Need help with getting key codes for DVD drives off motherboards

[phonsey]

We are stuck trying to program the cr chip. Can we use the usb jtag spi to flash it? There are posts that say yes and no so we hope somebody has a definite answer. If we need a jtag cable or a device like nand-x, please let us know.

[tpaxbox]

Biting the bullet and getting Xecuter Nand-X Rgh Edittion for XBOX 360 http://www.eforchina.com/view/79410/Nand-X-&-JTAG-Connection-Kit-for-XBOX-360--Xecuter-.htm?source=linkshare&siteID=j7HtbwFjMlY-f0xK_vI7RRqgGi2RoQ8jIg
and we hope this solves the problem with programming the cr II chip. We are having issues with soldering the stby_clk c3b2 and cpu_pll_bypass r7r17 and hope the qsb will make this easier to solder these points. What type of solder flux is best, paste or no clean, to use in this application? The paste seems to be the easiest to work with for wires and headers but don't know about qsb's.

Thanks again for all the help so far.

[phonsey]

Biting the bullet and getting Xecuter Nand-X Rgh Edittion for XBOX 360 http://www.eforchina.com/view/79410/Nand-X-&-JTAG-Connection-Kit-for-XBOX-360--Xecuter-.htm?source=linkshare&siteID=j7HtbwFjMlY-f0xK_vI7RRqgGi2RoQ8jIg
and we hope this solves the problem with programming the cr II chip. We are having issues with soldering the stby_clk c3b2 and cpu_pll_bypass r7r17 and hope the qsb will make this easier to solder these points. What type of solder flux is best, paste or no clean, to use in this application? The paste seems to be the easiest to work with for wires and headers but don't know about qsb's.

Thanks again for all the help so far.

buy this its cheaper and does the same job

http://www.ck3.co.uk/xecuter-xilinx-lpt-jtag-cable.html

[tpaxbox]

Got the Nand x and soldered in the qsb's but having issues with the dump and creation of ecc file in jrunner. this is what we get
Flash Config: 0x01198010
Reading Nand to C:\Documents and Settings\user\Desktop\xbox\final software\J-Runner v02 (278) Core Pack\J-Runner v02 (278) Core Pack\output\nanddump1.bin
Reading Nand
Error: 250 reading block 52
Error: 250 reading block 90
Done!
in 2:09 min:sec

Reading Nand to C:\Documents and Settings\user\Desktop\xbox\final software\J-Runner v02 (278) Core Pack\J-Runner v02 (278) Core Pack\output\nanddump2.bin
Initializing Nand..
Header is wrong..
Reading Nand
Nand Initialization Finished
Error: 250 reading block 52
Error: 250 reading block 90
Done!
in 2:11 min:sec

Initializing Nand..
Header is wrong..
Nand Initialization Finished
Initializing Nand..
Header is wrong..
Nand Initialization Finished
Version: 03

Flash Config: 0x01198010
Reading Nand to C:\Documents and Settings\user\Desktop\xbox\final software\J-Runner v02 (278) Core Pack\J-Runner v02 (278) Core Pack\output\nanddump1.bin
Reading Nand
Error: 250 reading block 52
Error: 250 reading block 90
Done!
in 2:08 min:sec

Reading Nand to C:\Documents and Settings\user\Desktop\xbox\final software\J-Runner v02 (278) Core Pack\J-Runner v02 (278) Core Pack\output\nanddump2.bin
Initializing Nand..
Header is wrong..
Reading Nand
Error: 250 reading block 52
Error: 250 reading block 90
Done!
in 2:08 min:sec

Comparing...
Bad Block ID @ 0x0052 [Offset: 0x152400]
Bad Block ID @ 0x0090 [Offset: 0x252000]
Bad Block ID 0052 Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID 0090 Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0052 [Offset: 0x152400]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 0090 [Offset: 0x252000]
Bad Blocks Remapped
Bad Block ID @ 0x0052 [Offset: 0x152400]
Bad Block ID @ 0x0090 [Offset: 0x252000]
Bad Block ID 0052 Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID 0090 Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0052 [Offset: 0x152400]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 0090 [Offset: 0x252000]
Bad Blocks Remapped
Initializing Nand..
Header is wrong..
Comparing...
Bad Block ID @ 0x0052 [Offset: 0x152400]
Bad Block ID @ 0x0090 [Offset: 0x252000]
Bad Block ID 0052 Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID 0090 Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0052 [Offset: 0x152400]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 0090 [Offset: 0x252000]
Bad Blocks Remapped
Bad Block ID @ 0x0052 [Offset: 0x152400]
Bad Block ID @ 0x0090 [Offset: 0x252000]
Bad Block ID 0052 Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID 0090 Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0052 [Offset: 0x152400]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 0090 [Offset: 0x252000]
Bad Blocks Remapped
Initializing Nand..
Header is wrong..
* unpacking flash image, ....
ECC'ed - will unecc.
UnECC'ed
* found decrypted CD
* found XeLL binary, must be linked to 0x1c000000
 * we found the following parts:
SMC: 117.78
CB_A: missing
CB_B: missing
CD (image): missing
CD (decrypted): 8453
Failed to create ecc image

