XboxHacker BBS
 
*
Welcome, Guest. Please login or register.
Did you miss your activation email?
July 28, 2014, 11:23:35 AM


Login with username, password and session length


Pages: 1
  Print  
Author Topic: Jasper256 Jtag Turns On/off By Itself, After 14717 Update  (Read 1062 times)
Spegs21
Newbie
*
Posts: 6


View Profile
« on: March 05, 2012, 01:15:55 AM »

Like the description says it turns on and off by itself. Usually if it does it when turned on it will reset itself (sometimes cycling on and off a few times). There doesn't seem to be any pattern of when it happens. Started after updating to 14717 with 360 Multi Builder v0.80, continued with v0.81, and v0.82. Tried J-Runner 14719, still does it. Went back to 14699 with J-Runner, still does it. All flashed with raw flash v4.

This console has been functioning flawlessly for a couple of years so I think wiring is not the problem. The console is a Jasper 256 with AUD_CLAMP and CB 6712 (orig nand).

I used dashlaunch to make a crashlog which contained the following:

Code:
------------------------------------------------------------------------
TIME: 12:00:04 GMT Tue, Nov 22, 2005
------------------------------------------------------------------------
Unhandled Exception (last chance):
The thread tried to read from or write to a virtual address for which
it does not have access.
------------------------------------------------------------------------
Faulting Module Info:
FullName       : \Device\Harddisk0\Partition1\plugins\swap.xex
BaseName       : swap.xex
PEName         : swap.dll
ImageBase      : 91F30000
SizeOfFullImage: 0001B000
EntryPoint     : 91F39548
------------------------------------------------------------------------
EADDR: 0x91F38FEC
ECODE: 0xC0000005
EFLAG: 0 (cont)
NPARM: 2
    PARAM 00: 0x00000000
    PARAM 01: 0x81BC86A4
CFLAG: 0x00000017
------------------------------------------------------------------------
Control Registers:
MSR: 0x00009030 IAR: 0x91F38FEC
LR : 0x91F38AA8 CTR: 0x0000000000000000
------------------------------------------------------------------------
Integer Registers:
CR : 0x48000022 XER: 0x20000000
r0 : 0x0000000000000000 r1 : 0x000000003A0C8650 r2 : 0x0000000000000000
r3 : 0x0000000000000A28 r4 : 0xFFFFFFFF91F388D8 r5 : 0xFFFFFFFF81BC8684
r6 : 0x0000000000000000 r7 : 0x0000000000000000 r8 : 0xFFFFFFFF80040000
r9 : 0xFFFFFFFF80040000 r10: 0x000000003A0C8440 r11: 0x0000000000000A32
r12: 0x0000000091F38A88 r13: 0x0000000080192000 r14: 0x0000000000000000
r15: 0x0000000000000000 r16: 0x0000000000000000 r17: 0x0000000000000000
r18: 0x0000000000000000 r19: 0x0000000000000000 r20: 0x0000000080065DE8
r21: 0x0000000000000000 r22: 0xFFFFFFFF91F0306C r23: 0xFFFFFFFF91F0309C
r24: 0xFFFFFFFF91F20000 r25: 0x0000000000000000 r26: 0x0000000000000000
r27: 0x0000000000000000 r28: 0x000000003A0BDD08 r29: 0x0000000000000001
r30: 0x0000000000000001 r31: 0x0000000000000001
------------------------------------------------------------------------
Call Stack:
0x91F38FEC (EADDR)
0x91F38AA8 (LR)
0x91F39488
0x8007A170
0x8007C884
0x8007C958
0x91F06AA4
0x91F07894
0x91F050A4
0x8169A3AC
0x8169BF5C
0x8169C0CC
0x80065E14
0x8007590C
------------------------------------------------------------------------
Dump Done
------------------------------------------------------------------------
------------------------------------------------------------------------
TIME: 12:00:04 GMT Tue, Nov 22, 2005
------------------------------------------------------------------------
Unhandled Exception (last chance):
The thread tried to read from or write to a virtual address for which
it does not have access.
------------------------------------------------------------------------
Faulting Module Info:
FullName       : \Device\Harddisk0\Partition1\plugins\swap.xex
BaseName       : swap.xex
PEName         : swap.dll
