Program Squirt With a Nand-x

Home

Help

	Welcome, Guest. Please login or register. Did you miss your activation email?	May 22, 2013, 12:21:00 AM
		Login with username, password and session length

XboxHacker BBS > Xbox 360 > XboxHacking - General (Moderators: SiliconIce, Arakon, Redline99) > Program Squirt With a Nand-x

Pages: 1

« previous next »

Author

Topic: Program Squirt With a Nand-x (Read 1595 times)

userx87

Newbie

Posts: 1

Program Squirt With a Nand-x

« on: July 11, 2012, 05:36:49 AM »

Hello Guys

I can program the squirt bga 1.2 with a nand-x ?


	Logged

letsmod

Member

Posts: 17

Re: Program Squirt With a Nand-x

« Reply #1 on: July 11, 2012, 04:17:24 PM »

yes you can with a little soldering


	Logged

nknave

Master Hacker

Posts: 144

Re: Program Squirt With a Nand-x

« Reply #2 on: July 16, 2012, 02:48:25 AM »

and don't forget to convert the .svf to .xsvf in order to be able to flash it using NandPro3.0a


	Logged

moses_373

Newbie

Posts: 2

Re: Program Squirt With a Nand-x

« Reply #3 on: July 27, 2012, 09:25:36 AM »

Hi guys, I'm attempting this same thing. Should I use the pads on the bottom of the squirt chip or the lpt pads on the top? Also, does it matter if I'm using J-runner or autogg? Perhaps I should just man up and start useing the nandpro command line.