Looked online and they said error 250 is only an issue if it's in the first 50 blocks, Y/N?
we got the coolrunner 2 and can't find a good diagram for wiring it to a phat box. Plenty on cr1 but not so much on cr2 chip. is this another wiring issue? we used the qsb for phat's and it made it easier. Using no-clean flux for connections but we want to make sure we're doing it right and not wasting more money. We don't have a lpt port on this pc and hope to get this figured out using the nand x since it's the most popular solution using usb. Has anyone had similar issues?

[phonsey]

Got the Nand x and soldered in the qsb's but having issues with the dump and creation of ecc file in jrunner. this is what we get
Flash Config: 0x01198010
Reading Nand to C:\Documents and Settings\user\Desktop\xbox\final software\J-Runner v02 (278) Core Pack\J-Runner v02 (278) Core Pack\output\nanddump1.bin
Reading Nand
Error: 250 reading block 52
Error: 250 reading block 90
Done!
in 2:09 min:sec

Reading Nand to C:\Documents and Settings\user\Desktop\xbox\final software\J-Runner v02 (278) Core Pack\J-Runner v02 (278) Core Pack\output\nanddump2.bin
Initializing Nand..
Header is wrong..
Reading Nand
Nand Initialization Finished
Error: 250 reading block 52
Error: 250 reading block 90
Done!
in 2:11 min:sec

Initializing Nand..
Header is wrong..
Nand Initialization Finished
Initializing Nand..
Header is wrong..
Nand Initialization Finished
Version: 03

Flash Config: 0x01198010
Reading Nand to C:\Documents and Settings\user\Desktop\xbox\final software\J-Runner v02 (278) Core Pack\J-Runner v02 (278) Core Pack\output\nanddump1.bin
Reading Nand
Error: 250 reading block 52
Error: 250 reading block 90
Done!
in 2:08 min:sec

Reading Nand to C:\Documents and Settings\user\Desktop\xbox\final software\J-Runner v02 (278) Core Pack\J-Runner v02 (278) Core Pack\output\nanddump2.bin
Initializing Nand..
Header is wrong..
Reading Nand
Error: 250 reading block 52
Error: 250 reading block 90
Done!
in 2:08 min:sec

Comparing...
Bad Block ID @ 0x0052 [Offset: 0x152400]
Bad Block ID @ 0x0090 [Offset: 0x252000]
Bad Block ID 0052 Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID 0090 Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0052 [Offset: 0x152400]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 0090 [Offset: 0x252000]
Bad Blocks Remapped
Bad Block ID @ 0x0052 [Offset: 0x152400]
Bad Block ID @ 0x0090 [Offset: 0x252000]
Bad Block ID 0052 Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID 0090 Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0052 [Offset: 0x152400]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 0090 [Offset: 0x252000]
Bad Blocks Remapped
Initializing Nand..
Header is wrong..
Comparing...
Bad Block ID @ 0x0052 [Offset: 0x152400]
Bad Block ID @ 0x0090 [Offset: 0x252000]
Bad Block ID 0052 Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID 0090 Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0052 [Offset: 0x152400]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 0090 [Offset: 0x252000]
Bad Blocks Remapped
Bad Block ID @ 0x0052 [Offset: 0x152400]
Bad Block ID @ 0x0090 [Offset: 0x252000]
Bad Block ID 0052 Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID 0090 Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0052 [Offset: 0x152400]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 0090 [Offset: 0x252000]
Bad Blocks Remapped
Initializing Nand..
Header is wrong..
* unpacking flash image, ....
ECC'ed - will unecc.
UnECC'ed
* found decrypted CD
* found XeLL binary, must be linked to 0x1c000000
 * we found the following parts:
SMC: 117.78
CB_A: missing
CB_B: missing
CD (image): missing
CD (decrypted): 8453
Failed to create ecc image

Looked online and they said error 250 is only an issue if it's in the first 50 blocks, Y/N?
we got the coolrunner 2 and can't find a good diagram for wiring it to a phat box. Plenty on cr1 but not so much on cr2 chip. is this another wiring issue? we used the qsb for phat's and it made it easier. Using no-clean flux for connections but we want to make sure we're doing it right and not wasting more money. We don't have a lpt port on this pc and hope to get this figured out using the nand x since it's the most popular solution using usb. Has anyone had similar issues?

do you have the coolrunner installed while your try to dump nand if so that could be your problem! remove 3.3v wire from coolrunner and try again!