Blown240sx
Newbie
Posts: 6
|
 |
« Reply #180 on: August 04, 2011, 10:55:57 PM » |
|
Did a little research and it seems that most of the chips are coated in the same plastic as a billiards ball is made of.
Found that sulfuric acid will dissolve this. (Dangerous)
I may run down to the local auto parts store and see if they still carry battery acid aka sulfuric acid on the shelf.
If they do I have an old xbox 360 mother board. Ill try dissolving a chip on it. I dont know what effects that might have on the internal chip if any but if it works it would be an alternative to drilling it and may make it possible to soilder to those traces to make it easy to unlock and lock in the future. Reason being that Microsoft may be able to detect if the chip is still locked.
Thats why you relock the chip after flashing. I understand that but whos to say after so many times of hitting it with a drill bit or hoping a high voltage spark from a lighter wont do enough damage that you cant unlock it again. I know FW updates dont come to terribly often but it seems to me that MS is trying a lot lately to shut this type of mod down. Weve had 3 different firmware updates (1 coming soon for 1.91) and a 4th on the way end of this year LT+2.0. Why not have a more controllable option. Plus if it works it will be cheaper than going and buying a drimmel tool. |
|
|
|
|
Logged
|
|
|
|
|
glaze83
|
|
« Reply #181 on: August 04, 2011, 11:00:44 PM » |
|
If you missed it I found that the static from a cue tip cause it to unlock after its been drilled as well. Dipping it in isopropyl alcohol seems to make it that much more effective
|
|
|
|
|
Logged
|
|
|
|
xstationbr2
Member
Posts: 36
Live and Let Die
|
|
« Reply #182 on: August 04, 2011, 11:09:53 PM » |
|
 Now C4E can use AGAIN you Bigest Solution to Unlock this LITE ON 16D4S Like you solution with TARABLINDA, but, I think Sputnik will leave orbits before the hour LOL. But their maybe can use again you Tricks to Welcome JF 1.86, like C4 says. ( Soon ). Thanks GEREMIA you later, but not failure! I Used an Hobie Kit ( Portable Drill Kit ) and Smoke Lighter, Tip: if anybody here doesn´t have a Drill, just use these small motors which comes inside radio control mini cars, these can be usefull when the cash is low. Thanks everybody, and sorry for my bad english. Uhuuulll Nova iguaçuuuu. Brasil - Rio de Janeiro
|
|
|
|
|
Logged
|
Xbox 360 S 250gb, PS3 Fat 160Gb+640Gb USB + Backward JAILBROKED.
|
|
|
|
routehero
|
|
« Reply #183 on: August 05, 2011, 12:56:08 AM » |
|
I am likely one of the least handy persons to ever pick up a Dremel.
That said, I managed to cut the hole, unlock, flash and lock.
It took me a fairly long amount of time to cut through the chip, over 10 minutes. I was being extremely cautious, taking breaks, etc.
"not noob friendly" == "not child friendly"
|
|
|
|
|
Logged
|
|
|
|
|
engine620
|
|
« Reply #184 on: August 05, 2011, 01:23:09 AM » |
|
Finally managed to flash the 0225 with JF. But one big problem now:
- backups work, so flashing was OK
- tray close works (albeit it closes very rapidly, in less than a second!)
- eject won't work, have to eject manually. It twitches just a bit and stops.
I don't think it's mechanics problem. Anyone hit that problem yet?
witch eject doens't work? the one on the consolle? try to eject with pad function. check the frontplate, maybe some wire in out of normal position. post feedback of your try. |
|
|
|
|
Logged
|
|
|
|
|
jackinthexbox
|
|
« Reply #185 on: August 05, 2011, 02:35:08 AM » |
|
Stop posting nonsense, the solution was allready given by Riku  Just an idea with this kamikaze mod. What about if we drill just a little and then add a drop of sulfuric acid and let it work. would it not be safer? I allso have up to 800x digital microscope I might try it if i get back from my vacation next week. |
|
|
|
« Last Edit: August 05, 2011, 02:38:20 AM by jackinthexbox »
|
Logged
|
|
|
|
saikyo
Newbie
Posts: 3
|
|
« Reply #186 on: August 05, 2011, 02:44:48 AM » |
|
Hey guys i have a question: Can i splice the wire with the 100ohm resistor to the 3.3v wire in the power cable, or does it have to be soldered to the board?
