Bick the Cpu by pulling out the motherboard from cage

[Copper-Bit]

Is it possible, if you put out the board from the cage,that the heatbodys can come losse and you won't notice it.

Because I've got a Falcon box here -new testet and everything was fine - but if i start it it gives me ROD
and after some starts it will work.But i always need to start it some times.
Solderig looks good.Did a Falcon before and everything was ok, this one was even better soldered.
So did i damaged something?

[maximilian0017]

So did i damaged something?

Possibly, always look at the secondary error code and always treat boards with care.

[Copper-Bit]

I treated it with a lot of care.

[Copper-Bit]

error
0021: DVD Drive Time out

ok there was no drive conncted as i did that, but after i connect one it needs even more retries to start.

now it's a bad topic.

[maximilian0017]

error
0021: DVD Drive Time out

If you modified the dvd drive unmod it as a test, also you can try to ever so gently apply some pressure on the SB chip and startup to see if it came loose, possibly it would be enough to lay your finger on it.