boot xell but not boot dashbord

[poyeshsoft]

Hello
 I have a Jasper 16 mb.
 xell without a problem comes up within 5 seconds.
 Beginning with 360-Multi-Builder-v0.7
 freeboot made​​. With 14 699 dashboard update.
 Boot time was 20 seconds.
 The device was not a problem.
 J-Runner v01 freeboot files made ​​with the program.
 14 699 with the same version.
 Unfortunately the device did not come up at all.
 But with the eject button xell comes up.
 I did not put up the previous file.
 
Generally Glitcher out and I put my original Nand.
 Again, not a boot device.

 Does not give any error.
 Only green light is flashing.

 Do you have a solution?

[Tony_Amigozs]

resolder the cpu rst wire or put an 68nf or 100nf capacitor between cpu rst wire and the glitch chip.

[Arakon]

If Xell works, the glitch itself is working. Either the LDV is wrong, or the image is built incorrectly.