XboxHacker BBS
 
Home Help Search Login Register
*
Welcome, Guest. Please login or register.
Did you miss your activation email? 		May 21, 2013, 09:23:53 AM


Login with username, password and session length


XboxHacker BBS > Xbox 360 > Tech Support 360 (Moderators: SiliconIce, Arakon, Redline99) > boxxdr method - trace broken
Pages: 1
« previous next »
  Print  
Author Topic: boxxdr method - trace broken  (Read 1421 times)
dogged
Member
**
Posts: 29


View Profile
« on: July 09, 2010, 02:51:57 AM »
Hello guys.
I have a xbox with removed resistor and broket trace - the guy, who gave me console said that he can`t repair it after lame soldering.
How i can restore it? Which resistor was here?
Thanks.
« Last Edit: July 09, 2010, 03:13:36 AM by dogged » Logged
ReverseAffect
Xbox Hacker
*****
Posts: 1345

360Reball


View Profile WWW
« Reply #1 on: July 09, 2010, 03:10:05 AM »
it's the same as R2P13 which is 9.0
Logged
sick like a mofo..not reballing for a while...
dogged
Member
**
Posts: 29


View Profile
« Reply #2 on: July 09, 2010, 03:15:11 AM »
Thanks.
But how i can repair traces? Using wires?
Logged
ReverseAffect
Xbox Hacker
*****
Posts: 1345

360Reball


View Profile WWW
« Reply #3 on: July 09, 2010, 03:39:46 AM »
I would suggest when adding the new resistor, the pad to the left(from your pic) looks intact,
so that's not a problem re-mending that.
the pad on the right(2 traces) you just need to scratch off some of that broken trace that you,
 can see the end (located in the middle of the pads).
as for the trace missing add the wire and diode from the alt spot FT1U2 to the right pad of R2P12(your pic)then glue it down after testing the connections...
« Last Edit: July 09, 2010, 04:24:07 AM by ReverseAffect » Logged
sick like a mofo..not reballing for a while...
dogged
Member
**
Posts: 29


View Profile
« Reply #4 on: July 09, 2010, 03:56:10 AM »
Ok, i will try it today and post here my results Smiley
I need to add diode between FT1U2 and R2P13 only if i need Jtag? Because i want return this console to stock dashboard.
Logged
ReverseAffect
Xbox Hacker
*****
Posts: 1345

360Reball


View Profile WWW
« Reply #5 on: July 09, 2010, 04:23:37 AM »
Quote from: dogged on July 09, 2010, 03:56:10 AM
Ok, i will try it today and post here my results Smiley
I need to add diode between FT1U2 and R2P13 only if i need Jtag? Because i want return this console to stock dashboard.
no you need to add a diode between FT1U2 and R2P12 only if you need to Jtag...
where was it said to add the diode to R2P12?
Logged
sick like a mofo..not reballing for a while...
Dream
Master Hacker
****
Posts: 435



View Profile
« Reply #6 on: July 09, 2010, 05:15:27 AM »
It is 10K ohm resistor.

Edit1: You can remove r6t3 it is also 10K ohm resistor and use that to repair the broken one.
« Last Edit: July 09, 2010, 05:55:03 AM by Dream » Logged
ReverseAffect
Xbox Hacker
*****
Posts: 1345

360Reball


View Profile WWW
« Reply #7 on: July 09, 2010, 07:10:58 AM »
good call there dream Smiley
Logged
sick like a mofo..not reballing for a while...
dogged
Member
**
Posts: 29


View Profile
« Reply #8 on: July 09, 2010, 08:05:03 AM »
Hey, it`s me again.
I have found alternative points with multimeter`s help.
Can you check my diagram, all right here?
And, it`s 9 ohm or 10k ohm resistor?
Logged
Pages: 1
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC

Valid XHTML 1.0! Valid CSS! Dilber MC Theme by HarzeM