|
morenomdz
|
 |
« Reply #240 on: August 06, 2011, 06:05:36 PM » |
|
you have to turn to one side and the other, I used a soldering iron 30w, after heated through, all 20 were 100% flawless!
Fenixgames, I challenge you cannot make a video showing you doing the process. I'll be happy if it does indeed works but for me it sounds like not true. |
|
|
|
|
Logged
|
|
|
|
|
hossam99
|
|
« Reply #241 on: August 06, 2011, 06:34:26 PM » |
|
Hi, all I have problem with 0225 http://imageshack.us/photo/my-images/823/ledmx.jpg/please anyone help me I cant dump key from JF & I cant use unlockSPI I use via chipset 6421 & now I know cant use via chipset 6421 with 0225 now I want to ask if I get Xecuter 360 USB Pro I can dump key from JF & use unlockSPI or cant u r on win 7, have u disabled driver signature by pressing F8 on windows boot? btw which version of JF used? try 1.86 yes I'm in win 7 , I dont tutch it driver signature , I'm use JF 1.86 & I'm in old flashed slim 9504 & phat lite-on |
|
|
|
|
Logged
|
|
|
|
Drag0nmaster
Newbie
Posts: 1
|
|
« Reply #242 on: August 06, 2011, 07:03:03 PM » |
|
Unlocked my 0225 Winbond 1040 chip with a simple Needle on 3,3V (100ohm). It took more Time, but it feels more safer. Pics:   |
|
|
|
|
Logged
|
|
|
|
|
nice69
|
|
« Reply #243 on: August 06, 2011, 07:11:48 PM » |
|
I'm no camera is simple to use soldering iron to make the hole, and need not be connected to 3.3 volts, this will prevent damage !!
he will not provide a picture, simply because he can't. you cannot melt the chip using soldering iron. but i have 200W soldering iron that can melt your tongue for good. am i right VICTOR. you are the same person who makes cursosgames FAKE videos. |
|
|
|
|
Logged
|
|
|
|
|
|
|
leorimolo
|
|
« Reply #245 on: August 06, 2011, 07:35:13 PM » |
|
f*** yeah just unlocked a 0225 using an exacto knife, after I did the whole thing I noticed it wasnt on 13xxx dashboard >_<
|
|
|
|
|
Logged
|
|
|
|
|
HKFenixgamesDD
|
|
« Reply #246 on: August 06, 2011, 07:50:55 PM » |
|
Is not fake, I'm without my camera at the time, repeat the procedure I'm doing, soldering iron of 30W, the exact point in March put the welder on the spot and spin it, the unlocked within seconds, do not say it's fake no without proper procedure. so I'm with my camera with photos and videos prove, q ue believe before that someone will have done the correct procedure.
|
|
|
|
|
Logged
|
|
|
|
|
nice69
|
|
« Reply #247 on: August 07, 2011, 01:57:27 AM » |
|
Is not fake, I'm without my camera at the time, repeat the procedure I'm doing, soldering iron of 30W, the exact point in March put the welder on the spot and spin it, the unlocked within seconds, do not say it's fake no without proper procedure. so I'm with my camera with photos and videos prove, q ue believe before that someone will have done the correct procedure.
