JTAG Help - Nandpro20d Error 201

[GxTanklinxG]

I am using a USB SPI flasher. I have done this before so I know that my wiring and soldering is correct to the best of my knowledge. I have visually inspected it and during my Nand read...I get Error: 201 reading block ____ <---Insert random block number here. It varies from read to read. One time I will get it 6-7 times and that is it, other times I can get it 50-60 times. I do not know what Error 201 means, nor can I find anything out about it. Any help would be greatly appreciated. Thank you!

[moejoe]

Hi,

you should check all connections from board to SPI flasher and from ther to your PC. Also check for a ground connection to the board. random block read errors will occur due to a bad connection or long wires.

Good luck, moejoe