Author Topic: How to make a usb nand X update cable  (Read 2656 times)

Acton1

  • Member
  • **
  • Posts: 32
    • View Profile
How to make a usb nand X update cable
« on: November 23, 2011, 05:22:40 PM »
If anyone here know's on how to make one plz could you post a diagram on how to make

neonpolaris

  • Xbox Hacker
  • *****
  • Posts: 1051
    • View Profile
Re: How to make a usb nand X update cable
« Reply #1 on: November 23, 2011, 06:10:21 PM »
The pinouts are on TX's forums.

Acton1

  • Member
  • **
  • Posts: 32
    • View Profile
Re: How to make a usb nand X update cable
« Reply #2 on: November 23, 2011, 07:09:16 PM »
I need more info mate on what the wiring diagram is

The USB Pinout are

+5 VDC
Data -
Data +
Ground

so how would i connect to serial isp

phonsey

  • Master Hacker
  • ****
  • Posts: 428
    • View Profile

ddxcb

  • Xbox Hacker
  • *****
  • Posts: 616
  • meh, who buys or own ""JTAGS""
    • View Profile
Re: How to make a usb nand X update cable
« Reply #4 on: November 24, 2011, 01:14:32 AM »
just buy the cable m8 its cheap :D

http://www.ck3.co.uk/product.php?productid=252&cat=0&page=

Thats for the CK3 to update Nand-X, which people dont want to spend to buy that.

11/30/11 TX will release a Usb cable to update Nand-X for $12-16.
I'm a ADD modder, got to mod or be bored xD

janvkem

  • Hacker
  • ***
  • Posts: 61
    • View Profile
Re: How to make a usb nand X update cable
« Reply #5 on: November 24, 2011, 03:32:51 AM »
It is probably usb to serial. Just buy a usb to serial with 5 v output and update the thing yourself. Pinout it easy, you just need to connect ground tx and rx. Then power the device and let flashmagic do the rest. If you can handle the xbox nand you should definitely be able to update the nand-x without buying a cable. The ck3 is only used for its usb to serial port.

Acton1

  • Member
  • **
  • Posts: 32
    • View Profile
Re: How to make a usb nand X update cable
« Reply #6 on: November 24, 2011, 05:54:14 AM »
i would like to make one like this that i found on modtraders website

But it's still out of stock till the 30th of nov then i have to wait  for the post



I have a spare usb cable and a female connector for the nand x end so i can use it to update my nand x just need the wiring diagram
« Last Edit: November 24, 2011, 05:57:06 AM by Acton1 »

neonpolaris

  • Xbox Hacker
  • *****
  • Posts: 1051
    • View Profile
Re: How to make a usb nand X update cable
« Reply #7 on: November 24, 2011, 10:07:09 AM »
You don't just wire the USB cable to the nand-x, it needs a USB to serial adapter. The schematic will depend on which adapter chip you use. As for the serial pinout on the nand-x, that's at TX forums.

Btw, is it 5 or 3.3v signal level?
« Last Edit: November 24, 2011, 10:15:25 AM by neonpolaris »