Xtreme firmware for Hitachi 47D Xbox 360

[pst]

I was wondering if orig.bin gets overwritten if you run the xtreme.bat more that once?

[jhyphinwill]

I was wondering if orig.bin gets overwritten if you run the xtreme.bat more that once?

yes if you ran the xtreme.bat from the same directory as the orig.bin from previous flashes

[buzdugan]

Yo guys !

I have a question: If you update your xbox VIA cd/dvd with the default.xex (to play xbox 1 games) file from M$ does it f*** up you firmware ? I have samsung not Hitachi..I posted here cuz for the moment everyone is here .

[stonersmurf]

Yo guys !

I have a question: If you update your xbox VIA cd/dvd with the default.xex (to play xbox 1 games) file from M$ does it f*** up you firmware ? I have samsung not Hitachi..I posted here cuz for the moment everyone is here .

No there are no current updates that will stop the firmware hack.

[buzdugan]

thanks..was just thinking that if I update the xbox it will somehow ruin the fw hack I did...and I need to roll back to orig firmware, update then put fw hack again...cuz I can`t..someone else did fw hack I don`t have it in me to open up an xbox :>

[MongolitaFlo]

Hey guys,

I just celebrated my drive's getting recognized by windows after a while, so I started to run commodore's xtreme.bat (Got a 46). At every step (except the dumping, this works great) I get "fopen() failed". My MSI K8T Neo2-F V2.0 has a "Serial ATA/150 controller integrated VT8237R", that's what the manual says. I hope you can help me. Thanks in advance

Flo

EDIT: Oh sorry, just saw it's the 47 Thread, but I hope you can help me anyway. Sorry

EDIT2: Got it, somehow, the xtrm-e.bin was deleted or not unpacked. Anyway, works perfectly!

[nurenz]

Hi Guys,

I have a P5RD1-VM motherboard (ULI® M1573 southbridge (SATA))
I can see my Hitachi 0047DJ in the BIOS.

I boot the SLAX C.D. after it finished I reset the computer. and eject the SLAX C.D.
I think the hitachi drive is in mode B now, because I can open and close the drive, and the light is flashing


I boot windows, but windows does not see the drive...

Can anybody help me??


Ps. I don't want to try the two wire trick......

[Rogero]

Hi Guys,

I have a P5RD1-VM motherboard (ULI® M1573 southbridge (SATA))
I can see my Hitachi 0047DJ in the BIOS.

I boot the SLAX C.D. after it finished I reset the computer. and eject the SLAX C.D.
I think the hitachi drive is in mode B now, because I can open and close the drive, and the light is flashing


I boot windows, but windows does not see the drive...

Can anybody help me??


Ps. I don't want to try the two wire trick......

While in windows and the Hitachi is flashing (ModeB) goto Device Manager -> DVD/CD ROM DRIVES
right click and : scan for hardware changes.

I use the 2 wires trick to get it in ModeB because always had problems with Slax method..

[Mystic303]

When the message appears that says something about 'modeb' (cant remember exactly what is was), i can reset my pc. I dont have to wait that long.

[sobny]

thank u very much, hope it run in my x360

[mastervigori]

THANKS