Is RGH 2.0 possible with CMOD/Ebay Coolrunners?

[ddsdavey]

Im surprised at the lack of previous requests for such advice so im assuming i cannot but its worth a punt,is RGH 2.0 possible with CMOD/Ebay Coolrunners? Im assuming 3.0 requires an upgrade but i wondered if anyone had any luck using the original Coolrunners with RGH 2.0.Ive heard its possible and only requires a 1nf on cpurst-GND but would prefer confirmation from someone more experienced if available.

[RnRdude]

I don't know but the x360 glitch does work with RGH2 I have tested it myself and the x360glitch is even cheaper then cpld boards.

[ddsdavey]

Arguably the "x360glitch" is made just to glitch so i would not be surprised that yours works on 2.0 as does all RGH specific "pre built" boards,im really asking about the original dev boards,the "C-MOD" or Ebay replicas where you build up the board with components,diodes,1k resistor etc.
Does anyone know if anything extra is needed for using "diy" cpld's on 2.0? Or just the addition of a 1nf on CPU_rst?

[glaze83]

You build it the same as rgh1 , you just remove the 1nf cap in the rc circuit with the 3 diodes.

You then setup the power configuration for a phat.

[ddsdavey]

Well ive tried all sorts using an original "ebay" coolrunner on rgh 2.0 with no luck what so ever!