Falcon wont Glitch after 14719 Update

[v00d00]

ATM Im on 13604 RGH - working and glitching 100%

After update to 14xxx freeboot:
My falcon freeze when trying too run any .xex
It only black screen when trying to boot Xell Reloaded...

This is same problem with any 14xxx Freeboot image I make.
I have tryid building nand with almost all the apps (XeBuild, 360 Multi Builder, etc)

I use the chip from X360Glitch - dont know if the problem is wiring after update to 14xxx?

[astralev]

I have same problem.
Falcon 14719  with RGH 2.0    Freeze to logo after boot or freeze to NXE  when scrooling to menue.
I test  matrix Glitcher,   Coolrunner TX,   10 ohm resistor, or parallel  3.3k+470pico, same freezing

Need help to solve freezing

[RnRdude]

rgh2.0 Falcon is not so stable unfortunately there are many reports with freezing issue's.

[groxack]

I did a falcon too, 3.3k resistor + 680 pf cap, and it's glitchin fine but it's suffering the same problem, although is not instantaneous, it takes about 15 min to freeze.   

[boflc]

every freezing issue i've seen has been fixed by routing and/or shielding the wire leading to cpurst differently.