|
|
|
|
|
Logged
|
|
|
|
|
glaze83
|
|
« Reply #187 on: August 05, 2011, 02:47:54 AM » |
|
Hey guys i have a question: Can i splice the wire with the 100ohm resistor to the 3.3v wire in the power cable, or does it have to be soldered to the board?
Of course you can, that's how I have mine setup  |
|
|
|
|
Logged
|
|
|
|
|
miskan
|
|
« Reply #188 on: August 05, 2011, 05:41:01 AM » |
|
Try this, it helped some people to fix eject/closing problems. Wow, that solution works like a charm! Thanks a lot, you made my day. Tried with 66 ohm first, didn't work, then it started working with 50 ohm resistor. But I'm getting the Open Tray error now (will trouble ever stop?), immediately after tray close. I'll wait for a new iXtreme later today and then we shall see... UPDATE: had to put in all 4 screws instead of just 2, open tray error went away. |
|
|
|
« Last Edit: August 05, 2011, 05:46:31 AM by miskan »
|
Logged
|
|
|
|
|
miskan
|
|
« Reply #189 on: August 05, 2011, 05:41:58 AM » |
|
[mistake post, delete please]
|
|
|
|
|
Logged
|
|
|
|
128bit
Member
Posts: 19
ITA360.COM Rulez
|
|
« Reply #190 on: August 05, 2011, 06:45:59 AM » |
|
I Unlock Winbond 1023-BLSL whit Geremia Metod and all go ok ,it work all so much and i so happy! ^_^ video here: http://www.youtube.com/watch?v=WqcF-MLPU0wBut i Try 1019-BLSL and still hav problem the open tray problem (or sometime if power on xbox360 the try will come open but SO FAST amazing) I Hav try fix it whit this http://img696.imageshack.us/img696/2482/acba7f06ed5f.jpg but i this period don't hav 50/62 ohm so i try it whit 10-22 and 100 The tray open but SO FAST SO FAST and close SO FAST SO FAST and when close don't read anithing (laser lens is ok but not make good his work) I Will go try whit 50 to 62ohm next day but i don't think i can fix coz problem is tray open SO FAST SO FAST same crazy.... p.s. Misterfly please stop disturb me whit bad word italian message in Private message i don't know you so u respect or shut up. |
|
|
|
« Last Edit: August 05, 2011, 08:16:19 AM by 128bit »
|
Logged
|
W C4evah W Geremia W Maximus
|
|
|
|
Pacote-san
|
|
« Reply #191 on: August 05, 2011, 10:09:19 AM » |
|
Stop posting nonsense, the solution was allready given by Riku Just an idea with this kamikaze mod. What about if we drill just a little and then add a drop of sulfuric acid and let it work. would it not be safer? I allso have up to 800x digital microscope I might try it if i get back from my vacation next week. I tried this yesterday and posted it was sucessfull but i used a 68 ohms resistor Today i tried turning and it wont eject anymore, tried with a trimpot set to 51ohms and no go i think the 68ohms might have killed something |
|
|
|
|
Logged
|
|
|
|
Riku
Newbie
Posts: 2
|
|
« Reply #192 on: August 05, 2011, 11:04:09 AM » |
|
I tried this yesterday and posted it was sucessfull but i used a 68 ohms resistor
Today i tried turning and it wont eject anymore, tried with a trimpot set to 51ohms and no go
i think the 68ohms might have killed something
How much watt resistor you used? If it's not enough, It may get burned. Try to replace it with bigger one. |
|
|
|
|
Logged
|
|
|
|
|
Pacote-san
|
|
« Reply #193 on: August 05, 2011, 11:27:28 AM » |
|
I tried this yesterday and posted it was sucessfull but i used a 68 ohms resistor
