XboxHacker BBS
 
Home Help Search Login Register
*
Welcome, Guest. Please login or register.
Did you miss your activation email? 		May 18, 2013, 06:59:47 AM


Login with username, password and session length


XboxHacker BBS > Xbox 360 > Tech Support 360 (Moderators: SiliconIce, Arakon, Redline99) > Unable to program Matrix Glitcher - Need help for cable setup
Pages: 1
« previous next »
  Print  
Author Topic: Unable to program Matrix Glitcher - Need help for cable setup  (Read 2648 times)
heartshacker
Member
**
Posts: 18


View Profile
« on: December 16, 2011, 02:08:02 PM »
I am trying to RGH my Jasper 512MB. I am able to dump NAND. But facing issue while program the Matrix Glitcher. It's not been detected bu Impact.


To power the chip, I have tried Computer PSU(http://pinouts.ru/Power/atx_v2_pinout.shtml). For the PSU, I have used PIN1 for 3.3V and Pin 3 for ground. But it did not work. Also tried 2 AA batteries. Each AA batteries provides 1.5V. so used 2 batteries. But also no luck.

As per the tutorial, "J2C1. 8 point of the motherboard" provides 3.3V. But unable to find the section. Someone said it is just beside AVPort. But not finding it. If you can post the exact location, it will be helpful.

Seems the issue is with LPT cable. Uploading few picture of the cable.

http://img834.imageshack.us/img834/884/dscn2094q.jpg
http://img17.imageshack.us/img17/4572/dscn2095du.jpg
http://img585.imageshack.us/img585/9550/dscn2096m.jpg
http://img808.imageshack.us/img808/1807/dscn2097c.jpg
http://img851.imageshack.us/img851/3009/dscn2098w.jpg

Kindly suggest if the the cable setup is ok?
Logged
jackinthexbox
Master Hacker
****
Posts: 181


Xbox.ee


View Profile WWW
« Reply #1 on: December 16, 2011, 04:46:16 PM »
Dont you have to short something on the matrix chip to programm it?
I had x360glitch chip and had to short a point next to diodes.
Logged
phonsey
Master Hacker
****
Posts: 428



View Profile
« Reply #2 on: December 16, 2011, 04:52:01 PM »
Quote from: heartshacker on December 16, 2011, 02:08:02 PM
I am trying to RGH my Jasper 512MB. I am able to dump NAND. But facing issue while program the Matrix Glitcher. It's not been detected bu Impact.


To power the chip, I have tried Computer PSU(http://pinouts.ru/Power/atx_v2_pinout.shtml). For the PSU, I have used PIN1 for 3.3V and Pin 3 for ground. But it did not work. Also tried 2 AA batteries. Each AA batteries provides 1.5V. so used 2 batteries. But also no luck.

As per the tutorial, "J2C1. 8 point of the motherboard" provides 3.3V. But unable to find the section. Someone said it is just beside AVPort. But not finding it. If you can post the exact location, it will be helpful.

Seems the issue is with LPT cable. Uploading few picture of the cable.

http://img834.imageshack.us/img834/884/dscn2094q.jpg
http://img17.imageshack.us/img17/4572/dscn2095du.jpg
http://img585.imageshack.us/img585/9550/dscn2096m.jpg
http://img808.imageshack.us/img808/1807/dscn2097c.jpg
http://img851.imageshack.us/img851/3009/dscn2098w.jpg

Kindly suggest if the the cable setup is ok?

make this cable instead m8 its simple and easier to make and works 100% Cheesy



u can use 3.3v from xbox instead of batterys m8  Cool
Logged
phonsey
Master Hacker
****
Posts: 428



View Profile
« Reply #3 on: December 16, 2011, 04:53:13 PM »
Quote from: phonsey on December 16, 2011, 04:52:01 PM
Quote from: heartshacker on December 16, 2011, 02:08:02 PM
I am trying to RGH my Jasper 512MB. I am able to dump NAND. But facing issue while program the Matrix Glitcher. It's not been detected bu Impact.


To power the chip, I have tried Computer PSU(http://pinouts.ru/Power/atx_v2_pinout.shtml). For the PSU, I have used PIN1 for 3.3V and Pin 3 for ground. But it did not work. Also tried 2 AA batteries. Each AA batteries provides 1.5V. so used 2 batteries. But also no luck.

As per the tutorial, "J2C1. 8 point of the motherboard" provides 3.3V. But unable to find the section. Someone said it is just beside AVPort. But not finding it. If you can post the exact location, it will be helpful.

