[accidently in wrong board. sorry.]Replacing NAND chip

[cod4ever234]

Alright, So i have searched through several pages and haven't found someone who has a problem quite similar to mine. I have a console with a physically damaged NAND Chip, I have an old clean full dump from the chip. What happened is, And this is slightly embarrassing is after a bad flash to the original nand on the board. i tried to use it again. While trying to bidge the pins somehow i bent some and now the chip is beyond repair.

I have a replacement chip. I was wondering

1) If i wright a full dump from the original back to the new chip using a progskeet. Will the console boot if i resolder the newly programmed chip. I dont have the cpu key and i havnt been able to get RGH2 to work on this console.

2) i dont know if anyone has any experience with progskeet, but im trying to bench program the chip and while it id's the chip correctly it allways hangs on Block 0 when trying to read or wright or erase. Ive tried this with multiple chips also.

Sorry for the long post if anyone has any help though that wold be great.

[justmeee]

progskeet / infectus are only good on small block nands (16MB). what have you done with the original nand? its not easy to get it damaged

[playonlcd]

progskeet / infectus are only good on small block nands (16MB). what have you done with the original nand? its not easy to get it damaged

It can handle 256/512 MB nands.
But as i read here, needs some conversion.

Anyway, RGH is out for xbox 360 FAT with  dashboard higher than 2.0.15574 now; for anyone whose  reading.

[justmeee]

Infectus and progskeet are like car's without tires an bigblock nands.