Hi, anyone can help me?
I updated my progskeet v1.1 with the latest bitstream file 111126.
After that my progstream can't be detected by computer anymore.
Seems that the progskeet with latest bitstream will lose its USB when it was connected to PS3.
Its USB works fine if it gets the power from computer side.
Anyone knows what is happening?
And anyone has progskeet's old bitstreams, I would like to program my progskeet back to the old version for getting its USB back to work when power is supplied by PS3. NOR Dump and erase looks working fine but the NOR writing does not work, so I would like to have a try to see any luck on the previous versions.
[ ] R7 Open
[ ] R7 Closed
[X] R7 Switch Installed
[ ] R8 Shorted by 0-Ohm Resistor (Stock)
[ ] R8 Shorted
 R8 Switch Installed
[ ] NAND
Length of Wires: Roughly 15cm
NAND/NOR Model: Spansion S29GL128P90TFIR2
Description of Task: Attempting to write the NOR chip of a Sony Playstion 3 slim console after the Progskeet updated.
Description of Methodology: Updated the Progskeet with bitstream 111126 and attempted to flash back resulting image.
Problem: Progskeet cannot be detected by computer on USB after updated with power supplied from PS3 and NOR writing error.