Seems the issue is with LPT cable. Uploading few picture of the cable.

http://img834.imageshack.us/img834/884/dscn2094q.jpg
http://img17.imageshack.us/img17/4572/dscn2095du.jpg
http://img585.imageshack.us/img585/9550/dscn2096m.jpg
http://img808.imageshack.us/img808/1807/dscn2097c.jpg
http://img851.imageshack.us/img851/3009/dscn2098w.jpg

Kindly suggest if the the cable setup is ok?

make this cable instead m8 its simple and easier to make and works 100% Cheesy



fyi u can use 3.3v from xbox instead of batterys too Cool
Logged
jeppee
Member
**
Posts: 10


View Profile
« Reply #4 on: December 17, 2011, 02:14:48 PM »
Just do it like shown in the picture above. Works very well even with batteries. I used wires like ~ 15cm just to make sure.
Logged
heartshacker
Member
**
Posts: 18


View Profile
« Reply #5 on: December 18, 2011, 12:37:51 AM »
I am having 3.3K register. If I use this instead of 4.7K, will it work?
Logged
heartshacker
Member
**
Posts: 18


View Profile
« Reply #6 on: December 18, 2011, 11:48:41 AM »
Got 4.7K register. Did all the connection. Using XLINK to program it. But getting following error

"There are many unknown devices being detected. Press Yes to continue or press No to stop."

-----------------------------------------

Welcome to iMPACT
iMPACT Version: 12.2
Project: C:\Xilinx\12.2\LabTools\\auto_project.ipf created.
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
GUI --- Auto connect to cable...
// *** BATCH CMD : setCable -port auto
AutoDetecting cable. Please wait.
PROGRESS_START - Starting Operation.
Connecting to cable (Usb Port - USB21).
Checking cable driver.
 Source driver files not found.
The Platform Cable USB is not detected. Please connect a cable.If a cable is connected, please disconnect
and reconnect to the usb port, follow the instructions in the 'Found New Hardware Wizard', then retry
the Cable Setup operation.
Cable connection failed.
Connecting to cable (Parallel Port - LPT1).
Checking cable driver.
 Driver windrvr6.sys version = 8.1.1.0. WinDriver v8.11 Jungo (c) 1997 - 2006 Build Date: Oct 16 2006 X86 32bit SYS 12:35:07, version = 811.
Cable connection failed.
Connecting to cable (Parallel Port - LPT2).
Checking cable driver.
 Driver windrvr6.sys version = 8.1.1.0. WinDriver v8.11 Jungo (c) 1997 - 2006 Build Date: Oct 16 2006 X86 32bit SYS 12:35:07, version = 811.
Cable connection failed.
Connecting to cable (Parallel Port - LPT3).
Checking cable driver.
 Driver windrvr6.sys version = 8.1.1.0. WinDriver v8.11 Jungo (c) 1997 - 2006 Build Date: Oct 16 2006 X86 32bit SYS 12:35:07, version = 811.
 LPT base address = 0378h.
 ECP base address = FFFFFFFFh.
Cable connection established.
PROGRESS_END - End Operation.
Elapsed time =      1 sec.
Attempting to identify devices in the boundary-scan chain configuration...
INFO:iMPACT - Current time: Sun Dec 18 22:15:38 2011
// *** BATCH CMD : Identify -inferir
PROGRESS_START - Starting Operation.
Identifying chain contents...'0': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'1': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'2': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'3': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'4': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'5': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'6': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'7': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'8': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'9': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'10': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'11': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'12': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'13': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'14': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'15': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'16': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'17': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'18': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'19': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'20': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'21': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'22': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'23': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'24': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'25': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'26': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'27': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'28': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'29': : Manufacturer's ID = Unknown
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
INFO:iMPACT - iMPACT quit the Identify Chain because it detects there are
at least 30 'UNKNOWN' type devices on the chain.
Please check the hardware settings and retry!
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
PROGRESS_END - End Operation.
Elapsed time =      8 sec.


Any suggestion will be helpful.
Logged
heartshacker
Member
**
Posts: 18


View Profile
« Reply #7 on: December 18, 2011, 12:04:08 PM »
Also getting following error

