Jtag & RGH together?

[lyzanxia]

Would you do me a favor? Could you try to run fusion on your rgh/jtag box? If it runs at your system, I am sure its my box.
Tried to build with cb_a_dev & smc_config from my running rgh1 nand, no go :s

[cory1492]

cb_a_dev? what is that?

Keep in mind "RGH2" requires dual CB (CB_A/CB_B), a different wiring method and less reliable glitch times - not RGH1 which is what you should be using on a JTAG.

there is simply no need of CB_A/CB_B on a machine that hasn't been updated to 14717+, there is only CB/CD/CE/CF/CG.

As for fusion, I imagine they watch this board and will answer you if they feel like. I've personally not tried it after spotting a few nasty problems in their beta and simply moved on, so all I can really say is my own stuff to use dev on jtag/glitch works perfectly with this console in both glitch and jtag modes.

[ZerOneX]

Cory, what did you use as a dual nand solution?

I have a xbox slim with triple boot with quad boot function using trident (original nand, xebuild 1.03 glitched nand, fusion 1.09 which gives the option of fusion itself and devkit)

But i want to test everything, I'm wondering if I should use cygnos2 revE + relay to turn on/off the glitch chip or try the DemoN solution considering that with this last option a relay will not be necessary... I do not want to try trident on PHAT because it is not meant to that!! I would like to avoid all those wires on my mobo, so a quick solder solder solution it will be far better for a perfect and clean installation..

What would you suggest?

[cory1492]

If you have a cygnos E and dig around on the cygnos forums a little you'll find some modified CPLD source I posted and other discussion on this subject; basically you can pull a lead off the USB LED to get the glitch chips to enable/disable that way - no relays needed. I can also say demon works well in this regard, though I've not tried any RGH2 things myself besides trinity.

[ZerOneX]

If you have a cygnos E and dig around on the cygnos forums a little you'll find some modified CPLD source I posted and other discussion on this subject; basically you can pull a lead off the USB LED to get the glitch chips to enable/disable that way - no relays needed. I can also say demon works well in this regard, though I've not tried any RGH2 things myself besides trinity.

thank you, gonna look into that.

[lyzanxia]

I  finally gave in and updated my dash...goodbye jtag, but fusion now works..

[ZerOneX]

I  finally gave in and updated my dash...goodbye jtag, but fusion now works..

Are you saying that you were not able to run fusion on your dual solution having a jtagged xbox?