need help with dvd-r dl

[saeedkunna]

hi

i want to know if there is a certen way to burn 360 backup on dvd-r dl

i know +r dl is the best choise for 360 backup but its  expinsive and rare here not like -r dl which is good price and easy to found


anyway i searched over this and found out that i cant set the break point on the  -r dl and i have to use certen imgbnurn ver which had a setting for the -r dl media called (layer jumping)

i ve tried it on 5 discs 4 disck didnt work on my lite on 360 and give me this msg(disc unreadble clean the disc>>>>>>)
then i changed the write mode from dao to the other choise (dont remember it)
the last one worked perfctly just like my +r dl then

i got excited and bought another 10 and try again with same setting with no sucess !!!

[saeedkunna]

is there any way rebuild the iso and reset the layer break from 1913760 to the last sector addrass on L0
which i think will make it work on -r dl

[Tony_Amigozs]

is there any way rebuild the iso and reset the layer break from 1913760 to the last sector addrass on L0
which i think will make it work on -r dl

so you bought 10 more -DL discs but no success.. ,what happened do you get error while burning or will they not boot..?

and to answer your question you can't just rebuild the iso to change layerbreak cause then ixtreme firmware will not recognize it as a game disc..security sector and all kind of other $#!t needs to be in that specific layer break position.
so no you can not change that.. but if you did get an working game on a -R DL dual layer disc then more should be possible......its probable that you bought the same disc but perhaps they are from a different manufacturer that can mess things up as well.

[saeedkunna]

is there any way rebuild the iso and reset the layer break from 1913760 to the last sector addrass on L0
which i think will make it work on -r dl

so you bought 10 more -DL discs but no success.. ,what happened do you get error while burning or will they not boot..?

and to answer your question you can't just rebuild the iso to change layerbreak cause then ixtreme firmware will not recognize it as a game disc..security sector and all kind of other $#!t needs to be in that specific layer break position.
so no you can not change that.. but if you did get an working game on a -R DL dual layer disc then more should be possible......its probable that you bought the same disc but perhaps they are from a different manufacturer that can mess things up as well.

the burning went very well but they are not booting give this msg(clean the disc with soft>>>>)

i used the same exact discks !!

some one told me it was luck with that working disc

any idias??

[Tony_Amigozs]

is there any way rebuild the iso and reset the layer break from 1913760 to the last sector addrass on L0
which i think will make it work on -r dl

so you bought 10 more -DL discs but no success.. ,what happened do you get error while burning or will they not boot..?

and to answer your question you can't just rebuild the iso to change layerbreak cause then ixtreme firmware will not recognize it as a game disc..security sector and all kind of other $#!t needs to be in that specific layer break position.
so no you can not change that.. but if you did get an working game on a -R DL dual layer disc then more should be possible......its probable that you bought the same disc but perhaps they are from a different manufacturer that can mess things up as well.

the burning went very well but they are not booting give this msg(clean the disc with soft>>>>)

i used the same exact discks !!

some one told me it was luck with that working disc

any idias??

even if the disc is the same brand and same label its very much possible that its a different manufacturer.. look what Imgburn provides for details on the working DL disc and the Non working ones.. Imgburn displays the manufacturer information. go look upon that and post it here.

[saeedkunna]

ok i tried to see the reading from imgburn the drive couldnt read both the working disc and the others
i dont know maybe this (princo) not good media i will buy another dvd's maybe sony or verb and try again

btw i found a program called mRDL1.1  it suposse to be for burning xbox iso on dvd-r dl
i tried it but it gives me an error msg in 50% from burning process and stop
 

[Arakon]

princo is total garbage.

[saeedkunna]

test num15
Pro Evolution Soccer 2010 wav3 pal
burned sucssfully on princo dvd-r dl
the game start till i see stars on left down corner on screen then hang

HL-DT-ST DVD-RAM GH22NP20 1.00 (ATA)
Current Profile: DVD-R DL

Disc Information:
Status: Complete
Erasable: No
Sessions: 1
Sectors: 3,813,440
Size: 7,809,925,120 bytes
Time: 847:27:65 (MM:SS:FF)
Supported Write Speeds: 4x

DVD±R DL Boundary Information:
L0 Data Zone Capacity: 1,913,760
Changeable: No

DVD-R DL Shifted Middle Area:
Start Address: 1,913,760
Changeable: Yes

DVD-R DL Manual Layer Jump:
Address: 4,294,770,688

Pre-recorded Information:
Manufacturer ID: PRINCORDL05

Recording Management Area Information:
HL-DT-ST DVD-RAM GH22NP20

Physical Format Information (Last Recorded):
Disc ID: 0-00
Book Type: DVD-R
Part Version: 15
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 0
Last Physical Sector in Layer 0: 2,289,503

Layer Information:
Layer 0 Sectors: 2,092,896 (54.88%)
Layer 1 Sectors: 1,720,544 (45.12%)

[Tony_Amigozs]

try different media or burn on lower speed... , or just try to buy +R DL somewhere cheap..

[duggyuk]

Take those Princo discs and throw them in the bin, worst media EVER made....