Matrix glitcher v2 problems

[nirbeltran]

Hi all
I have intalled the new glitcher but i get some errors . On first intall it did not boot at all , so i tried the old trick and changed " A " wire to 50 cm , so now it boots but the boot rate is terrible - about one to three , and boot time is about one minute . i have being playing with the "A" length for some time but i get no satisfaing results .
The console is slim . And if i change to old matrix i get much much better results
Can any one help ?

[groxack]

well, isn't that chip programmable to have better boot times?   

[nirbeltran]

It should be but the programmer and the software are not out yet :-(

[Electon^-]

I've done a tutorial on Matrix Glitcher v2, and I've an enough good rate of glitch timings. It boot in 1-4 boot... Not often, it wil take 10 reboot before start the dash, but I've this situation also with Matrix 1 or Coolrunner by ngzhang...
I used an 25cm wire on A point...

[nirbeltran]

can you send a link to tutorial ?

[rz2k]

nirbeltran,
could you please post a hi res pic of matrix v2?
I'm interested what they did there and what is the name of chip in SSOP package, in other topic we've decided that it is a pl2303 USB-Serial.

[nirbeltran]

sorry
dont have a camera good enough for the job
could any one point me to matrix v2 tutorial ?

[quantex]

I've done a tutorial on Matrix Glitcher v2, and I've an enough good rate of glitch timings. It boot in 1-4 boot... Not often, it wil take 10 reboot before start the dash, but I've this situation also with Matrix 1 or Coolrunner by ngzhang...
I used an 25cm wire on A point...

Electron,

Could you send-me the tutorial?
I'm having some problems too.

Thanks