Convert dumped nand.bin to nand.raw?

[techboy]

Hello friends.
I`ve  got a MAUSB-10 xD Crad reader/writer and want to write my XBR dump to 16MB xD card.

But card_tool application work only with *.RAW files, my XBR dump is *.BIN

How can I use my BIN dump?

[Arakon]

why not solder the card in and use the lpt or usb flasher to write to it?

[techboy]

I have a problem with NAND comunication, I think the problem is with SPI controller.

LPT can`t connect to controller

I trying now xD card method with MAUSB-10. Do you think writing .BIN image to xD card will solve my problem? I have not .RAW dump.

[cory1492]

This program handles the aluada chipset devices and uses files of the same type as normal dumps done over spi. Ignore the 'PSP' in the file name, it wasn't made PSP specific.

[techboy]

Thank you cory1492  

I`m going to try it now.

After erase card, I`m using command:
alut.exe -x -w XBR_RedElite-orig-RE2-Jasper16_8955_3.bin

Code:

----------------------------------------------
        Alauda USB NAND interface V0.5
----------------------------------------------
Initializing USB device...
Olympus MAUSB-10 detected (vid: 0x07b4 pid: 0x010a)
Insert media and close lid switch
xD NAND is present
Media signature: 0x9873A5BA
NAND info      : Toshiba 16MiB 3.3V 8-bit NAND
NAND initialized successfully!
Device reports ready!
Opening file: XBR_RedElite-orig-RE2-Jasper16_8955_3.bin
Writing - do not remove card or open lid!
100% 1024/1024


Writing complete!
Skipped 88 blocks with no data

press <enter> to quit...

It`s realy fast, I`m going to solder card in my console and give a try.

[techboy]

This program handles the aluada chipset devices and uses files of the same type as normal dumps done over spi. Ignore the 'PSP' in the file name, it wasn't made PSP specific.

Thank You again cory1492


After a massive soldering, my console is alive 

ala PSP RAW NAND 0.5 program is perfect for writing NAND .bin dumps directly to xD memmory.
Working with Windows 7

Using steps:
[1] Remove MAUSB-10 xD Crad reader/writer drivers from your system
[2] Manualy install drivers from windows_libusb_alut_driver_v2 folder
[3] Close the LID on Card reader/writer
[4] With command prompt navigate to extracted program directory and type alut.exe (It`s give an usage hints)
[5] Now you can erase xD memmory card with command alut.exe -x -e
[6] Copy your dump file to program directory and give a shot
[7] Write your NAND dump to xD card with falowing command alut.exe -x -w YOUR_DUMP.bin
[8] Your xD card is ready. Solder it to xBox`s mainboard and you are ready to PLay 

all credits to cory1492

[Dicko316]

Anyone got an updated link for this program show above? I've looked all over the place with no luck.

[cory1492]

ala_PSP_RAW_NAND_0.5fin_p1.zip
http://www.mediafire.com/?wx7w0xxmbiefi39

[Dicko316]

Many thanks for the link

[sintetix]

I would really appreciate if somebody post ala_PSP_RAW_NAND tool again.
Preferably with sources.
All links I have found are broken.

[cory1492]

http://db.tt/qfw5Y0vF
same file as before
ala_PSP_RAW_NAND_0.5fin_p1.zip

[sintetix]

Thank you very much!
I also have posted a question on ps3hax http://www.ps3hax.net/showthread.php?p=408452. I hope you can help with it too.