmware yet and wants to use Birdy Flasher to do so.. A quick tutorial for someone who is preparing to flash their drive for the 1st time using Birdy Flasher would be greatly appreciated. Thanks. |
|
|
|
« Last Edit: July 25, 2006, 03:38:30 PM by avengingangel »
|
Logged
|
|
|
|
nraudigy2
Newbie
Posts: 8
|
|
« Reply #51 on: July 25, 2006, 03:37:17 PM » |
|
Nice job, it works on V46 with Xtreme 1.2 upgraded. Backups load just as fast as original now. No tricks watsoever. Tried Verbatim, Memorex, and Fuji. All loaded with no tricks. Using Poineer 111D though.
|
|
|
|
« Last Edit: July 25, 2006, 03:39:41 PM by nraudigy2 »
|
Logged
|
|
|
|
|
aross6
|
|
« Reply #52 on: July 25, 2006, 03:38:29 PM » |
|
Nice job, it works on V46 with Xtreme 1.2 upgraded. Backups load just as fast as original now. No tricks watsoever.
Did you restore your original firmware first or just flash over it with the new? |
|
|
|
|
Logged
|
|
|
|
|
aross6
|
|
« Reply #53 on: July 25, 2006, 03:40:26 PM » |
|
A quick tutorial for someone who is preparing to flash their drive for the 1st time using Birdy Flasher would be greatly appreciated.
-Hook up your DVD Drive to your PC -Get your DVD drive into ModeB (using SLAX CD) -Boot into Windows -Run Flasher.exe -Enjoy |
|
|
|
|
Logged
|
|
|
|
nraudigy2
Newbie
Posts: 8
|
|
« Reply #54 on: July 25, 2006, 03:44:01 PM » |
|
Nice job, it works on V46 with Xtreme 1.2 upgraded. Backups load just as fast as original now. No tricks watsoever.
Did you restore your original firmware first or just flash over it with the new? Just patch straight from GARYOPA XTREME v1.2 to v2.0 but you will need patch.scp file. The download provided here doesn't have it. Got it from private sites. |
|
|
|
|
Logged
|
|
|
|
|
avengingangel
|
|
« Reply #55 on: July 25, 2006, 03:46:14 PM » |
|
Wow !! thanks for the quick response !! I have the executer Drive connectivity kit so Mode B is just a matter of pressing a button. What about that SCPcreator.exe ? Also what about patch.scp and restore.scp ? Does anything need to be done with these files prior to running flasher.exe ? A quick tutorial for someone who is preparing to flash their drive for the 1st time using Birdy Flasher would be greatly appreciated.
-Hook up your DVD Drive to your PC -Get your DVD drive into ModeB (using SLAX CD) -Boot into Windows -Run Flasher.exe -Enjoy |
|
|
|
|
Logged
|
|
|
|
|
aross6
|
|
« Reply #56 on: July 25, 2006, 03:48:45 PM » |
|
What about that SCPcreator.exe ?
Also what about patch.scp and restore.scp ?
Does anything need to be done with these files prior to running flasher.exe ? Put them in the same directory as flasher.exe, that is all! |
|
|
|
|
Logged
|
|
|
|
|
sepz
|
|
« Reply #57 on: July 25, 2006, 03:49:51 PM » |
|
A quick tutorial for someone who is preparing to flash their drive for the 1st time using Birdy Flasher would be greatly appreciated.
-Hook up your DVD Drive to your PC -Get your DVD drive into ModeB (using SLAX CD) -Boot into Windows -Run Flasher.exe -Enjoy Yep, but the problem is: if you want to turn it back later to you original firmware, what program should you use? The xtreme 1.2 BIRDY_HITACHI or this flash.exe? |
|
|
|
|
Logged
|
|
|
|
nraudigy2
Newbie
Posts: 8
|
|
« Reply #58 on: July 25, 2006, 03:50:37 PM » |
|
I am missing restore.scp. I guess I need it to restore firmware later when new firmwares come out?
|
|
|
|
|
Logged
|
|
|
|
|
aross6
|
|
« Reply #59 on: July 25, 2006, 03:51:50 PM » |
|
Yep, but the problem is: if you want to turn it back later to you original firmware, what program should you use? The xtreme 1.2 BIRDY_HITACHI or this flash.exe?
BIRDY_HITACHI is flasher.exe. The program makes an automatic backup of your original firmware and provides an option to restore it if you wish! |
|
|
|
|
Logged
|
|
|
|
|
Dilber MC Theme by HarzeM