0225 Slim Lite-On running with MT1339E Controller

[thuanz]

doesn't the pc dvd rom the 1339 come from have a spi? otherwise how does it store the memory?

[CoDeFl@sher]

doesn't the pc dvd rom the 1339 come from have a spi? otherwise how does it store the memory?

Yes,the pc dvd rom the 1339 come from have a spi,but naturally diferents Manufacturer ID / Device ID.

[iLLNESS]

appearantly the drives used for kreons have the controller/spi needed..

samsung sh-d163. but odds are youll be paying more for this drive since it was in demand at one point in the past to use with kreons

[pspmte]

I had a nightmare with the unlock thank you so much for saving me loads of money with liteon 118

Thanks PC World lol

It really does work swapping the mt1339 and benq spi

Btw i found flash the ofw first then cfw or the drive locks up


Thanks so much

[CoDeFl@sher]

I had a nightmare with the unlock thank you so much for saving me loads of money with liteon 118

Thanks PC World lol

It really does work swapping the mt1339 and benq spi

Btw i found flash the ofw first then cfw or the drive locks up


Thanks so much

No problem on flash CFW directly,since you has used your original dummy as source.

[yagamiar]

I´m needing to repair one drive, do you believe that a MT1839lpn IC can be used as replacement?
Thanks

[manvslife12]

i have problem with motor and laser eye because drill too deep. 1 dremel, 1 solding iron. i find 1 shop in shenzhen china selling the MT1339E+MX25L2005MC REPLACEMENT FOR MT1335WE (you can search it) i have just ordered 10 from him, now waiting for it the pride is about 20 25$ for both IC. hope everything will be ok

[thuanz]

stuck on status 80, i suspect a faulty spi, will the drive go into vendor mode without an spi? or at least show a status change in jf?

[miki4]

appearantly the drives used for kreons have the controller/spi needed..

samsung sh-d163. but odds are youll be paying more for this drive since it was in demand at one point in the past to use with kreons

I have disassembled a SH-D163B right now, but there is no MT1339, it is an MT1309. What a pity...
Does it have to be D163C?

EDIT:
Yeah, bought a D163C and there is a MT1339E in it.

[d4m4n]

I got the MT1339E+MX25L2005. I also just used one set of 0225 unlock pro kit (xecuter). It got the MX chip on a white pcb with a switch. What does the switch do? Set MX pin 3 to GND or 3.3V? I already gave the modded machine back to the customer and did not measure what the switch does.

[miki4]

You can also use TS-H353C drives as source for the MT1339E. They have the same drive board as the SH-D163C.
The "C" is very important. "B" drives have older boards with other controllers.

[TheTechnician]

i have problem with motor and laser eye because drill too deep. 1 dremel, 1 solding iron. i find 1 shop in shenzhen china selling the MT1339E+MX25L2005MC REPLACEMENT FOR MT1335WE (you can search it) i have just ordered 10 from him, now waiting for it the pride is about 20 25$ for both IC. hope everything will be ok

this one ?

Code:

http://www.diytrade.com/china/4/products-list/0-k-c-1/MT1339E.html

[laruku]

can i use this SPI ??



found this on Samsung SH-163C
i can flash with dosflash 2.0
but can't flash with JF

[galo911]

There is a couple of guys selling "pro kits" on Ali-Baba. Check it out... http://www.china-direct-buy.com/v/4/product_detail/8995639/MT1335We_mediatek_for_xbox360_Slim_lite-on_16d4s_dvd_drive.html
Don't know the price though... It can't be more than their original "first buyer" was charging us... 
Just mentioning because getting parts from here and there, dismantling, adapting, tweaking... just too lazy for that
If somebody already posted this, sorry i didn't check here in a couple of days.

[glaze83]

Not sure if it's ok to post this but I have a number of MT1335WE available for those that need replacements -- feel free to pm me.

[manvslife12]

Hello everybody i thinks this can help many man 
Today i open my brand new LG DVD-Rom. It have all things you need for rebuild your lite-on. MT1339E and MX25L2005MC two things on broad.
LG DVD-Rom Drive Model : DH16NS30
in my country it cost 10$ for 2nd and 16$ for brand new.
Hope this help.

[playonlcd]

If somebody from Europe needs MT1339E and MX25L2005MC PM me.

[d4m4n]

Is there any need to do any extra locking like in the xecuter pro kit?
I installed one pro kit but did not measure how the locking switch works.
Does it only switch MX25L2005 pin 3 between GND and VCC?

[CoDeFl@sher]

Is there any need to do any extra locking like in the xecuter pro kit?
I installed one pro kit but did not measure how the locking switch works.
Does it only switch MX25L2005 pin 3 between GND and VCC?

YES,you need to keep SPI locked in both in hardware and software after you write FW.

HARDWARE LOCKED = PIN 3 of spi tied to GND.
HARDWARE UNLOCKED = PIN 3 of spi tied to VCC(3,3v)

SOFTWARE LOCKED = spi status 0x8C 
SOFTWARE UNLOCKED = spi status 0x00

[mprace]

If my set is not going online, are there any other actual problems with leaving it unlocked?