E79 after Xell? Falcon

[subvertboy]

First, sorry for my bad english.
I have a Xbox360 elite 120Gb Black (2008-08-26) Kernel 2.0.7371.0 Falcon HDMI 175W, never sat and i giving problems with the jtag. I read mi nand many times all ok when i go to write the xell (falcon_hack_updxell.bin Xbins) give e79.
I check many times the jtag and seems looking good, welding many time and nothing. When i rewrite my oiginal nand this work right.
This make my crazy, i dont know if problem is cause of a bad jtag or my xbox its no exploitable or the xell for Falcon have many bugs.

For write the nand:

nandpro.exe lpt: -r16 original.bin
nandpro.exe lpt: -r16 original2.bin
nandpro.exe lpt: -r16 original3.bin (all checked with degrader and many files compare)
nandpro.exe lpt: -w16 falcon_hack_updxell.bin 0
Unplug the lpt and power, wait one minute and reconnect power.
Turn on and E79.



How i prove the jtag?
Many with the issue?


Thanks!

[mialex]

check the 3 wires, if isn't connected then it will give e79 error

[subvertboy]

check the 3 wires, if isn't connected then it will give e79 error

what schema is right?

http://hackconsolas.files.wordpress.com/2009/11/spi__jtag_diagram_zephyr-falcon-opus-jasper.png

http://www.ps3news.com/modules/image_upload/plugins/thumb.php?img=img_16806.jpg&w=500&h=400

Thanks!

[mialex]

i wired using this diagram http://www.ps3news.com/modules/image_upload/plugins/thumb.php?img=img_16806.jpg&w=500&h=400

i believe the other one will work too i never tried wire that way and the other one is easier to wire.

[wickwack]

i was getting random e79... after trying to run gta4 episodes disc i would get a guaranteed e79 as well (this being quite odd)... of course after an e79 i got that initial config screen...

i opened my box and check connections, it seemed good, resoldered the wires but that didnt do it... i prepared for the worst (nand shorted, reflash, rewire etc)... but i came home and decided to replace the 330ohm resistors first (yes i have been using that method)... and well that did the trick...

so what started out as random e79 here and there was most likely due to a failing resistor... which i guess could be a diode in any other setups... but eventually this resistor/diode will die... so when that happens youll just have to go back in and fix it...

[WunSick]

Yeah I have this issue too, is the rawconfig needed when using the hacking jungle tutorial (same steps he used and listed above)? Cause it doesnt talk about moving over the config stuff at all....

[Arakon]

copy the config too. it contains important calibration data and your MAC.

[WunSick]

Aww that sucks....