zipperhead
Newbie
Posts: 1
|
 |
« Reply #900 on: November 25, 2010, 01:32:28 AM » |
|
My friend gave me liteon 9 series that he attempted to dump. Every single pad that the Lt switch touches is torn up. Can i send it to someone to retrieve the key or just tell him to throw his brand new elite away?
|
|
|
|
|
Logged
|
|
|
|
Bhuthogg
Newbie
Posts: 3
|
|
« Reply #901 on: November 25, 2010, 03:59:52 AM » |
|
 heres a pic of my board, as you can see theres little chance of a short? The mt is getting hot, I resoldered the cuts. no deals just hot mt. checked resistance as posted getting 3ohms ish between gnd and most of the exposed tracks/pads + beween 3.3v i have no ideas now. anyone offer a bit insight? |
|
|
|
|
Logged
|
|
|
|
ss30
Newbie
Posts: 4
|
|
« Reply #902 on: November 25, 2010, 06:06:52 AM » |
|
I lifted pad 122  so tried to fix but took off a capacitor  can this be fixed? What is the capacitor value? Can it be replaced with a non surface mount one? Thanks ss30 |
|
|
|
|
Logged
|
|
|
|
|
Dream
|
|
« Reply #903 on: November 25, 2010, 07:25:13 AM » |
|
I have a 93450c and did it exactly the way I've done my other one. With a ltswitch, ok so it was all lighting up red/green. Ok all looked well so plugged into ck3 and sata and nothing would work no LEDs on the switch although the ck3 was lighten leading me to believe the board is not shorted out, I have run a multimeter on several points and all looks ok cuts tracks etc, so I'm lost sat it was only moved 3 foot and it stopped working,
I'm in the uk if anyone can help?
Sorry for the first post drama
 "We can repair ALL Xbox 360 drives and PCB’s whatever damage has been done to them" http://www.ltrepairs.co.uk/I would like to know the secret of the burned MT Chip... |
|
|
|
« Last Edit: November 25, 2010, 07:40:31 AM by Dream »
|
Logged
|
|
|
|
|
Dream
|
|
« Reply #904 on: November 25, 2010, 07:30:02 AM » |
|
ss30,
There is no need to fix that, happy gaming.
Make 3,3V line fix jump wire r207---C03.
|
|
|
|
« Last Edit: November 25, 2010, 07:31:53 AM by Dream »
|
Logged
|
|
|
|
ss30
Newbie
Posts: 4
|
|
« Reply #905 on: November 25, 2010, 08:08:23 AM » |
|
ss30,
There is no need to fix that, happy gaming.
Make 3,3V line fix jump wire r207---C03.
Thank You |
|
|
|
|
Logged
|
|
|
|
ss30
Newbie
Posts: 4
|
|
« Reply #906 on: November 25, 2010, 08:32:52 AM » |
|
@Dream Do I need to leave the wire from R207 --- C02 so there is one wire from C02 to R207 and one from R207 to C03 or just a wire from R207 to C03?
Thanks
ss30
|
|
|
|
|
Logged
|
|
|
|
bl4de
Newbie
Posts: 9
|
|
« Reply #907 on: November 25, 2010, 09:16:36 AM » |
|
anyone help please need to get key from 74 drive when i probe it no green light think my ck3 is faulty any other way of gettin key beside cut tracks and stuff
|
|
|
|
|
Logged
|
|
|
|
|
iateshaggy
|
|
« Reply #908 on: November 25, 2010, 10:03:01 AM » |
|
if it has ixlt on it then yes.
|
|
|
|
|
Logged
|
|
|
|
bl4de
Newbie
Posts: 9
|
|
« Reply #909 on: November 25, 2010, 10:07:49 AM » |
|
no orig firm on drive i can cut tracks and do like 9 drives but its a pain
|
|
|
|
|
Logged
|
|
|
|
|
Dream
|
|
« Reply #910 on: November 25, 2010, 12:52:39 PM » |
|
@Dream Do I need to leave the wire from R207 --- C02 so there is one wire from C02 to R207 and one from R207 to C03 or just a wire from R207 to C03?