ImageBase      : 91F30000
SizeOfFullImage: 0001B000
EntryPoint     : 91F39548
------------------------------------------------------------------------
EADDR: 0x91F39000
ECODE: 0xC0000005
EFLAG: 0 (cont)
NPARM: 2
    PARAM 00: 0x00000000
    PARAM 01: 0x81BCAF4C
CFLAG: 0x00000017
------------------------------------------------------------------------
Control Registers:
MSR: 0x00009030 IAR: 0x91F39000
LR : 0x91F38AA8 CTR: 0x0000000000000000
------------------------------------------------------------------------
Integer Registers:
CR : 0x48000022 XER: 0x20000000
r0 : 0x0000000000000000 r1 : 0x000000003A0C8650 r2 : 0x0000000000000000
r3 : 0x0000000000000A28 r4 : 0xFFFFFFFF91F388D8 r5 : 0xFFFFFFFF81BC8684
r6 : 0x0000000000000000 r7 : 0x0000000000000000 r8 : 0xFFFFFFFF0DB388D8
r9 : 0xFFFFFFFF80040000 r10: 0x0000000084400000 r11: 0xFFFFFFFF81BCAF4C
r12: 0x0000000091F38A88 r13: 0x0000000080192000 r14: 0x0000000000000000
r15: 0x0000000000000000 r16: 0x0000000000000000 r17: 0x0000000000000000
r18: 0x0000000000000000 r19: 0x0000000000000000 r20: 0x0000000080065DE8
r21: 0x0000000000000000 r22: 0xFFFFFFFF91F0306C r23: 0xFFFFFFFF91F0309C
r24: 0xFFFFFFFF91F20000 r25: 0x0000000000000000 r26: 0x0000000000000000
r27: 0x0000000000000000 r28: 0x000000003A0BDD08 r29: 0x0000000000000001
r30: 0x0000000000000001 r31: 0x0000000000000001
------------------------------------------------------------------------
Call Stack:
0x91F39000 (EADDR)
0x91F38AA8 (LR)
0x91F39488
0x8007A170
0x8007C884
0x8007C958
0x91F06AA4
0x91F07894
0x91F050A4
0x8169A3AC
0x8169BF5C
0x8169C0CC
0x80065E14
0x8007590C
------------------------------------------------------------------------
Dump Done
------------------------------------------------------------------------
------------------------------------------------------------------------
TIME: 12:00:05 GMT Tue, Nov 22, 2005
------------------------------------------------------------------------
Unhandled Exception (last chance):
The thread tried to read from or write to a virtual address for which
it does not have access.
------------------------------------------------------------------------
Faulting Module Info:
FullName       : \Device\Harddisk0\Partition1\plugins\swap.xex
BaseName       : swap.xex
PEName         : swap.dll
ImageBase      : 91F30000
SizeOfFullImage: 0001B000
EntryPoint     : 91F39548
------------------------------------------------------------------------
EADDR: 0x91F39004
ECODE: 0xC0000005
EFLAG: 0 (cont)
NPARM: 2
    PARAM 00: 0x00000001
    PARAM 01: 0x81BCAF4C
CFLAG: 0x00000017
------------------------------------------------------------------------
Control Registers:
MSR: 0x00009030 IAR: 0x91F39004
LR : 0x91F38AA8 CTR: 0x0000000000000000
------------------------------------------------------------------------
Integer Registers:
CR : 0x48000022 XER: 0x20000000
r0 : 0x0000000000000000 r1 : 0x000000003A0C8650 r2 : 0x0000000000000000
r3 : 0x0000000000000A28 r4 : 0xFFFFFFFF91F388D8 r5 : 0xFFFFFFFF81BC8684
r6 : 0x0000000000000000 r7 : 0x0000000000000000 r8 : 0xFFFFFFFF0DB388D8
r9 : 0xFFFFFFFF80040000 r10: 0x0000000084400000 r11: 0xFFFFFFFF81BCAF4C
r12: 0x0000000091F38A88 r13: 0x0000000080192000 r14: 0x0000000000000000
r15: 0x0000000000000000 r16: 0x0000000000000000 r17: 0x0000000000000000
r18: 0x0000000000000000 r19: 0x0000000000000000 r20: 0x0000000080065DE8
r21: 0x0000000000000000 r22: 0xFFFFFFFF91F0306C r23: 0xFFFFFFFF91F0309C
r24: 0xFFFFFFFF91F20000 r25: 0x0000000000000000 r26: 0x0000000000000000
r27: 0x0000000000000000 r28: 0x000000003A0BDD08 r29: 0x0000000000000001
r30: 0x0000000000000001 r31: 0x0000000000000001
------------------------------------------------------------------------
Call Stack:
0x91F39004 (EADDR)
0x91F38AA8 (LR)
0x91F39488
0x8007A170
0x8007C884
0x8007C958
0x91F06AA4
0x91F07894
0x91F050A4
0x8169A3AC
0x8169BF5C
