My problem is that i get the blank screen after inserting my KV and flashing XBR. Im sure someone herre can point me in right direction.
-Xenon with redline xell previously/currently working. (3x330 ohm resistors) No dvd drive, Bad block 61 on nand. PAL AUS system, dash 6717 i think
-Backup nands seem corrupt, i dumped 3 times a month or so ago never checked for a match
Ive tried flashing all 3 back and get error 71.
-KV in corrupt backup nand dumps seems fine when I open in 360 flash tool, I can see dvd key/OSIG/region and all details appear correct. I can also extract my KV this way with no errors.
-I used nandpro orig.bin: -r16 kv.bin 1 1
to get the KV file.
-I flashed XBR using nandpro lpt: -w16 xbr.bin
-I flashed the kv.bin file to nand using nandpro lpt: -w16 kv.bin 1 1
-Xbox turns on but no video signal, middle light flashes (normal with no dvddrive)
-Ive also tried patching the KV to XBR.bin then flashing with the same results
-Interestingly when I flash an untouched XBR.bin i do not get xmas lights, like others
-Im currently trying to patch the KV via hex 0x4200 size 0x4200, ima hex noob
is it normal for the file to take over an hour to save once ive patched our KV in its only 16kb right???
-Also got frustrated and reflashed xell to make sure i dont have a complete brick....it boots fine with xenon_hacked.bin flashed
Hope its just something simple, any ideas guys?