it is fake, the chip will give "false-unlock" at 100°C as soon as it cools down, it will get relocked. and obviously you don't even know what you are saying. |
|
|
|
|
Logged
|
|
|
|
|
raidenxtribe
|
|
« Reply #248 on: August 07, 2011, 04:19:30 AM » |
|
Fenix are you searching for glory ? Try with a glory hole, it's more suited for people like you !  |
|
|
|
|
Logged
|
|
|
|
|
cory1492
|
|
« Reply #249 on: August 07, 2011, 05:24:07 AM » |
|
Erm, he's not full of it... This took less than 1 min to achieve, most of the time was spent waiting for the little light to say the iron was hot (and I slipped of the corner of the H and melted the breadboard a little...)   The main ingredient in the case of black IC is epoxy resin (it's not "real" bakelite, like old cue balls)... it's a bit more compact, has a few more ingredients and thus a bit harder to remove on an IC case, but it's still very similar to the other epoxies. I have kept a 25W soldering iron around for years, with a really odd/sharp tip, strictly for shaving epoxy off contacts (when heated epoxy becomes crystal/brittle, and in most cases a heat gun is overkill.) It works perfectly for those little blobs where the die is bonded directly to the circuit board instead of encased in resin before mounting, for getting at single solder points under chips that have epoxy surround like some xbox drives, and as you see I just tested on a random PIC IC casing... with a needle point at 640F solder station the black material is extremely easy to penetrate/shave and I could probably bare a good number of the leg/bondwires in it rather quickly and without damage... in fact I have done so i the past to repair broken legs on a similar casing. Kinda surprised this method wasn't made popular by the Wii drive modders. Also seems to me it would give a much better tactile sensation than a dremel that vibrates your hand to sleep. I definitely don't recommend putting 3.3V to your soldering iron, or doing this with your iron while the machine/drive is powered - most irons are grounded for static dissipation. BTW: once you sever the wire from grounding to the pin it's basically an open collector, even just having your finger close to the bond wire (or a Q tip or anything else really), or sometimes just touching some random place near the ground plane can be enough to cause an open collector to go weak high. |
|
|
|
« Last Edit: August 07, 2011, 10:28:10 AM by cory1492 »
|
Logged
|
|
|
|
|
DARKFiB3R
|
|
« Reply #250 on: August 07, 2011, 06:15:59 AM » |
|
Fenix are you searching for glory ? Try with a glory hole, it's more suited for people like you !
Dude, get rid of that f***ing picture, it's turning my stomach  Looks like you all owe HKFenixgamesDD an apology too, jumping on the hate bandwagon for no good reason. Had a little practice on a dead hdd...  |
|
|
|
« Last Edit: August 07, 2011, 11:04:37 AM by DARKFiB3R »
|
Logged
|
|
|
|
|
HKFenixgamesDD
|
|
« Reply #251 on: August 07, 2011, 09:11:25 AM » |
|
More 5 Winbond, perfect, I would not waste my time telling lies and putting up with insults, photos soon!
|
|
|
|
|
Logged
|
|
|
|
|
Pacote-san
|
|
« Reply #252 on: August 07, 2011, 09:38:02 AM » |
|
More 5 Winbond, perfect, I would not waste my time telling lies and putting up with insults, photos soon!
Just saw your MP will try with the iron asap |
|
|
|
|
Logged
|
|
|
|
|
|
|
Pacote-san
|
|
« Reply #254 on: August 07, 2011, 09:54:19 AM » |
|
No 3.3v is required Lots and lots of people here in Brazil doing only with dremel without the 3.3v line Just did the test Set the iron on the max temp and this is the result of less then 2 min, very precise, will try on a virgin board later  |
|
|
|
|
Logged
|
|
|
|
|
mordock
|
|
« Reply #255 on: August 07, 2011, 10:03:21 AM » |
|
More 5 Winbond, perfect, I would not waste my time telling lies and putting up with insults, photos soon!
i never said you where lying, im happy it works  , i dont usualy repress people just because they are caliming they achieved something, im happy it worked and we all can gain something from your experience can you please post a video of you doing one? |
|
|
|
|
Logged
|
|
|
|
|
miragui
|
|
« Reply #256 on: August 07, 2011, 10:05:28 AM » |
|
More 5 Winbond, perfect, I would not waste my time telling lies and putting up with insults, photos soon!
One question HKFenixgamesDD how fast do you reach the bonding wire with the soldering iron? I want to try your method but I don't want to push the iron to hard |
|
|
|
|
Logged
|
|
|
|
|
mordock
|
|
« Reply #257 on: August 07, 2011, 10:09:19 AM » |
|
just to clarify something after the hole is done we still have to do the sputnik 360 method right?
|
|
|
|
|
Logged
|
|
|
|
takahara
Newbie
Posts: 6
|
|
« Reply #258 on: August 07, 2011, 10:14:59 AM » |
|
just to clarify something after the hole is done we still have to do the sputnik 360 method right?
No sputnik360 is only for MX SPI and the drilling is for Winbond please read before posting |
|
|
|
|
Logged
|
|
|
|
|
mordock
|
|
« Reply #259 on: August 07, 2011, 10:18:05 AM » |
|
just to clarify something after the hole is done we still have to do the sputnik 360 method right?
No sputnik360 is only for MX SPI and the drilling is for Winbond please read before posting I know but the drive doesnt get in vendor mode after you make the hole right? to get it in vendor mode we still have to do the cut the trace etc like the sputnik 360 ? |
|
|
|
|
Logged
|
|
|
|
|
