Matrix Trident vcc to X360Glitch

[sliddon]

just thought ill ask this here before i add some ugly switch to my X360Glitch  

im using a X360Glitch with slim and have great boot times 5-15secs i then fitted a trident witch uses the 3.3v for dual nand next to the nand quick solder it also has 2 points to connect pin7 3.3v to trident then to X360Glitch to disable 3.3v...

my problem has been that no matter what wire i use or location the X360Glitch takes 5mins to glitch when X360Glitch vcc is connected to trident my X360Glitch does read 3.3v ok but it must not be stable so is there anything i can do?

[nknave]

look for an alternate 3.3v and see if that solves your issue. I'm not sure if this is a solution, but It's something I'd try.

[sliddon]

i have already tried that 
i also tried different wire gauge lenth and loctation nothing changed seems that my trident is just unable to supply a stable 3.3v