problems on extracting the original fw with mtkflash (ts drive)

[xenon80]

hello, i have got a big problem flashing my toshiba drive  (ms25) for 360.
i have got the following sata chipset ULi SATA/RAID Controller (M1689/M1567).
the 360 dvddrive is recognised is the bios.

when i do the mtkflash with mtkflash r /m /sata c:\orig.bin , i get no command to choose between master or slave.
after a while i just get this message  "Port:170, Master/Slave: a0"

he just don't read my drive firmware. i use the xtreme connectivity kit. but i also tried to connect the drive direct to my board and patched the mtkflash by extracting this bytes "B910 8952 00EC 00E0" from c:\windows\system32\drivers\m5289.sys .
but it did not work. everything as before.

what else can i try?

i started the pc with a bootable cd from my ide dvd drive.