0x8169C0CC
0x80065E14
0x8007590C
------------------------------------------------------------------------
Dump Done
------------------------------------------------------------------------
------------------------------------------------------------------------
TIME: 12:00:05 GMT Tue, Nov 22, 2005
------------------------------------------------------------------------
Unhandled Exception (last chance):
The thread tried to read from or write to a virtual address for which
it does not have access.
------------------------------------------------------------------------
Faulting Module Info:
FullName       : \Device\Harddisk0\Partition1\plugins\swap.xex
BaseName       : swap.xex
PEName         : swap.dll
ImageBase      : 91F30000
SizeOfFullImage: 0001B000
EntryPoint     : 91F39548
------------------------------------------------------------------------
EADDR: 0x91F3900C
ECODE: 0xC0000005
EFLAG: 0 (cont)
NPARM: 2
    PARAM 00: 0x00000000
    PARAM 01: 0x81BCAF4C
CFLAG: 0x00000017
------------------------------------------------------------------------
Control Registers:
MSR: 0x00009030 IAR: 0x91F3900C
LR : 0x91F38AA8 CTR: 0x0000000000000000
------------------------------------------------------------------------
Integer Registers:
CR : 0x48000022 XER: 0x20000000
r0 : 0x0000000000000000 r1 : 0x000000003A0C8650 r2 : 0x0000000000000000
r3 : 0x0000000004440000 r4 : 0xFFFFFFFF91F388D8 r5 : 0xFFFFFFFF81BC8684
r6 : 0x0000000000000000 r7 : 0x0000000000000000 r8 : 0xFFFFFFFF0DB388D8
r9 : 0xFFFFFFFF80040000 r10: 0x0000000084400000 r11: 0xFFFFFFFF81BCAF4C
r12: 0x0000000091F38A88 r13: 0x0000000080192000 r14: 0x0000000000000000
r15: 0x0000000000000000 r16: 0x0000000000000000 r17: 0x0000000000000000
r18: 0x0000000000000000 r19: 0x0000000000000000 r20: 0x0000000080065DE8
r21: 0x0000000000000000 r22: 0xFFFFFFFF91F0306C r23: 0xFFFFFFFF91F0309C
r24: 0xFFFFFFFF91F20000 r25: 0x0000000000000000 r26: 0x0000000000000000
r27: 0x0000000000000000 r28: 0x000000003A0BDD08 r29: 0x0000000000000001
r30: 0x0000000000000001 r31: 0x0000000000000001
------------------------------------------------------------------------
Call Stack:
0x91F3900C (EADDR)
0x91F38AA8 (LR)
0x91F39488
0x8007A170
0x8007C884
0x8007C958
0x91F06AA4
0x91F07894
0x91F050A4
0x8169A3AC
0x8169BF5C
0x8169C0CC
0x80065E14
0x8007590C
------------------------------------------------------------------------
Dump Done
------------------------------------------------------------------------
------------------------------------------------------------------------
TIME: 12:00:55 GMT Tue, Nov 22, 2005
------------------------------------------------------------------------
Unhandled Exception (last chance):
Unknown reason C0000194.
------------------------------------------------------------------------
Title Module Info:
Title PE name  : dash.exe
Title Path     : \Device\Flash\dash.xex
------------------------------------------------------------------------
Faulting Module Info:
FullName       : xboxkrnl.exe
BaseName       : xboxkrnl.exe
ImageBase      : 80040000
SizeOfFullImage: 00190000
EntryPoint     : 00000000
------------------------------------------------------------------------
EADDR: 0x800868E8
ECODE: 0xC0000194
EFLAG: 1 (non-cont)
NPARM: 3
    PARAM 00: 0x00000000
    PARAM 01: 0x51CD4070
    PARAM 02: 0x30010020
CFLAG: 0x00000017
------------------------------------------------------------------------
Control Registers:
MSR: 0x00009030 IAR: 0x800868E8
LR : 0x800868E8 CTR: 0xFFFFFFFF800868D0
------------------------------------------------------------------------
Integer Registers:
CR : 0x24000042 XER: 0x20000000
r0 : 0xFFFFFFFFFFFFFFFF r1 : 0x000000007A05F9E0 r2 : 0x0000000020000000
r3 : 0x000000007A05EF80 r4 : 0x0000000000000000 r5 : 0x000000000000043C
r6 : 0xFFFFFFFF80169EE4 r7 : 0x0000000000000003 r8 : 0x0000000051CD4070

