JTAG / SMC XeLL Problem, 1RL after installing DVD-KEY in the correct drive.

[ss3goku]

DVD key: 8260CE537072E390866830028BFF6746

OSIG: TSSTcorpDVD-ROM TS-H943Ams28ÍÍÍÍ
[/quote]

try to dump firmware from dvd-drive and look if the dvdkey and drive model (if you're spoofing it ) are the same of what it's writed in you NAND dump.

[Ded Games]

I used exactly the same DVD-KEY that you gave me and gave 1RL

I used the original drive of the island, this exact model TSSTcorpDVD-ROM TS-H943Ams28ÍÍÍÍ, and the result was 1RL.

To ensure that drive my drive is OK, I installed the drive on another island, and it works perfectly on another console.

I do not know what to do.

Thank you.

[ss3goku]

ok...but what i mean is:
dump the firmware from the drive and post here the screenshot
because maybe that drive was just modified spoofing another model

[Ded Games]

Sorry, now I understand.

I will make the upload as soon as possible and post here.

Note: I tested this DVD-KEY with two other drives Benq, and the result is 1RL.

Thank you for help.

[Ded Games]

I have another console Jasper I tried to do the procedure Hack Xell, I could not do because the CB version was high, I returned the original NAND, and now this with the same problem! of 1RL when I put the drive with a DVD-KEY right !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!

Note: I am certain that the problem is not in the drive or the FW because I got the same drive and installed it on another game and it works 100% OK, and I tried to flash the FW on 2 computers with several different FWs and ate original FW.

He was trying to hack Xell in Jasper because I thought it had lost the original DVD-KEY, but today I managed to extract the DVD-KEY drive, but I struggle with 1RL too!!

Now the error appears on the screen and the E66.

Something in this procedure must be corrupted nand of the two islands.

I made several copies of the Original NAND already installed the two and the result is the same.

I tried to delete then install the Original NAND, and the result is always the same.

I'm going not knowing what else to do!! HELP!

[ReverseAffect]

judging by what you first wrote

And when I start the console with the drive with a DVD-KEY correct, the 1RL and nothing appears on the screen.

When I start the console with another DVD drive key incorrect, The Games (Demo) and DVD Movies starts normally.

you said when you started the console with the other dvd drives key,it played games....that would = the right key then...
as said. open your nand check the drive key in the nand and make sure it matches the drive key on the drive.....

[Ded Games]

Yes have checked and DVD-KEY is correct with the DVD-KEY Nand / CPU KEY.

Note: With the DVD-KEY wrong, Run Games (Demo) the hard drive, DVD Movies and starts normally.

Thank you.

[ReverseAffect]

oh ok. you are saying some games laggie or stop? freeze?

[Ded Games]

Sorry buddy, my translator did not translate into English properly.

I mean it runs games demos hard drive, and start movies, when this with DVD-KEY wrong.

Sorry for the misunderstanding.

Thank you.

[alexxandrepeixoto]

E ai André ta levando surra com seus Xbox da vida fala ai qualé já resolveu???

[Arakon]

this is an english forum. stick to that please.

[ss3goku]

if you mod the Drive with a bad DVDKey...the drive works ONLY for watching a DVD movie...
the rest of system loads normally....
that's why i tell you..... Dump the drive's firmware and then use "360 Firmware Tool" to see if everything it's OK!!  ( may the drive you're using now it's configured for spoofing another model or maybe you're injecting the wrong dvdkey )

[Ded Games]

Hello friend, first I thank the great help of you all, thank yourself.

I managed to solve the problem on two islands, as follows:

I put in the firmware of the information that he was a parody of another unit, even if not. If I put the FW of my Benq drive the information that he was Spoof Samsung MS28 drive, and it worked 100%.

I did this for Jungle Flasher, loaded the FW of the Benq and Samsung in the Jungle Spoof Flasher and did, then the Jungle Flasher left a record of my FW it was a Spoof of Samsung, and then it worked 100%
(You can also make the option "Manual Spoof)

I could not even make them work with the original drive unit, with only units Spoof, but this is no problem, maybe with some more testing I fix it.

Information is here for those who are having the same problem I had.

Those who want more information please contact me at my e-mail: dedgames_andre_@hotmail.com

Problem solved.

Thank you all.

If one day you come to Brazil, to know that you have a friend La.

Excuse my English.

[Ded Games]

E ai André ta levando surra com seus Xbox da vida fala ai qualé já resolveu???

Opa, tudo bom, é bom ver alguém falando em Português por aqui, consegui resolver sim, o pessoal do Xbox Hacker possuem bastante informações dessas modificações mais avançadas, informações que infelizmente ainda não temos nos nossos fóruns brasileiros.

Obrigado pelo comprimento.

Qualquer problema com games,fique à-vontade em entrar em contato.

Abraços.

[ReverseAffect]

Ded Games, glad you have it sorted