Today i tried turning and it wont eject anymore, tried with a trimpot set to 51ohms and no go
i think the 68ohms might have killed something
How much watt resistor you used? If it's not enough, It may get burned. Try to replace it with bigger one. 1/4w i think |
|
|
|
|
Logged
|
|
|
|
|
miskan
|
|
« Reply #194 on: August 05, 2011, 11:55:08 AM » |
|
I tried this yesterday and posted it was sucessfull but i used a 68 ohms resistor
Today i tried turning and it wont eject anymore, tried with a trimpot set to 51ohms and no go
i think the 68ohms might have killed something
Does it still spin the dvd and launch games? Or only problem with eject again? When I used 66 ohm SMD resistor, it actually desoldered itself, so power drop is substantial on it (didn't take any measurements though). Two paraller 100 ohm resistors, which makes a 50 ohm resistance did the trick, ... so far. |
|
|
|
|
Logged
|
|
|
|
bf2itu
Newbie
Posts: 4
|
|
« Reply #195 on: August 05, 2011, 12:01:18 PM » |
|
Staff speaks!
I have several drivers aki just right and 0225 left over to making the holes.
Some I made the hole, ran good, others took issue drawer.
Came to an XBOX Unlock ...
Driver got it done correctly, cutting track ... took to the PCB and testing I did with the hole ... aki
I did the first plate, hole, has not put ta 0x0 status by opening the drawer, there did FIX the drawer and now it's a good opening and closing the DVD spinning ta normal.
Now another here, with this 0x0 Status tmb, Drawer does not open, I did FIX the drawer, it worked but the engine does not turn ...
Broke a track inside the chip, do not send power pro engine
That f***ing ta
chip that is because I made the soundtrack to status 0x0 is almost on the surface of the chip
chip and has the track gets to the bottom but it varies a lot ...
|
|
|
|
|
Logged
|
|
|
|
|
Pacote-san
|
|
« Reply #196 on: August 05, 2011, 12:36:35 PM » |
|
Staff speaks!
I have several drivers aki just right and 0225 left over to making the holes.
Some I made the hole, ran good, others took issue drawer.
Came to an XBOX Unlock ...
Driver got it done correctly, cutting track ... took to the PCB and testing I did with the hole ... aki
I did the first plate, hole, has not put ta 0x0 status by opening the drawer, there did FIX the drawer and now it's a good opening and closing the DVD spinning ta normal.
Now another here, with this 0x0 Status tmb, Drawer does not open, I did FIX the drawer, it worked but the engine does not turn ...
Broke a track inside the chip, do not send power pro engine
That f***ing ta
chip that is because I made the soundtrack to status 0x0 is almost on the surface of the chip
chip and has the track gets to the bottom but it varies a lot ...
Dont use translators... it turned your portuguese-br into gibberish |
|
|
|
|
Logged
|
|
|
|
|
hossam99
|
|
« Reply #197 on: August 05, 2011, 01:15:29 PM » |
|
|
|
|
|
|
Logged
|
|
|
|
|
gavingt
|
|
« Reply #198 on: August 05, 2011, 02:18:45 PM » |
|
1. Run JF 2. Power on DVD drive 3. Press Intro Device ID 4. Put the PMT on MPX01 5. MTK Vendor -> Yes 6. Power off -> on 7. done!! Vendor Mode |
|
|
|
|
Logged
|
|
|
|
jengen31
Newbie
Posts: 5
|
|
« Reply #199 on: August 05, 2011, 02:27:06 PM » |
|
i have unlock my 0225 all works great great tut but have a problem i cant write my pcb orig files failed md5 hash check whats wrong here thx jengen |
|
|
|
|
Logged
|
|
|
|
|
