Home
Help
Search
Login
Register
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
June 20, 2013, 01:09:29 AM
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
XboxHacker BBS
>
Xbox 360
>
Tech Support 360
(Moderators:
SiliconIce
,
Arakon
,
Redline99
) >
Glitch hack problem
Pages:
1
« previous
next »
Print
Author
Topic: Glitch hack problem (Read 482 times)
Shad0wbreaker
Member
Posts: 14
Glitch hack problem
«
on:
December 29, 2011, 05:00:23 PM »
Hello
I've got a big problem. Long time ago, the dvd drive of my Xbox 360 got f***ed up. I don't know how it happend, but thats not my problem. I found the glitch hack 3 monthes ago, and i knew, with a jtag you can recover your DVD-Key. So i began to buy everything is needed. The Matrix Nand Flasher, the Coolrunner (I bought the one from x360glitch.com, very nice product. Cheap and you don't have to buy the diodes, resistors, etc.) I followed the guide on x360glitch.com, wired up everything. Dumped my Nand (got an error 204, but i read, it won't change anything (the dumping process didn't stop)). I got the ecc file from python and wrote it back on the nand of the Xbox. Now, my problem: The XBox doesn't Start! First the green light in the middle just blinked... then i realised i didn't plug in my DVD Drive. So i Pluged (?) it in (The sata Cable isn't connected, may this be the problem?). I didn't Blink anymore, no... it just lights my Angry Face with green light! I am so f***ing Mad! Someone's got a solution? I double check the Solderings now... And if it won't work i will kick that xboxes ass!
Sorry for my bad english
Shad0wbreaker
Logged
Shad0wbreaker
Member
Posts: 14
Re: Glitch hack problem
«
Reply #1 on:
December 29, 2011, 05:17:36 PM »
I resoldered the connections and now, i cant even start the xbox
WTF???
Logged
dc_away
Master Hacker
Posts: 133
Re: Glitch hack problem
«
Reply #2 on:
December 29, 2011, 08:24:15 PM »
no power is usually a broken trace @ the hana clk line (on the 360 board), or a blown component on that line. i believe the resistor is 33ohm. maybe check that resistor first, then if it it good check the trace for damage, and make sure all the other solder joints are good.
Logged
Shad0wbreaker
Member
Posts: 14
Re: Glitch hack problem
«
Reply #3 on:
December 30, 2011, 04:00:02 AM »
Jeah thanks i saw it this morning, the trace is broken. I'm gonna try to fix it. There is a good tutorial in this forum.
thx Shad0wbreaker
Logged
Shad0wbreaker
Member
Posts: 14
Re: Glitch hack problem
«
Reply #4 on:
December 30, 2011, 04:39:45 PM »
Ok, i fixed the CLK line following that guide (
http://www.xboxhacker.org/index.php?topic=17051.msg127522;topicseen#msg127522
). all Connections are soldered good, not perfect, but at least as good as in the guide. The Xbox still doesn't boot... I'll upload some fotos soon (have to recharge the Accu
)
Shad0w
Logged
Pages:
1
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Important Links and Threads
=> General Discussion (non-Xbox)
=> XboxHacker Site Discussion
=> Junkyard/Sewer/Dumpster/Landfill
-----------------------------
Xbox1 (original)
-----------------------------
=> Xbox1 General
=> Xbox1 Support
-----------------------------
Xbox 360
-----------------------------
=> Xbox 360 General Discussion
=> Tech Support 360
=> XboxHacking - General
=> Xbox 360 "Modding"
-----------------------------
Research & Technical XboxHacking (Xbox 360)
-----------------------------
=> DVD-ROM Drive and Media
=> Hard Disk
=> Software (TECHNICAL)
=> Kinect (TECHNICAL)
-----------------------------
Other Systems
-----------------------------
=> Playstation 3
Loading...