12611 FreeBoot BOOT SCREEN HANG

[psphunter]

any one help try update from 9199 to 12611 but boot screen hag
old freeboot.bin say
Found Block ID 0x01FC at offset 0x01073A00
Found Block ID 0x0158 at offset 0x01077C00
Found Block ID 0x014D at offset 0x0107BE00


UPdFlash.bin NO BAD Blocks FOund
in BadBlockMover
if i flash old freeboot.bin back it work :S by on 9199


so how i get 12611 FREEBOOT WORKING

[l_oliveira]

BadBlockMover.

Find an Hex editor program, open the 12611 image in it and change the Microsoft copyright string to what you have on the XBR file.
Run it through the BBM tool, using the freeboot 9199 image which works as "original MS image". Then open on hex editor again and put the MS copyright string back as it was before you edited.


That works for me here.

[bluespace77]

Open the NAND dump in XNandHealer, see if they come up as Bad Blocks or as ECC Error Blocks.

If it's ECC Error blocks, I manually remapped with NANDPRO and mine worked fine. If It's Bad Blocks, Xellous or XBRFlash should be able to remap them while flashing.

[psphunter]

remaped
14D to location 3FF
158 to location 3FE
1FC to location 3FD...

with  NANDPRO all good thx a lot

[Dabuisnez]

I have same prob but no access to lpt o usb flashed to use xnandhealer. None of my images show babd blocks when i use degraded or flash dump. Only when i dump flash using flash360 do i see bad blocks. Any ideas?

[l_oliveira]

Yes, you need to mimic that mapping on the new file you're trying to flash or else it will never work.