Doesn't appear to like swap.xex so I just got rid of it. This is unrelated to the main problem though. I'm not sure if the last dump has anything to do with it.

Is it possible that the ROL board has just gone bad?

EDIT: Been sitting here listening to it turn itself on and off about 3 times every minute and now it is sitting at the log in screen and all four of the red lights are on.
« Last Edit: March 05, 2012, 01:29:47 AM by Spegs21 » Logged
Gazcoigne
Xbox Hacker
*****
Posts: 1915


Suckin Diesel since 1983


View Profile
« Reply #1 on: March 05, 2012, 04:55:54 AM »

are you building the images with dashlaunch included?

have you tried building a clean image without dashlaunch to see if that helps?
Logged

Spegs21
Newbie
*
Posts: 6


View Profile
« Reply #2 on: March 05, 2012, 04:36:24 PM »

The first time I updated to 14717 with 360 Multi Builder I built the image without dash launch and it still did it. I will try a 14719 image with J-Runner w/o dash launch and see what it does.

I ended up taking the console apart to experiment with the ROL board. If I remove the board it will not turn on by itself. I tried connecting the board while the console is plugged in and most of the time it turns on instantly by itself. If the console is on and I remove the board it will not turn off by itself. I'm leaning toward an issue with the ROL board. I will try a different one and report my findings.

EDIT: Still does it w/o dash launch patches.
« Last Edit: March 06, 2012, 12:40:56 AM by Spegs21 » Logged
Spegs21
Newbie
*
Posts: 6


View Profile
« Reply #3 on: March 09, 2012, 12:14:03 AM »

Seems like it was the ROL board. Put a different one on and haven't had any issues. Glad it wasn't something more serious.
Logged
Viral Doom
Member
**
Posts: 17


View Profile
« Reply #4 on: April 12, 2012, 12:05:26 PM »

same happend to me with 3 diferents boards: jasper, falcon and trinity...

the solution: let the board unplugged for a week.. or a weekend.. this is cause by a discharge on a cap or coil

true story, happened to me Wink hehe
Logged
Pages: 1
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC

Valid XHTML 1.0! Valid CSS! Dilber MC Theme by HarzeM