xbox 360 non hdmi doesnt detect flash controller

[xboxtech]

Hi all got a xbox im trying to read the nand when I type in nandpro it seraches for lpt at the 3 addresses and it says flash controller not detected,, anyone have this or solve this?

[Arakon]

there've been a $#!tload of postings on this already. you messed up your wiring, your lpt port doesn't work for this, wrong bios settings, etc.

[xboxtech]

Ok couldnt find much on it except a few sites but thats all.

[sonikki]

Are you 100% sure that you have connected wires to right pins and you haven´t messed up the pins in the diagram?

What kind of LPT-port are you using? First thing to do in nand reading problems is to try another computer if possible, older LPT-ports works better than newer ones.

[xboxtech]

Ill have to get a new diagram and see as far as it looks I have ill get a new 25 pin d sub and re work it and try again.  I have a lpt card in a pci slot motherboard its new and installed in pc as ecc i think it said, so thats working

[sonikki]

After you are sure that your wirings are OK I recommend you read the nand with computer which has integrated LPT-port because PCI-LPT:s aren´t good at all in this kind of stuff And rather with the older computer, I got better results and even faster reading with my old as hell 700MHz computer than mine much newer one.

[xboxtech]

Ah ok I wonder if its the pci slotted card then, might have to invest into usb or cygnos chip next

[Gazcoigne]

cygnos is a waste of time just buy a USB reader

[xboxtech]

Thanks thats what I hear to,, am looking around for one

[uN0pEn]

I have come across a few clients who have somehow burned out there SPI port(?) on X-S. The console still works flawlessly but there is no NAND flashing options via the SPI. The way I have found to bypass this is to remove the NAND from the motherboard and flash in another device and then reinstall the NAND. I have done this a few times. If you are not capable, contact me and we can get you up and running!


Thanks.