XBR V0.5 For All Models

[ww735215]

XBR_Falcon_8955_1.bin has released.does anybody test it?

[MastaG]

Lets say your original backup is made by an infectus or cygnos, then we have to use only upercase switches right?

nandpro orig.bin: -R16 kv.bin 1 1
nandpro orig.bin: -R16 config.bin 3de 2
nandpro XBR.bin: -W16 kv.bin 1 1
nandpro XBR.bin: -W16 config.bin 3de 2

Then flash XBR.bin with the Infectus Programmer or cygnos toolbox.

I'm using an infectus2
Using nandpro orig.bin: -r16 rawkv.bin 1 1 and nandpro XBR.bin: -w16 kv.bin 1 1 to read/inject my KV I got RROD or funny light three
Using nandpro orig.bin: -R16 rawkv.bin 1 1 and nandpro XBR.bin: -W16 kv.bin 1 1 to read/inject my KV I got E71 (Xell is loading fine though..)

However..my infectus won't write nothing with original diagram + JTAG wires connected..is that normal??
Every time I want update NAND I've to disconnect JTAG and use voltage fix...it's kinda boring...gonna search/ask on infectus forum later too...

Yes that's normal, You'll have to disconnect the 330ohm resistors before write or else the infectus will fail at 0x0000000 and you'll have to do the bad-flash fix.
I've got it work with the capital -R and -W.
With lower-case you'll get the xmass tree indeed.
Just disconnect the jtag wires.
nandpro orig.bin: -R16 kv.bin 1 1
nandpro XBR.bin: -W16 kv.bin 1 1
Get Redline's Xell, nandpro XBR.bin: +W16 xell-1f.bin 30
Flash XBR.bin with infectus programmer (erase first).
Power-off console and reconnect jtag wires (I used the switching diodes instead of the 330ohm resistors).

It works here and I didn't do the config block (what does it do anyways?)

[keine]

@jelle2503 or anyone who knows.


What is this xex loader business.......

I've seen it twice, once loaded on HD or somewhere  and most recently in jelle2503's post, loaded from disc.

Is this still """""private"""""       software.

How was this coded most likely?

Side Note:

How do we start coding homebrew?

[rkkman]

@keine
Check this out here - While this doesn't show the loader it will help you get the idea on what you will have to do to make one.  His other video does show the loader

1. http://www.youtube.com/watch?v=I0wHm9jNdbs

2. http://www.youtube.com/watch?v=30_-t6BLSSw

I just did it with Mame and it worked.  The only thing I cant figure out is how to edit the ini to read the roms location.  Can anyone help?

Thanks

[NotMe]

run your arcade games on XBR1 without repackaging (only from CD it appears at the moment): http://forums.xbox-scene.com/index.php?s=&showtopic=697948&view=findpost&p=4581725

[B1N4RY]

How do we start coding homebrew?

You can get started using XNA, or if you have it, the official SDK.

[keine]

@rkkman
@B1N4RY

Thankyou
that answers all my questions and more.
now to start coding. !!!!

I wonder what kind of function calls they are utilizing to load USB......hmmm.

[humor]

ok.....my xbox has survived!! :PPPP
so i have a valid backup.....
i have to stop to try with the xbr or i have some chances ??

hi,have you try the latest version of nandpro B ? some one said the older version doesn't work properly

[zouzzz]

run your arcade games on XBR1 without repackaging (only from CD it appears at the moment): http://forums.xbox-scene.com/index.php?s=&showtopic=697948&view=findpost&p=4581725

Hi,

Only replace 0x22C to 0x25F ?

Hex replace :

Code:

FF FF FF FF FF FF FF FF 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

??
Thanks.

[ss3goku]

ok....let's start to insult me!!

the CD & CB version are not included in the nand?
So....if i reflash my Nand with the XBR_Falcon_8955 image...with my kv injected..why it doesn't work ??
I mean....Ok i have a Falcon with: CB 5771, CD 8453...and i can't do this patch for this damned version...
but if i take another nand backup ( not mine ) that has a vulnerable version of CD ....can i inject my kv and config ....and start with this XBR trick ??

[Arakon]

The homebrew/exploit lock is done in the CPU, there is no way to make a non-exploitable console exploitable.

[ss3goku]

ok got it... so the real protection is inside che cpu and no matter what i write in the nand......it will be always the same result......right ??


Arakorn.........FIND THE WAY TO UNLOCK THIS CPU ISSUE!!!!! :PP

[Gazcoigne]

Arakorn.........FIND THE WAY TO UNLOCK THIS CPU ISSUE!!!!! :PP

rofl yea like he can do that alone (no offense arakon simply ridiculing his demands)

and also as if he will do it now that you have mistyped his name.

[ss3goku]

Arakorn.........FIND THE WAY TO UNLOCK THIS CPU ISSUE!!!!! :PP

rofl yea like he can do that alone (no offense arakon simply ridiculing his demands)

and also as if he will do it now that you have mistyped his name.

as you can see.......at the end of the phrase there's an emoticon --> :PP   
this means that i'm joking..... so yeah ....i'm ridicoulus
and then...sorry ARAKON ...i have mistyped your name

[jelle2503]

ss3goku do you even read what's on this forum i suppose not

Arakorn XD
 
anyway the XEXloader is not yet public. should be soon enough tho when a beta will hit.
ima flash _1 , and get stuff to load from HDD i like it

[le_uberfry]

aka Ron

[jelle2503]

@ tuxuser which xell payload did you use? I think i saw a dvd key on the screen with Xell so that means it's redline's Xell payload right?

[ww735215]

I tested  xbr_falcon_1.bin , i am not success ,just e79. i have injuect kv,config.
now i try again.does anyone has same problem?

[Arakon]

Did you wire up the jtag points (with the two diodes)?

[ww735215]

Did you wire up the jtag points (with the two diodes)?

yes,i have.
 i can enterinto xell through xbox-button.
i flash it again with nandprob,just chrismas light.no succes.
now ,i flash it with inject kv no config.but still no success..maybe xbr_falcon_1 only support 6*** ,no support 7357 and 7371 .