Thanks
ss30
Only R207 to C03. |
|
|
|
|
Logged
|
|
|
|
b1gdeano
Newbie
Posts: 2
|
|
« Reply #911 on: November 26, 2010, 05:39:02 AM » |
|
Hi, I have been reading through this thread, as I stupidly thought I was capable of succesfully cutting the required traces to use the CK2 probe to dump the drive. I was wrong  While I dont think I have buggered the board up that bad, I have damaged the pad 101, and it wont recognise the drive in jungle flasher at all I am hoping some folk here will be able to help me see if I can revive the board myself, before I see about sending it in to someone else to fix my error! I was thinking about doing what was described in the very first post, would that be the best thing? Also, and this is really probably a stupid question, but what reading is the multimeter supposed to give once the trace is successfully cut? Here are some pics of my board as is stands, sorry for the quality!   |
|
|
|
|
Logged
|
|
|
|
|
iateshaggy
|
|
« Reply #912 on: November 26, 2010, 11:58:47 AM » |
|
your board is fine, it isn't supposed to show up in jungleflasher. just make sure you selected the right port, hit intro, then power teh drive while pushing the button your your probe 2 then let go of the button after it finishes introing.
|
|
|
|
|
Logged
|
|
|
|
b1gdeano
Newbie
Posts: 2
|
|
« Reply #913 on: November 26, 2010, 12:19:57 PM » |
|
Thanks Iateshaggy!
My board was fine, it was me being a noob!
Didnt realsie it didnt appear in JF at first!
I got the key dumped and flash sorted!
Thank You!!
|
|
|
|
|
Logged
|
|
|
|
inturbo
Newbie
Posts: 9
|
|
« Reply #914 on: November 29, 2010, 05:07:41 AM » |
|
Hi all. I have a busted 74850C board. Maybe someone have a spare working 74850C board and is willing to sell one to me and send it to Lithuania? I need to get that drive working  . PM me |
|
|
|
|
Logged
|
|
|
|
|
xboxer1234
|
|
« Reply #915 on: November 29, 2010, 10:15:56 AM » |
|
Hi all. I have a busted 74850C board. Maybe someone have a spare working 74850C board and is willing to sell one to me and send it to Lithuania? I need to get that drive working . PM me It doesn't work that way if you don't have the DVD key. If you do, then nvm. Post some pics of the board. |
|
|
|
|
Logged
|
|
|
|
inturbo
Newbie
Posts: 9
|
|
« Reply #916 on: November 30, 2010, 05:11:59 AM » |
|
I do this for many years. Of course I have the key. The board is missing some smd parts, tracks are busted. Client tried to update it by him self. Lucky I have his backup. I wont try to rebuild the board. I just need a new one |
|
|
|
|
Logged
|
|
|
|
allobywt
Newbie
Posts: 5
|
|
« Reply #917 on: November 30, 2010, 07:54:36 AM » |
|
I have been looking through various threads but cant see anything like my problem wich is -i was flashing liteon 74850c with connectivity kit and ck3 probe the newest one with 2 spears anyway as i was using probe i must have touched something because the probe led went out and drive is dead now when i have kit plugged into drive and turn power on , the led s light up briefly then go out and drive is still dead i had an old board and changed 2 large capacitors but it is the same,is there any way to test board i have a multimeter but dont know where to start .by the way i know the connectivity kit is working cos i plugged it into another drive and led s light up and stay on thanks in advance Alby.
|
|
|
|
|
Logged
|
|
|
|
Screamo
Newbie
Posts: 6
|
|
« Reply #918 on: December 02, 2010, 08:17:55 AM » |
|
|
|
|
|
« Last Edit: December 02, 2010, 09:01:43 AM by Screamo »
|
Logged
|
|
|
|
|
iateshaggy
|
|
« Reply #919 on: December 02, 2010, 05:35:10 PM » |
|
can you solder very small things and remove epoxy?
|
|
|
|
|
Logged
|
|
|
|
|
Dilber MC Theme by HarzeM