Welcome to iMPACT
iMPACT Version: 12.2
Project: C:\Xilinx\12.2\LabTools\\auto_project.ipf created.
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
GUI --- Auto connect to cable...
// *** BATCH CMD : setCable -port auto
AutoDetecting cable. Please wait.
PROGRESS_START - Starting Operation.
Connecting to cable (Usb Port - USB21).
Checking cable driver.
 Source driver files not found.
The Platform Cable USB is not detected. Please connect a cable.If a cable is connected, please disconnect
and reconnect to the usb port, follow the instructions in the 'Found New Hardware Wizard', then retry
the Cable Setup operation.
Cable connection failed.
Connecting to cable (Parallel Port - LPT1).
Checking cable driver.
 Driver windrvr6.sys version = 8.1.1.0. WinDriver v8.11 Jungo (c) 1997 - 2006 Build Date: Oct 16 2006 X86 32bit SYS 12:35:07, version = 811.
Cable connection failed.
Connecting to cable (Parallel Port - LPT2).
Checking cable driver.
 Driver windrvr6.sys version = 8.1.1.0. WinDriver v8.11 Jungo (c) 1997 - 2006 Build Date: Oct 16 2006 X86 32bit SYS 12:35:07, version = 811.
Cable connection failed.
Connecting to cable (Parallel Port - LPT3).
Checking cable driver.
 Driver windrvr6.sys version = 8.1.1.0. WinDriver v8.11 Jungo (c) 1997 - 2006 Build Date: Oct 16 2006 X86 32bit SYS 12:35:07, version = 811.
 LPT base address = 0378h.
 ECP base address = FFFFFFFFh.
Cable connection established.
PROGRESS_END - End Operation.
Elapsed time =      1 sec.
Attempting to identify devices in the boundary-scan chain configuration...
INFO:iMPACT - Current time: Sun Dec 18 22:33:09 2011
// *** BATCH CMD : Identify -inferir
PROGRESS_START - Starting Operation.
Identifying chain contents...done.
ERROR:iMPACT - A problem may exist in the hardware configuration. Check that the cable, scan chain, and power connections are intact, that the specified scan chain configuration matches the actual hardware, and that the power supply is adequate and delivering the correct voltage.
PROGRESS_END - End Operation.
Elapsed time =      0 sec.
// *** BATCH CMD : identifyMPM
Logged
heartshacker
Member
**
Posts: 18


View Profile
« Reply #8 on: December 19, 2011, 11:21:05 AM »
Any help will be appreciated..
Logged
jeppee
Member
**
Posts: 10


View Profile
« Reply #9 on: December 19, 2011, 03:20:49 PM »
Looks weird.. Have you done the cable setup properly in impact (port and frequency at least) and are you sure the cable itself is fine?




Check it out if you can find any results with google.
Logged
Gazcoigne
Xbox Hacker
*****
Posts: 1909


Suckin Diesel since 1983


View Profile
« Reply #10 on: December 19, 2011, 07:03:13 PM »
i got a batch of the matrix glitchers in and they were all duds

apparently there is a large batch of duds floating around at mo.
Logged
heartshacker
Member
**
Posts: 18


View Profile
« Reply #11 on: December 20, 2011, 08:22:46 PM »
Quote from: jeppee on December 19, 2011, 03:20:49 PM
Looks weird.. Have you done the cable setup properly in impact (port and frequency at least) and are you sure the cable itself is fine?




Check it out if you can find any results with google.

I have checked cable setup. Impact is detecting cable.

Impact Cable setup



Uploaded with ImageShack.us

Impact Cable configuration



Uploaded with ImageShack.us

My Cable setup image

http://img857.imageshack.us/img857/2889/copyofdscn2108.jpg
http://img269.imageshack.us/img269/8638/copyofdscn2103.jpg
http://img835.imageshack.us/img835/1148/copyofdscn2106.jpg

For power source I have used PC SMPS (http://pinouts.ru/Power/atx_v2_pinout.shtml ). For 3.3V used Pin 1 and For Ground PIN 3. Also tried 2 AA batteries.
« Last Edit: December 20, 2011, 08:31:47 PM by heartshacker » Logged
oveis
Member
**
Posts: 45


View Profile
« Reply #12 on: December 21, 2011, 12:38:28 AM »
I had this problem exactly like you . what i did ?
1 : cut the power voltage for powering cpld to 3cm
2 : cut the home made jtag cabel lower than 5 cm
3 : change parallel settings in bios
Logged
heartshacker
Member
**
Posts: 18


View Profile
« Reply #13 on: December 25, 2011, 12:26:08 PM »
My power voltage length is 3CM and home made jtag cable is 5 CM. Still no luck. Tried with different parallel settings in bios (ECC/EPP). But still no luck. Can u please explain exactly what settings you used in bios.
Logged
RocketMza
Newbie
*
Posts: 1


View Profile
« Reply #14 on: August 08, 2012, 02:10:44 PM »
First control de voltage of pin 13 of LPT if it is 4.7 v or 5v , use this scheme

If the volt in pin 13 is 3.3v dont use de 4.7K
configured in the bios to lpt1-EPP (0x378)
To program de chip use 360gcProg v1.6
http://www.xbox-scene.com/xbox1data/sep/EFukpVuluFQukDHMOI.php
First power de chip and second conect to lpt. Thats all
LPT Easy programmer
« Last Edit: August 08, 2012, 04:45:55 PM by RocketMza » Logged
Pages: 1
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC

Valid XHTML 1.0! Valid CSS! Dilber MC Theme by HarzeM