How to repair lite-on pad 101

[Dream]

danymally,

I never thought that, you were able to do that. Great job man.

kkingsley930,
Reply #90
Repair the picture is coming.

[danymally]

UPDATE:
I Have fixed the drive. he Work! 
But the game going a bit slow and I will change the dvd drive
soon.
thank you so much for your work!
Bye

[scar123]

is there anyone that is good at least dumping the ofw off these boards i got one in today that is pretty bad but not as bad as some of these pics i seen on here lol.  I can ship the bored off to you and see what you can do. i dont care about fixing it just getting the ofw off it and be willing to donate you some money for your time. If you can please pm me.

Usually when someone messes up like this im able to pull the key atleast with the vampire and just put another drive in. But even with my vampire i cant get it to go into vendor mode

[kkingsley930]

danymally,

I never thought that, you were able to do that. Great job man.

kkingsley930,
Reply #90
Repair the picture is coming.

hope you get it Dream. keep up the good work.

[Dream]

Here you go.

Always install the black jump wire.

[kkingsley930]

Wow this looks like its gonna be fun. I will let you know my results in a day or two. A million thanks to you Dream. This is a dream come true to me. Lets hope I can get the key and rescue this poor box.

[kkingsley930]

Thanks a million Dream. I fixed the board, after I was able to give it life I jimmy rigged the LT switch to it, got my key and flashed it with the LT firmware. That picture you made for me saved a limited edition cod4 mw2 xbox.

[krazyone2006]

ok hello yall new to the forums here but not new to modding 360's and other consoles had someone bring me a lite-on 7series drive they tried dump and flash and messed up cutting the traces on so they of course brought it to me to fix kinda at a lose keeps locking 360 and PC when you hook it to either heres some pics i snapped hopefully you can help me i still need to dump the firmware and key on it but enough heres the pics thanks if you can help too







if you could even draw out in MS paint on the board itself what i cgot to do that would be even more awsome thanks again (i have a spare drive here to spoof as it so the drive dosen't even have to go back in the 360 i just need the firmware and key off it )

[Dream]

krazyone2006,

Clean it and dump it.

FW dump


FW dump


Your stock fix


Ps. Do you want to party with me: http://dream.pic.fi/kuvat/Xbox+360/L%E4mp%F6tilat/Falcon+temp+run1.avi
@Falcon MB Fan@11V

[krazyone2006]

thank you dream i will be trying it as soon as i get home from work the kid brought me a benq so i am just going to dump this lite-on and spoof the benq as it will let you know how it goes when i get home thank you again dream

[iateshaggy]

ixtreme lt doesn't support spoofing.  use the repair he showed you or get a new liteon ($30 at fleabay).

[krazyone2006]

ok it shows it in jungle flasher now dosen't freeze up pc upon powering the drive up 0x50 got it all hooked up the way you got it diagramed out but in jungle flasher it keeps giving status 0x51 and just ..........never kicks into vendor mode any clue thanks again






~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JungleFlasher 0.1.70 Beta

Session Started Wed Mar 17 20:56:28 2010



This is a 32 bit process running on 2 x 32 bit CPUs

portio32.sys Driver Installed

portio32.sys Driver Started, thanks Schtrom !

Found 4 I/O Ports.

Found 0 Com Ports.

Found 9 windows drives C: D: E: F: G: I: J: K: L:

Found 1 CD/DVD drives G:



Sending Vendor Intro to port 0xB400

Status 0x51

Re-sending Vendor Intro:

...

Device Intro failed!

Sending Vendor Intro to port 0xB400

Status 0x51

Re-sending Vendor Intro:

...

Device Intro failed!






thats all i get in jungle flasher when hitting intro vendor mode it will just sit there ......... till i either close jungle flasher or it will come back as vendor mode failed any clue please help save a lite-on LOL

[fleshdeep]

In order to dump the fw/get my key after fixing pad 101, do I need to have the wire on 122 to the left or right of the cut trace?

[fleshdeep]

Nevermind I did it!

[Dream]

krazyone2006,

Give us Pic´s what is going on.

[krazyone2006]

ok thats it hopefully it helps really ready to throw this thing LOL like i said i just want to dump the key and firmwre (calibration data) will be spoofing another drive as it to goback into the 360 thanks

[fleshdeep]

krazy, what I did from your point was fix the cut near pad 101. With that jumper cable it allowed me to get 0x72 and dump the fw immediately.

[krazyone2006]

the black wire in the other pics in topic above will try it as soon as soldering iron heats back up thanks


added the jumper and still the same thing same status device intro failed no clue what else to do i'm actually to the point where i'm ready to ship it off just to get the firmware and key off it LOL amd donate cash to whoever can do it

[Dream]

the black wire in the other pics in topic above will try it as soon as soldering iron heats back up thanks


added the jumper and still the same thing same status device intro failed no clue what else to do i'm actually to the point where i'm ready to ship it off just to get the firmware and key off it LOL amd donate cash to whoever can do it

I help you pm me.

[fleshdeep]

This is exactly how I dd mine after i pulled up pad 101. I connected the trace fr 101 and kept 122 trace cut. I also didn't use the switch just crossed the wires. 22 and 20ohm didn't work so I got a 15ohm resistor and bam it worked.