Please help lol

[dantheman]

First cock up for new year lol. Hi all.. I will keep this short as. Ok so i have a Jasper (16mb) with dash 7371 and dumped 3 nands all identical with no bad blocks but forgot to do the last check for CB before flashing xell and it turns out to be CB6750 to which we know is a no go! So... after flashing back original nand through JTAGTOOL as soon as it stops writing the nand back the console starts to boot?? The main problem is that the console now dont want to stay booted... it wants to turn off all the time. Im wondering what to do now that will help?? Thanks in advance.

[bluespace77]

As "JTAG Tool" just uses NandPro to flash the NAND, why don't you directly use NandPro and see if that works better? Cut out the middleman so to speak.

[dantheman]

Thanks for reply buddy but it gets worse as now the original dumps were deleted.

[Arakon]

You could sit down and cry.
Since there's no way to get the CPU key for this console, it's f***ed unless you can get the original dump back.